Exhibit 10.17
PRODUCT MANUFACTURING AND SUPPLY AGREEMENT (BUY-SELL)
BY AND BETWEEN
FLEX LTD.
AND
AXIOM SOLUTIONS INTERNATIONAL, INC.
DATED AS OF []
PRODUCT MANUFACTURING AND SUPPLY AGREEMENT (BUY-SELL)
This PRODUCT MANUFACTURING AND SUPPLY AGREEMENT (this “Agreement”), dated as of [], 2027 (the “Effective Date”), is entered into by and between Flex Ltd., a Singapore registered public company limited by shares and having company registration no. 199002645H (“RemainCo”), and Axiom Solutions International, Inc., a Texas corporation (“SpinCo”) (each of RemainCo and SpinCo, a “Party,” and collectively, the “Parties”).
RECITALS
WHEREAS, RemainCo and SpinCo, or certain of their respective Affiliates, have entered into that certain Separation and Distribution Agreement, dated as of [], 2026 (together with all exhibits and schedules thereto, the “Separation Agreement”);
WHEREAS, the Separation Agreement contemplates that RemainCo and SpinCo will execute this Agreement, and this Agreement is being entered into by the Parties to satisfy the requirements described therein; and
WHEREAS, from time to time during the term of this Agreement, each of RemainCo and SpinCo desires to engage the other to manufacture, package, label and ship the Products (as defined below), on the terms and conditions set forth in this Agreement.
NOW, THEREFORE, in consideration of the foregoing and the mutual agreements, provisions and covenants contained in this Agreement, the Parties hereby agree as follows:
ARTICLE 1
DEFINITIONS AND INTERPRETATION
Section 1.1 Definitions . Capitalized terms used but not otherwise defined herein shall have the meanings given to them in the Separation Agreement. As used in this Agreement, the following terms have the respective meanings set forth below:
(a) “Acceptance Period” has the meaning set forth in Section 8.1.
(b) “Affiliate” means, when used with respect to a specified Person, a Person that directly or indirectly, through one or more intermediaries, controls, is controlled by, or is under common control with such specified Person. For the purposes of this definition, “control” (including the terms “controlled by” and “under common control with”), when used with respect to any specified Person shall mean the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of such Person, whether through the ownership of voting securities or other interests, by Contract or otherwise. It is expressly agreed that no Party or member of either Group shall be deemed to be an Affiliate of the other Party or member of such other Party’s Group solely by reason of having one or more directors in common or by reason of having been under common control of RemainCo or RemainCo’s shareholders prior to, or in the case of SpinCo’s stockholders, after the Effective Date.
(c) “Agreement” has the meaning set forth in the Preamble to this Agreement.
(d) “Applicable Customer Requirements” means the quality requirements, performance requirements, service levels, delivery requirements, capacity requirements, audit and inspection rights, acceptance criteria, return procedures, cancellation and rescheduling procedures, end-of-life procedures, customer claim procedures, Incoterms, title-transfer requirements, shipment-hold rights, premium-freight requirements, safety-stock requirements, minimum-order requirements and other obligations under Recipient’s agreement with the applicable Customer that are expressly identified in the applicable Contract Supplement as obligations of Provider with respect to the applicable Product. Provider shall comply with all Applicable Customer Requirements identified or referred in the applicable Contract Supplement. Recipient shall promptly notify Provider of any Customer-driven change to an Applicable Customer Requirement. Any such change shall require mutual agreement between the Parties before implementation and shall be implemented in accordance with Sections 2.3 and 7.1(c), including an equitable adjustment to pricing, lead times, inventory responsibility or other affected terms if the change increases Provider’s costs, overhead, liability, obligations or risks.
(e) “Approved Vendor List” or “AVL” means the bill of material or similar list provided by Recipient or Customer, as the case may be and approved by Recipient if provided by Customer to Provider, that determines the vendors from which Provider must purchase Materials, and may include, but is not limited to, original equipment manufacturers, resellers, distributors, or brokers.
(f) “Background IP” has the meaning set forth in Section 13.1(a).
(g) “Business Day” means any day except Saturday, Sunday or any other day on which commercial banks in (i) New York, USA, (ii) the respective location of the registered office of the relevant Provider or (iii) the respective location of the registered office of the relevant Recipient, in each case, are authorized or required by Law to be closed.
(h) “Change Orders” means any written change order amending a Contract Supplement, which will require mutual agreement between the Parties before implementation.
(i) “Confidential Information” has the meaning set forth in Section 12.1.
(j) “Contract Supplement Term” has the meaning set forth in Section 9.1(b).
(k) “Contract Supplements” means the contract supplements attached hereto as Exhibit A (as such schedule may be amended, modified or supplemented from time to time in accordance with the terms of this Agreement).
(l) “Customer” means, with respect to a Product, the Third Party customer to whom Recipient or its applicable Affiliate sells or supplies such Product or a product into which such Product is incorporated, as identified in the applicable Contract Supplement.
(m) “Disclosing Party” has the meaning set forth in Section 12.2.
(n) “Economic Order Inventory” means Materials purchased in quantities above the required amount for Purchase Orders or Forecast Load in order to achieve price targets for such Materials.
2
(o) “Effective Date” has the meaning set forth in the Preamble to this Agreement.
(p) “Epidemic Failure” means, during the Warranty period, Customer returns:
| | at least 3 percent of delivered Product with a substantially similar workmanship failure within any one-year period; |
| | at least 2 percent of the delivered Product with substantially similar workmanship failure within 90 days; or |
| | the Product causes a safety issue or poses a safety hazard, |
in each case due to a manufacturing and workmanship defect in the Product.
(q) “Excess Inventory” has the meaning set forth in Section 5.2.
(r) “Force Majeure Event” has the meaning set forth in Section 14.1.
(s) “Forecast” has the meaning set forth in Section 3.1.
(t) “Forecast Load” has the meaning set forth in Section 3.1.
(u) “Indemnifying Party” has the meaning set forth in Section 10.3.
(v) “Inventory” means all, whether on-hand, in-transit, or on order: (1) Materials, or (2) work-in-progress (WIP), partially completed Product, or (3) Special Inventory, or (4) Product.
(w) “Lead Time” means Materials Procurement Lead Time plus the Manufacturing Lead Time.
(x) “Manufacturing Lead Time” means, in respect of each Product, the manufacturing cycle time required from the delivery of the Materials at Provider’s facility to the completion of the manufacture, assembly and test processes.
(y) “Markup” means, in respect of a Product, the markup calculated in accordance with Section 3.3, as such calculation may be modified for such Product in the applicable Contract Supplement in accordance with Section 2.2.
(z) “Materials” means components, parts, raw materials and subassemblies that comprise the Product and that appear on the bill of materials for the Product.
(aa) “Materials Procurement Lead Time” means, with respect to any particular Material, the longer of (i) the lead time to obtain such Materials as recorded on Provider’s system of record and (ii) the actual lead time.
3
(bb) “Minimum Order Inventory” means Materials purchased in excess of requirements for Purchase Orders or Frozen Forecast Period because of minimum lot sizes required by the vendor.
(cc) “MRB” has the meaning set forth in Section 4.
(dd) “Net Working Capital” means, with respect to a Recipient or Provider, (a) the aggregate book value of (i) inventory (including Materials, work-in-progress, and Products), (ii) accounts receivables, less (b) (i) accounts payable including goods receipt no invoice (GRNI), (ii) any working capital advances including cash in advance payments or deposits from the Customer and (iii) any capitalized purchase price variance (“PPV”).
(ee) “Non-Complying Material” means Material shipped by Supplier to Provider that fails to meet Specifications, purchase order requirements, quality standards, or is unusable, damaged or defective upon delivery.
(ff) “Party” has the meaning set forth in the Preamble to this Agreement.
(gg) “Person” means any individual, firm, corporation, partnership, limited liability company, trust, joint venture, Governmental Entity or other entity.
(hh) “Price” has the meaning set forth in Section 3.3
(ii) “Product” means the products manufactured for the applicable Customer as of the Effective Date.
(jj) “Product Improvement” has the meaning set forth in Section 13.1(b).
(kk) “Production Materials” means materials (excluding Materials) that are consumed in the production processes to manufacture Products including solder, epoxy, cleaner solvent, labels, flux and glue.
(ll) “Provider” means any member of the (i) RemainCo Group, with respect to the Products to be provided by or on behalf of RemainCo to any member of the SpinCo Group, and (ii) SpinCo Group, with respect to the Products to be provided by or on behalf of SpinCo to any member of the RemainCo Group, in each case, as provided in each Contract Supplement.
(mm) “Provider Inventory Responsibility” has the meaning set forth in Section 4.3.
(nn) “Provider Materials” means those Materials or Production Materials, if any, that the applicable Contract Supplement expressly identifies as to be procured by Provider.
(oo) “Purchase Order” has the meaning set forth in Section 3.2(b).
(pp) “Quarterly Business Review” has the meaning set forth in Section 15.1.
(qq) “Receiving Party” has the meaning set forth in Section 12.2.
4
(rr) “Recipient” means any member of the (i) RemainCo Group, with respect to the Products to be supplied by or on behalf of SpinCo to any member of the RemainCo Group, and (ii) SpinCo Group, with respect to the Products to be supplied by or on behalf of RemainCo to any member of the SpinCo Group, in each case, as provided in each Contract Supplement.
(ss) “Recipient-Exclusive Materials” has the meaning set forth in Section 4.5.
(tt) “Recipient Indemnified Parties” has the meaning set forth in Section 10.1.
(uu) “Recipient Inventory Responsibility” has the meaning set forth in Section 4.3.
(vv) “Recipient Materials” means all Materials other than the Provider Materials, in each case procured by Recipient and sold to Provider for use in connection with the Services.
(ww) “Recipient Materials Lead Time” means, in respect of each Recipient Material, the minimum delivery arrival lead time (i) as set forth next to each Recipient Material in the Contract Supplement or (ii) as otherwise mutually agreed in writing by the Parties in good faith.
(xx) “RemainCo” has the meaning set forth in the Preamble to this Agreement.
(yy) “Separation Agreement” has the meaning set forth in the Recitals.
(zz) “Services” has the meaning set forth in Section 2.1(b).
(aaa) “Special Inventory” means any Minimum Order Inventory, Economic Order Inventory, safety stock, buffer stock, last-time buys and other mutually-agreed Inventory acquired by Provider in excess of the Purchase Orders or Forecast Load to support manufacturability or demand requirements.
(bbb) “Specifications” means the agreed detailed instructions provided by Recipient or Customer as of the Effective Date defining each Product, which shall include bills of materials, designs, schematics, assembly drawings, process documentation, test specifications, current revision number or any other requirements and an Approved Vendor List.
(ccc) “SpinCo” has the meaning set forth in the Preamble to this Agreement.
(ddd) “Subcontractor” has the meaning set forth in Section 2.3.
(eee) “Supplier” means the supplier of Materials that sells such Materials to Recipient but delivers them directly to Provider in accordance with the purchase terms agreed between Recipient and such Supplier.
(fff) “Taxes” means federal, state and local excise, sales, use, VAT, and transfer taxes and similar charges. For clarity, “Taxes” do not include taxes based on the net income of Provider or on real estate property owned by Provider.
5
(ggg) “Tax Matters Agreement” means the Tax Matters Agreement, dated as of [], 2026, by and between RemainCo and SpinCo (together with all exhibits and schedules thereto).
(hhh) “Term” has the meaning set forth in Section 9.1(a).
(iii) “Third Party” means any Person other than RemainCo, SpinCo and their respective Affiliates.
(jjj) “Total Material Cost” means, with respect to a Product, the amount calculated in accordance with the “Total Material Cost Calculation” set forth in the applicable Contract Supplement for such Product.
(kkk) “Total Net Manufacturing Cost” means, the total manufacturing cost incurred by Provider to manufacture, including but not limited to, materials, inbound and outbound freight, facility costs, fully burdened labor costs, depreciation on generic equipment, customs duties, PPV and non-recoverable Taxes. For clarity, the full list of elements will be captured in Parties’ operating document as per P/L accounts.
(lll) “Trade and Regulatory Requirements” has the meaning set forth in Section 4.5.
(mmm) “True-Up” has the meaning set forth in Section 3.5(a).
(nnn) “Underutilization Costs” means the reasonable, documented costs incurred by Provider as a result of underutilization of production capacity in the event that Recipient’s actual purchased volume of Products is less than the volume included in the Forecast, including facility costs, equipment costs and amortization, labor costs and other similar costs related to preparing for or continuing the mass production of the Products.
(ooo) “Working-Capital Neutrality” means the principle that the provision or receipt of Services under this Agreement shall not cause a material change in the Net Working Capital of the applicable Recipient or Provider in accordance with Section 3.8.
Section 1.2 References; Interpretation. For the purposes of this Agreement, (a) words in the singular shall be held to include the plural and vice versa, and words of one gender shall be held to include the other gender as the context requires; (b) references to the terms Article, Section, paragraph, clause and Exhibit are references to the Articles, Sections, paragraphs, clauses and Exhibits to this Agreement unless otherwise specified; (c) the terms “hereof,” “herein,” “hereby,” “hereto,” and derivative or similar words refer to this entire Agreement, including the Exhibits hereto; (d) references to “$” shall mean U.S. dollars; (e) the word “including” and words of similar import when used in this Agreement shall mean “including, without limitation,” unless otherwise specified; (f) the word “or” shall not be exclusive (unless the context indicates otherwise); (g) references to “written” or “in writing” include in electronic form; (h) the Parties have each participated in the negotiation and drafting of this Agreement, and except as otherwise stated herein, if an ambiguity or question of interpretation should arise, this Agreement shall be construed as if drafted jointly by the Parties and no presumption or burden of proof shall arise favoring or burdening any Party by virtue of the authorship of any of the provisions in this Agreement; (i) a reference to any Person includes such Person’s successors and permitted assigns; (j) any reference to “days” means calendar days unless Business Days are expressly specified; (k) when calculating the period of time before which, within which or following which any act is to be done or step taken pursuant to this Agreement, the date that is the reference date in calculating such period shall be excluded and if the last day of such period is not a Business Day, the period shall end on the next succeeding Business Day; (l) any statute or Contract defined or referred to herein means such statute or Contract as from time to time amended, modified or supplemented, unless otherwise specifically indicated; (m) the use of the phrases “the date of this Agreement,” “the date hereof,” “of even date herewith” and terms of similar import shall be deemed to refer to the date set forth in the Preamble to this Agreement; (n) the phrase “ordinary course of business” shall be deemed to be followed by the words “consistent with past practice” whether or not such words actually follow such phrase; (o) where a word or phrase is defined herein, each of its other grammatical forms shall have a corresponding meaning; and (p) any consent given by any Party pursuant to this Agreement shall be valid only if contained in a written instrument signed by such Party. Unless the context requires otherwise, references in this Agreement to “SpinCo” shall also be deemed to refer to the applicable member of the SpinCo Group, references to “RemainCo” shall also be deemed to refer to the applicable member of the RemainCo Group and, in connection therewith, any references to actions or omissions to be taken, or refrained from being taken, as the case may be, by SpinCo or RemainCo shall be deemed to require SpinCo or RemainCo, as the case may be, to cause the applicable members of the SpinCo Group or the RemainCo Group, respectively, to take, or refrain from taking, any such action.
6
ARTICLE 2
MANUFACTURING SERVICES
Section 2.1 Services. Subject to the terms and conditions of this Agreement and each Contract Supplement, as between the Parties:
(a) Recipient shall procure from Supplier, sell and deliver (via Supplier) to Provider all Recipient Materials, and Provider shall purchase such Recipient Materials from Recipient, in each case in accordance with this Agreement, the applicable Contract Supplement, and the Specifications with title and risk of loss passing as provided in Section 2.2 and with the Parties implementing the triangular invoicing process set forth in the applicable Contract Supplement;
(b) Provider shall (i) where the applicable Contract Supplement expressly so provides, procure the Provider Materials, (ii) manufacture, assemble, test, package and label the Products, (iii) supply the Products to Recipient, and Recipient shall purchase such Products from Provider, and (iv) perform the inbound and outbound logistics services expressly set forth in the applicable Contract Supplement, in each case (of the foregoing clauses (i)-(iv)) pursuant to Purchase Orders delivered by Recipient to Provider and in accordance with this Agreement, the applicable Contract Supplement, the Specifications and the Applicable Customer Requirements (such Provider activities, collectively, the “Services”).
Section 2.2 Contract Supplements. The general terms and conditions set forth in this Agreement shall govern each Contract Supplement and shall supersede and take priority over any contrary or inconsistent terms set forth in any Contract Supplement, except as expressly provided in this Section. The Contract Supplement of this Agreement shall identify the Term for each Customer and/or Product under the buy-sell arrangements. To the extent applicable, each Contract Supplement shall set forth or refer to the Customer-specific and Product-specific pricing, Lead Times, Forecast and S&OP procedures, Applicable Customer Requirements and those Customer-specific terms shall control over any additional terms of this Agreement solely with respect to the Products and Customer covered by such Contract Supplement.
7
Section 2.3 Operational Changes. Ordinary-course operational or administrative adjustments to any Contract Supplement that do not materially change the scope of Services or obligations of the Parties or the working-capital neutrality principles explained later in this Agreement, may be documented by a Change Order following discussion at the Quarterly Business Review or otherwise as mutually agreed in writing by the Parties. Each Change Order must be mutually agreed in writing and executed by each Party. Any other changes to the terms of this Agreement or any Contract Supplement must be made by a written amendment executed by each Party in accordance with Section 16.6.
Section 2.4 Subcontracting. Provider shall have the right to subcontract its obligations under this Agreement to: (i) any of its Affiliates; (ii) any other Third Parties that have been approved in advance in writing by Recipient (such approval not to be unreasonably withheld, conditioned or delayed); and (iii) any Third Party engaged by Recipient to provide freight delivery services, if any (each, a “Subcontractor”). No such subcontract by Provider shall, as between Provider and Recipient, modify any terms of this Agreement or any Contract Supplement, and such subcontract shall not relieve Provider of any of its obligations hereunder. Provider will remain liable to Recipient for any breach or violation of this Agreement by the applicable Subcontractor in connection with such Subcontractor’s activities hereunder.
ARTICLE 3
FORECASTS; ORDERS; FEES; PAYMENT
Section 3.1 Forecasts. Recipient or Customer shall provide Provider (and Recipient) with each Customer forecast for Products under an applicable Contract Supplement (each, a “Forecast”). Provider shall review each Forecast through its sales, inventory and operations planning process against available capacity, Materials and headcount and shall identify any constraint, exception or required mitigation at the next applicable S&OP meeting. The Recipient shall confirm at that S&OP meeting the portion of the Forecast that Provider needs to prioritize and drive (“Forecast Load”). Provider may procure Materials, reserve production capacity and plan production in reliance on the Forecast Load. If any Customer has requirements to hold safety stocks, vendor managed inventory requirements, or warehousing requirements set forth in the applicable Contract Supplement, Provider shall comply with such requirement and pass through the cost of such requirement to Recipient. Customer forecasting terms expressly identified in the applicable Contract Supplement shall be mirrored between the Parties. If a reduction in the Forecast Load results in Underutilization Costs, Provider shall first use commercially reasonable efforts to mitigate those costs, including by reallocating capacity, materials and labor, and Recipient shall reimburse Provider for the remaining Underutilization Costs.
8
Section 3.2 Purchase Orders.
(a) For Products. Recipient shall submit all Purchase Orders for the Products, each of which shall incorporate by reference the terms and conditions of this Agreement and the applicable Contract Supplement and shall specify the Product volumes and delivery dates for the Products, via email or other method agreed upon in writing between the Parties, to Provider. Unless otherwise specified in the applicable Contract Supplement, specific to Product Purchase Orders, Provider shall confirm each Purchase Order by submitting an acknowledgment via response email or other method agreed upon in writing between the Parties as soon as reasonably practicable and in no event later than two (2) Business Days after receipt of such Purchase Order. Failure of Provider to respond within such period shall be deemed confirmation of the Purchase Order. For the avoidance of doubt, unless agreed by Provider in writing, any variations made to the terms and conditions of this Agreement or the applicable Contract Supplement by Recipient in any Purchase Order are void and have no effect.
(b) For Recipient Materials. Provider shall submit purchase orders to Recipient for the Recipient Materials required to fulfill accepted purchase orders for Products and the non-binding production plan confirmed under Section 3.1, each of which shall incorporate by reference the terms and conditions of this Agreement and the applicable Contract Supplement and shall identify the applicable Recipient Materials, quantities, prices, Incoterms, delivery points and requested delivery dates, in accordance with the ordering process and schedule timeline set forth in the applicable Contract Supplement. The Parties shall implement the triangular invoicing process specified in the applicable Contract Supplement in respect of sales of Recipient Materials by Recipient to Provider. Each purchase order submitted under Section 3.2 is a “Purchase Order.” For clarity, specific to this Agreement, the Supplier shall notify Provider directly when the Recipient Material is ready to be shipped based on the delivery dates outlined in the Purchase Order between Recipient and Supplier.
(c) If any of the Recipient Materials to be delivered by Supplier to Provider in connection with a Materials Purchase Order: (i) are not delivered to comply with, or in advance of, the applicable Recipient Materials Lead Time (or another delivery date mutually agreed in writing by the Parties that is in advance of the production schedule necessary to manufacture and produce the Products in accordance with the relevant Purchase Order) through no fault of Provider; (ii) do not conform to the agreed-upon quantity and the supplied quantity is not adequate for Provider to produce the amount of Product that is the subject of such Purchase Order; or (iii) are Non-Complying Material after Provider’s reasonable inspection, then Provider may (x) reduce the quantity of Recipient Materials to be delivered under such Purchase Order in proportion to such untimely, inadequate or Non-Complying Material and/or (y) reject the Recipient Materials that are untimely delivered pursuant to clause (i) above or are Non-Complying Material and return such Recipient Materials to Supplier (upon notice to Recipient) from Provider, in each case, at Recipient’s sole cost and expense, and notwithstanding anything to the contrary in this Agreement, Provider shall have no liability for any such returned Recipient Material or reduction of Product delivered under such Purchase Order.
Section 3.3 Pricing. With respect to each Product supplied under a Contract Supplement, the price for such Product (“Price”) shall be equal to the sum of (a) the defined standard price for the Recipient Materials incorporated into such Product, without any Markup, plus (b) the Total Material Cost for any Provider Materials incorporated into such Product, plus (c) the Total Net Manufacturing Cost for such Product, plus (d) a Markup equal to ten percent (10%) of the labor and depreciation components included in Total Net Manufacturing Cost, unless a different Markup is expressly set forth in the applicable Contract Supplement. In no event shall the Markup for any Product exceed the maximum Markup or margin set forth in the applicable Contract Supplement. The applicable Contract Supplement shall identify the cost categories included in Total Material Cost and Total Net Manufacturing Cost, the cost categories to which the applicable Markup applies, the applicable Markup amount or percentage, any region-specific pricing assumptions, any maximum Markup applicable to such Product and the pricing treatment for Recipient Materials and Provider Materials (as applicable). Provider shall not charge any Markup, fee or cost that is not authorized by this Agreement or the applicable Contract Supplement.
9
Section 3.4 Taxes. Recipient or Customer shall be responsible for all Taxes.
Section 3.5 Inflation, Exchange Rates and Tariffs.
(a) At each Quarterly Business Review, the Parties shall review and adjust the fees and prices payable under this Agreement and each Contract Supplement to account for changes in currency exchange rates, inflation, storage, underutilization claims and tariffs in accordance with this Section 3.5 (each, a “True-Up”). Each True-Up shall apply to Products shipped during the immediately preceding calendar quarter and, once determined in accordance with this Section 3.5, shall be reflected as a credit or debit, as applicable, in the next invoice issued following the applicable Quarterly Business Review.
(b) Tariff True-Up. If, during any calendar quarter, Provider pays or receives a refund, credit, rebate or drawback for any tariff, customs duty, import duty, export duty, trade remedy duty or similar governmental charge (“Tariff”) incurred on procurement of Materials or Products used, manufactured or shipped under this Agreement, the amounts invoiced and paid for Products shipped during such calendar quarter shall be increased or decreased, as applicable, by the amount of such charge or refund, credit, rebate or drawback actually paid or received by Provider, net of any amounts already included in the price of such Products. Provider shall use commercially reasonable efforts to pursue any refund, credit, rebate or drawback that is reasonably available and would reduce amounts payable by Recipient. For clarity, Provider has the right to invoice the Recipient on a monthly basis for any Tariff charges incurred during the quarter.
(c) Underutilization True-Up. Where Provider has reserved production capacity, tooling or dedicated resources in reliance on a Forecast or a capacity commitment, and Recipient’s actual Purchase Orders for the affected Products are below such reserved capacity or committed volume for the applicable measurement period, Provider’s claim for under-absorbed costs shall be determined on a case-by-case basis by good-faith analysis of the documented, unavoidable fixed costs actually incurred by Provider with respect to the reserved capacity and not otherwise recovered, net of Provider’s commercially reasonable mitigation as mutually agreed with Recipient (including redeployment of the affected capacity agreed between the parties). The applicable Contract Supplement may specify the capacity baseline, the measurement period and the method for calculating under-absorbed costs.
10
(d) Supporting Information; Disputes. Within thirty (30) days after the end of each calendar quarter, Provider shall use commercially reasonable efforts to deliver to Recipient a statement showing the calculation of each True-Up for such quarter in reasonable detail, together with reasonable supporting documentation, however failure to submit such documentation shall not excuse Recipient’s obligation to review and adjust the prices based on the true — up requirement set forth in this Section 3.5. Recipient may dispute any True-Up by providing written notice to Provider within thirty (30) Business Days after receipt of such statement, specifying the disputed amount and the basis for the dispute in reasonable detail. The Parties shall resolve any such dispute in accordance with Section 15.2. Any undisputed amount shall be reflected as a credit or debit, as applicable, in the next invoice issued following the applicable Quarterly Business Review.
Section 3.6 Payment Terms. Except as expressly provided otherwise in the applicable Contract Supplement:
(a) Invoicing and Payment. Provider shall invoice Recipient for amounts payable under this Agreement or the applicable Contract Supplement. Provider shall invoice Recipient in U.S. dollars with a net 30-day payment term, and Recipient shall pay such undisputed invoice in accordance with the appropriate payment term needed to maintain Working-Capital Neutrality for Provider’s fiscal month end in accordance with Section 3.7.
(b) Disputed Invoices. If Recipient has any reasonable grounds for disputing in good faith any invoiced amounts, as soon as practicable but no longer than thirty (30) Business Days of Recipient’s receipt of the disputed invoice, Recipient shall provide Provider with written notice specifying the amount of the invoice that is disputed and describing in reasonable detail the basis of the dispute. The Parties shall seek to resolve any such dispute in accordance with Section 15.2. Any amounts not disputed in accordance with this Section 3.6(b) shall be deemed accepted and payable as provided in Section 3.6(a).
Section 3.7 Monthly Reconciliation.
(a) Ten (10) Business Days prior to the end of each fiscal month (each, a “Reconciliation Date”), each Provider shall deliver to the applicable Recipient a statement (each, a “Monthly Reconciliation Statement”) setting forth in reasonable detail: (i) all amounts invoiced by such Provider during the current fiscal month, (ii) all amounts paid or payable by Provider in connection with the provisions of the applicable Services during the current fiscal month, (iii) any credits, debits or adjustments arising under this Agreement or any Contract Supplement during the current fiscal month and (iv) a proposed net payable or net receivable balance as between Provider and Recipient for such fiscal month, calculated as a difference between clauses (i) and (ii) above, as adjusted by any amounts described in clause (iii) (the “Net Settlement Amount”).
(b) Provider and Recipient shall cooperate in good faith to review and confirm each Monthly Reconciliation Statement. Within five (5) Business Days after receipt of a Monthly Reconciliation Statement from the Provider (the “Review Period”), the applicable Recipient shall either (i) confirm in writing (including by email) its agreement with the Net Settlement Amount set forth therein, or (ii) deliver to the Provider a written notice of discrepancy specifying, in reasonable detail, the amount in dispute and the basis for the dispute. If the Recipient does not deliver a notice of discrepancy within the Review Period, the Monthly Reconciliation Statement shall be deemed confirmed. The Parties shall resolve any such dispute in accordance with Section 15.2.
11
(c) Upon confirmation (or deemed confirmation) of a Monthly Reconciliation Statement, Provider or Recipient, as applicable, shall net the accounts receivable balances reflected therein, and the Party owing the Net Settlement Amount shall pay such amount to the other Party immediately, but no later than the end of such fiscal month.
Section 3.8 Working Capital Neutrality. The Parties intend that the arrangements under this Agreement be working capital neutral for Provider. Consistent with Section 3.6, the payment schedule, true-up and other mechanics under this Agreement and each Contract Supplement shall be designed and administered so as to achieve, as closely as reasonably practicable, a cash conversion cycle for Provider, attributable to the Services, of zero, taking into account accounts payable, accounts receivables, Working Capital Advances, capitalized PPV and total inventory on hand with Provider. Working capital neutrality shall be measured and trued up on a consolidated basis across the Contract Supplements and, unless otherwise agreed in writing, effected through a single designated account and payment-terms adjustment (including by way of an accounts-payable hold applied to the designated account). The Parties acknowledge that the conveyance of Inventory as of the Effective Date may require additional measures during the initial period to preserve neutrality, and such additional measures shall be agreed to by the parties acting in good faith.
Section 3.9 Order of Preference to Attain Working Capital Neutrality. The Parties shall apply the following procedures, in the order of priority set forth below, to achieve and maintain Working-Capital Neutrality:
(a) If the Net Settlement Amount is payable by Recipient to Provider:
(i) Recipient holds accounts payable to Recipient;
(ii) Recipient shall adjust the payment term to accelerate payment of amounts payable;
(iii) Recipient shall pay the required Working Capital Advance.
(b) If the Net Settlement Amount is payable by Provider to Recipient:
(i) Provider shall refund any excess Working Capital Advance;
(ii) Recipient shall adjust the payment term to defer payment of accounts payable;
(iii) Provider shall adjust the payment term to accelerate payment of accounts payable.
12
ARTICLE 4
MATERIALS PROCUREMENT
Section 4.1 Authorization to Procure Materials and Inventory. Recipient’s approval of Forecast Load shall constitute authorization for Provider to procure Provider Materials and Recipient Materials:
(a) Inventory in amounts reasonably necessary to manufacture the Products covered by such approved Forecast Load or PO based on the applicable Lead Times; and
(b) Minimum Order Inventory reasonably required to support Recipient’s Purchase Orders or Forecast Load.
Section 4.2 Approved Vendor List (AVL). Recipient may provide to Provider and maintain an AVL. If Recipient provides an AVL to Provider with respect to any Provider Materials, Provider shall purchase such Materials only from vendors on such AVL. If agreed by Customer, Recipient may include Provider on the AVL for Provider Materials that Provider can supply. Any changes to an AVL shall be notified by Recipient or Customer to Provider. In the event Customer requests changes in AVL directly to Provider, Provider must agree and align with Recipient before such implementation of change.
Section 4.3 Discontinuance of Materials. Provider shall promptly notify Recipient upon becoming aware that any Supplier has discontinued, or intends to discontinue, any Provider Materials for any Product and Recipient shall promptly notify Provider upon becoming aware that any supplier has discontinued, or intends to discontinue, any Recipient Materials, and the Parties shall thereafter cooperate in good faith to assess the expected impact of such discontinuance on Provider’s manufacturing processes, Product performance, cost, lead times and delivery schedules. Any substitute Materials for such discontinued Materials shall be subject to the Parties’ mutual written agreement before implementation.
Section 4.4 Responsibility for Inventory.
(a) Except as set forth in a Contract Supplement and subject to Section 4.6, Provider shall be responsible during the Term for Inventory that Provider purchases for the purpose of manufacturing Recipient’s Products, including Inventory discrepancies, inventory shrinkage and inventory attrition, unusable, lost, or damaged, bonepile resulting from manufacturing process, workmanship defects arising during the Term (“Provider Inventory Responsibility”), except to the extent such Inventory becomes excess, obsolete, or otherwise impaired as a result of Recipient’s instructions, a change in the Applicable Customer Requirements (including bonepile caused by Customer’s specifications), cancellation or delay by Recipient or the applicable Customer or any other matter for which Recipient is responsible under this Agreement or the applicable Contract Supplement (“Recipient Inventory Responsibility”). Provider shall use commercially reasonable efforts to mitigate Inventory costs before invoicing Recipient for Inventory for the Recipient Inventory Responsibility. The Parties shall use best efforts to conduct a full physical inventory of the Inventory existing as of the Effective Date. Parties will review reports regarding Inventory specifically arising from bonepile & Material Review Board (“MRB”) on a weekly basis. Upon expiration or termination of the applicable Contract Supplement, responsibility for remaining Inventory shall transfer to Recipient in accordance with Section 9.3. Recipient shall resolve and close all open Inventory claims, including excess and obsolete inventory claims, within one hundred eighty (180) days after the claim is submitted with reasonable supporting documentation and Recipient shall make best efforts to remove such inventory within 60 days of resolution.
13
(b) To the extent Recipient supplies Provider with Recipient Materials in amounts necessary to manufacture the Products under accepted Purchase Orders, as specified in the applicable Contract Supplement, Provider shall hold such Recipient Materials for a period of up to six (6) months following receipt of such Materials or Recipient Materials of a nature requiring specialized storage materially different than that utilized to store Recipient Materials at the delivery/manufacturing site identified in the relevant Contract Supplement during the Reference Period. Any Recipient Materials held by Provider for over six (6) months shall be repurchased by Recipient at the purchase price paid by Provider to Recipient for such Recipient Materials and returned to Recipient at Recipient’s cost, unless otherwise mutually agreed by the Parties in writing. Any surplus Recipient Materials shall be repurchased by Recipient at such purchase price and returned to Recipient at Recipient’s cost upon expiration or termination of this Agreement or the applicable Contract Supplement. Recipient shall reimburse Provider for any warehousing, storage or related services provided by Provider beyond those required by such Customer terms.
Section 4.5 Consigned Inventory. With respect to any inventory consigned by a Customer or Recipient and held by Provider in connection with the manufacture of Products, the terms of the applicable Customer agreement expressly identified or referred in the applicable Contract Supplement shall be passed through to Provider. Any attrition of, or liability in respect of, such consigned inventory shall be subject to the limitations of liability set forth in Article 11 to the extent not covered by insurance, and responsibility for such inventory while in transit shall be determined by the Incoterms and Customer terms applicable to such shipment.
Section 4.6 Safety Stock; Minimum Orders and Stocking Strategy. Recipient shall be responsible for Minimum Order Inventory, safety stock and other Special Inventory procured in accordance with the applicable Contract Supplement to the extent such Inventory becomes excess or obsolete because of a Customer requirement, Recipient instruction, engineering change, cancellation, rescheduling or termination for which Recipient is responsible.
14
Section 4.7 Trade Regulatory Requirements. Provider shall source Provider Materials in accordance with the Approved Vendor List and the Applicable Customer Requirements. Recipient will source Recipient Materials in accordance with the Applicable Customer Requirements. Each Party shall comply with all applicable Laws relating to trade sanctions, export controls, import restrictions, customs and tariffs, anti-boycott regulations, restricted-party and denied-party screening requirements, and forced-labor and restricted-labor sourcing prohibitions (including the Uyghur Forced Labor Prevention Act, the EU Forced Labor Regulation, and any restrictions applicable to specified entities, materials, regions or countries of origin) (collectively, “Trade and Regulatory Requirements”). Recipient or Customer shall identify and communicate to Provider all Trade and Regulatory Requirements applicable to the Products, including the destinations to which Products or Materials are to be shipped, and the content of the Specifications, the Approved Vendor List and the applicable bill of materials. Recipient shall bear primary responsibility for ensuring that the Specifications, the Approved Vendor List and the Customer requirements conform with all applicable Trade and Regulatory Requirements and shall promptly notify Provider of any change required to the Approved Vendor List or sourcing as a result thereof. Provider shall, in the performance of its obligations under this Agreement, comply with all Trade and Regulatory Requirements applicable to its operations, facilities and supply chain. If Provider becomes aware of any Trade and Regulatory Requirement, restriction, sanction, embargo, prohibited-party designation or labor-sourcing prohibition that affects or is reasonably likely to affect the Materials, the Approved Vendor List, the sourcing of Products or the shipment of Products or Materials, Provider shall promptly notify Recipient and the applicable Customer in writing, and the Parties shall cooperate in good faith to identify and implement any necessary changes. Provider shall not be liable for any delay, non-performance or supply disruption to the extent arising from Trade and Regulatory Requirements, sanctions or sourcing restrictions or from any resulting change to the Approved Vendor List, and any such change shall be implemented as a Materials or engineering change under Section 4.3 and Section 7.1. Provider shall be entitled to pass through to Recipient the documented, incremental costs of compliance or mitigation arising from any such change as a True-Up under Section 3.5 or as otherwise specified in the applicable Contract Supplement, provided such change is agreed by the Recipient. This Section is in addition to, and does not limit, Section 9.2. Nothing in this Section relieves either Party of its own obligations to comply with applicable Law.
ARTICLE 5
SCHEDULE CHANGE; CANCELLATION; STORAGE
Section 5.1 Quantity Changes and Shipment Schedule Changes.
(a) With respect to any Purchase Order accepted by Provider, (i) Recipient and/or Customer may request that Provider increase the quantity of Products ordered in accordance with Contract Supplement, and (ii) either Party may request that the delivery of such Products be rescheduled to a later date, in each case solely to the extent expressly permitted by, and in accordance with, the applicable Contract Supplement and subject to Materials or manufacturing capacity availability.
(b) Unless the decreased quantity is rescheduled for delivery at a later date in accordance with Section 5.1(a), any decrease in PO order shall be deemed cancellation under Section 5.3.
Section 5.2 Discontinuance of Product. Recipient shall notify Provider in writing within two (2) Business Days after becoming aware that a Customer has issued or intends to issue an end-of-life, discontinuance or similar notice concerning a Product supplied under a Contract Supplement. The Applicable Customer Requirements concerning end-of-life purchases, discontinuance, returns, rescheduling and related procedures shall apply to the extent identified in the applicable Contract Supplement. Recipient shall remain responsible for Products within the Manufacturing Lead Time and for resulting Excess Inventory (defined below) to the extent provided in Sections 5.1 and Section 5.3 and the applicable Forecast and S&OP procedures. “Excess Inventory” shall mean either of any Product, partially completed Product, Inventory or Special Inventory, on-hand, in transit, or non-cancellable on order that is no longer required for consumption to satisfy the next 90 calendar days of demand under the most recent Forecast.
15
Section 5.3 Cancellation. Customer or Recipient may cancel any PO in accordance with the terms of the Contract Supplement. Provider and Recipient shall cooperate to assess the impact of any such cancellation. Recipient shall be responsible for communicating such impact to the applicable Customer and shall be responsible for any liability arising out of such cancellation, including where the applicable Contract Supplement does not impose any corresponding liability on the Customer. Provider shall not be responsible for any loss arising out of a cancellation of a PO by Recipient or Customer.
Section 5.4 Materials Allocation. Inventory procured by Provider specifically for Products under a Contract Supplement shall be reserved for those Products and shall not be diverted for Provider’s benefit or the benefit of another customer without Recipient’s prior written consent. In the event of a shortage or other supply constraint affecting Materials not purchased specifically for Recipient, Provider shall not independently make allocation decisions between Recipient and other customers. Allocation shall follow the applicable supplier’s allocation decision, subject to the Applicable Customer Requirements and any allocation priority expressly stated in the applicable Contract Supplement. Provider shall promptly notify Recipient of the shortage, the supplier’s allocation and the anticipated effect on production and delivery. Risk of loss and title shall pass to Recipient upon Provider’s delivery of the Products and Inventory, as applicable, to Customer. Risk of loss for Materials and Inventory shall remain with Provider from the time of receipt of Materials in Provider’s care, custody and control and shall remain with Provider until the delivery of the Product and Inventory to Recipient or Customer. For clarity, any costs resulting from unusable, damaged or defective Materials or Inventory (including, but not limited to, bonepile) caused by Provider’s acts or omissions, outside of standard attrition rate existing as of Effective Date for each Contract Supplement, shall be borne by Provider while in Provider’s care, custody and control. All freight, insurance, and other shipping expenses shall be paid by Recipient.
ARTICLE 6
DELIVERY
Section 6.1 Delivery. Provider shall deliver all Products suitably packed in accordance with the Specifications and marked for shipment to the destination specified in the applicable Purchase Order. Unless otherwise agreed between the parties all the shipment under this Agreement shall be as per INCOTERMS Ex-Works (2020), at Provider’s facility. Provider shall provide outbound logistics services and Recipient shall reimburse Provider for the documented costs. If Provider manages outbound logistics, title to and risk of loss for the Products shall transfer to Recipient when the Products are picked up at Provider’s shipping dock. If the applicable Customer manages outbound logistics, title to and risk of loss shall transfer from Provider to Recipient and then from Recipient to the Customer at pickup location at Provider’s facility. Risk of loss and title shall pass to Recipient upon Provider’s delivery of the Products and Inventory, as per the Incoterm. All freight, insurance, and other shipping expenses shall be paid by Recipient.
Section 6.2 Delivery of Recipient Materials. Recipient shall sell and deliver all Recipient Materials to Provider pursuant to the terms of this Agreement and the applicable Contract Supplement at each delivery point specified in such Contract Supplement. Shipment responsibilities in respect of the Recipient Materials shall mirror the terms and conditions and Incoterms applicable to the supplier from which such Recipient Materials were procured, and Provider shall be responsible for inbound logistics in respect of the Recipient Materials where required by such terms or the applicable Contract Supplement. Freight, insurance, duties and other shipping expenses with respect to the Recipient Materials shall be allocated in accordance with such supplier terms and Incoterms and, absent any such allocation, shall be paid by Recipient.
16
Section 6.3 Premium Freight and Process Deviations. Provider shall not incur premium-freight costs or implement a material process deviation without Recipient’s prior written approval, except to the extent necessary to address an emergency involving safety or compliance with Law. Customer requirements concerning premium freight or process deviations that are expressly identified in the applicable Contract Supplement shall apply between the Parties. The applicable Contract Supplement shall allocate responsibility for approved premium-freight costs.
Section 6.4 Warehousing, Storage and Shipment Holds. Provider shall provide warehousing, storage and shipment-hold services required by the Applicable Customer Requirements. Recipient shall reimburse Provider for documented and reasonably incurred warehousing, storage or shipment-hold services that exceed those requirements and are requested or approved by Recipient. Recipient’s right to direct a shipment hold shall mirror the applicable Customer’s shipment-hold rights identified in the Contract Supplement. Where Recipient does not take delivery of finished Products or Excess Inventory within the period specified in the applicable Contract Supplement (or, absent such specification, within thirty (30) days after notice that such Products or Inventory are available), the parties will mutually agree on applicable storage and carrying costs, and Provider may invoice Recipient for reasonable, documented storage and carrying costs incurred thereafter, and the title and risk-of-loss provisions of Section 6.1 shall continue to apply. Provider shall not be deemed a bailee, carrier, warehouse operator or customer-logistics agent for such Products or Inventory unless Provider expressly assumes that role in a written agreement that sets forth the applicable pricing, service standard and liability framework.
ARTICLE 7
SPECIFICATIONS; QUALITY CONTROL
Section 7.1 Specifications and Engineering Changes.
(a) Provider shall manufacture, assemble and test Products in accordance with the Specifications, the applicable Contract Supplement and the Applicable Customer Requirements. Provider shall meet all delivery dates, on-time-in-full requirements, forecast-adherence requirements, service levels, performance standards, Recipient-dedicated capacity commitments and other operational requirements set forth in the applicable Contract Supplement. Applicable Customer requirements concerning late delivery, service levels, KPIs and capacity allocation shall flow through to Provider to the extent expressly identified in the applicable Contract Supplement. Provider shall be responsible for any failure to satisfy those requirements, subject to the liability cap and other limitations set forth in Article 11.
(b) Provider and Recipient shall maintain and update the Specifications in accordance with the terms of this Agreement, the applicable Contract Supplement and the Applicable Customer Requirements; provided, however, that, as between the Parties, Recipient shall be solely responsible for the sufficiency and adequacy of the Specifications. Any design for manufacturability (DFM) input, technical suggestions, or process recommendations provided by Provider are for Recipient’s consideration only and shall not alter or diminish Recipient’s sole responsibility for the sufficiency, adequacy and performance of the Specifications and the resulting Product design.
17
(c) Either Recipient (or Customer) or Provider may request that Provider incorporate engineering changes into the Product or Specifications by providing the other Party with a written description of the proposed engineering change sufficient to permit the Parties to evaluate the feasibility, cost, pricing impact, implementation requirements, delivery impact and any impact on the Applicable Customer Requirements. Provider shall proceed with engineering changes only after the Parties have agreed in writing upon the changes to the Specifications, delivery schedule, pricing, fees, implementation costs and any related Contract Supplement updates.
Section 7.2 Access, Quality Audits and Governmental Inspections. Provider shall comply with the quality standards, acceptance criteria, inspection procedures, audit procedures and governmental inspection procedures set forth in the applicable Contract Supplement. Upon reasonable advance notice, Provider shall provide Recipient and its authorized representatives with reasonable access to the applicable facilities, records and personnel as reasonably necessary to verify Provider’s compliance with the Specifications, quality requirements and Applicable Customer Requirements, subject to Provider’s reasonable safety, security and confidentiality procedures. Customer audit and inspection rights expressly identified in the applicable Contract Supplement shall flow through Recipient and may be exercised by the applicable Customer through or together with Recipient. Customer-driven changes to quality or inspection requirements shall be implemented in accordance with Sections 2.3 and 7.1(c).
Section 7.3 Immovable Capital Expenditures. The cost of immovable capital equipment shall be fully depreciated over the anticipated term of the applicable Contract Supplement through the applicable pricing and shall be written down by Recipient.
Section 7.4 Sanctions-Impacted Parts and Origin Documentation. Provider shall maintain certificates of origin and other supply-chain documentation required by the Applicable Customer Requirements or applicable Law. If a Material becomes unavailable or restricted because of applicable sanctions or trade restrictions, Provider shall promptly notify Recipient and reasonably cooperate in identifying an alternative. Recipient shall be responsible for qualifying or obtaining Customer approval of replacement parts required to continue production. The Parties shall negotiate in good faith regarding any Underutilization Costs resulting from the sanctions-related restriction after Provider has used commercially reasonable efforts to mitigate those costs. Nothing in this Section limits either Party’s right to terminate for a violation of Law under Section 9.2(e).
18
ARTICLE 8
PRODUCT ACCEPTANCE; REPRESENTATIONS AND WARRANTIES; REMEDIES
Section 8.1 Product Acceptance. Provider shall comply with all Customer quality and acceptance requirements expressly identified or referred in the applicable Contract Supplement during ramp, launch, new-product introduction and mass production. Customer may reject any Product that fails to conform to the Purchase Order, the Specifications, the Applicable Customer Requirements or the express warranties set forth in Section 8.2 by providing notice during the acceptance period applicable for each Product under the applicable Customer contract (the “Acceptance Period”). Products not rejected during the Acceptance Period shall be deemed accepted, but acceptance shall not waive any warranty claim that could not reasonably have been discovered during the Acceptance Period. Customer may return nonconforming Products in accordance with the applicable Customer procedures identified in the Contract Supplement or Customer contract. Provider shall be responsible for freight and shipment costs to the extent a warranty defect is found. Recipient shall bear the risk of loss and documented return costs for any returned Product for which no warranty defect or nonconformity is found.
Section 8.2 Representations and Warranties.
(a) Recipient Warranty. To the extent permitted by the applicable Third Party Contract, Recipient shall pass through to Provider any warranties for Recipient Materials purchased from such Third Party that form part of any Product, and Provider shall comply with the applicable claim procedures and take commercially reasonable actions necessary to preserve and enforce any such warranty.
(b) General Warranty.
(i) Provider warrants that the Products shall be manufactured in accordance with the applicable Specifications and shall be free from defects in workmanship for a period as specified in the applicable Contract Supplement from the date of shipment.
(c) Performance of Warranties. In addition to the general warranty set forth in Section 8.2(a), Provider shall perform all Customer warranty obligations expressly identified as Applicable Customer Requirements in the applicable Contract Supplement; provided that Recipient shall reimburse Provider for all costs and expenses incurred by Provider in performing such Customer warranty obligations, except where there is an Epidemic Failure, for which the performance of such warranty obligations and warranty remedies (arising due to Provider’s workmanship failure) shall be at Provider’s cost.
(d) Remedies. Upon any Product’s failure to comply with this express limited warranty, Provider shall at Recipient or Customer’s option, promptly repair or replace the Product and return it to Recipient and/ or Customer. Customer may follow the requirement and process for warranty remedies in the applicable Customer contract specified or referenced in the Contract Supplements and shall return Products due to warranty failure to Provider. Recipient or Customer shall bear all risk of loss, costs, and expenses associated with Products that Recipient returns or directs a third-party to return to Provider for which there is no warranty defect found. Provider will be responsible for all risk of loss, costs and expenses associated with Products for which there is a warranty defect found.
19
(i) Exclusion of certain warranties: Notwithstanding anything to the contrary in this Agreement, the foregoing warranty does not apply to, and Provider makes no representation or warranty with respect to, any of the following: (i) Materials, equipment or services provided by vendors on the AVL; (ii) defects, failures or noncompliance resulting from or related to the Specifications or any instructions provided by or on behalf of Recipient, including design flaws, material selection errors or process instructions embedded within the Specifications, in each case where Provider manufactured the Product in accordance with such Specifications and instructions; (iii) the design of the Products; (iv) Product that has been abused, damaged, altered, misused or mishandled (including improper storage, installation or handling in accordance with any static sensitive electronic device or handling requirements) by any Person after title passes to Recipient; (v) first articles, prototypes, pre-production units, test units or other similar units; (vi) defects resulting from any defective test equipment or test software Recipient provides; (vii) the compliance of Materials (excluding Production Materials) or Products with applicable Laws; or (viii) Product (including firmware, software or hardware incorporated into the Product) that is damaged or impacted by malicious cyber activity after delivery to Recipient. Recipient shall be liable for the reasonable, documented costs and expenses Provider incurs that arise out of, or are related to, the foregoing exclusions to Provider’s express limited warranty.
(e) Recipient shall provide its own warranties directly to its Customers and other Third Parties. Recipient shall not make any other representation to a Customer or other Third Party on Provider’s behalf, and Recipient shall expressly indicate that the Customers and other Third Parties must look solely to Recipient in connection with any warranty claims, problems or other matters related to the Product.
(f) Unless the Parties have entered into a separate agreement with associated pricing for extended warranty coverage for Products, Provider’s warranty obligations for applicable Products under this Agreement and any Contract Supplement shall terminate upon termination of this applicable Contract Supplement. Upon expiration or termination of this Agreement or the applicable Contract Supplement, Recipient shall be responsible for any Customer warranty obligations relating to the applicable Products. Provider’s warranty obligations shall be subject to the limitations of liability set forth in Article 11.
(g) Notwithstanding anything to the contrary in this Agreement, Provider shall provide the warranty remedies applicable under the relevant Customer contract (as identified in the applicable Contract Supplement) for Products that are defective due to a warranty failure, even if such Products were manufactured and shipped prior to the Effective Date.
(h) Provider shall be entitled to charge back to Recipient all documented costs and expenses incurred in connection with any warranty failure under this Section 8.2 (including labor, freight and Material costs), and Recipient shall reimburse Provider for such documented costs on a monthly basis.
Section 8.3 No Representations or Other Warranties. PROVIDER MAKES NO OTHER REPRESENTATIONS OR WARRANTIES REGARDING EITHER PROVIDER’S PERFORMANCE OF SERVICES OR REGARDING THE PRODUCTS THEMSELVES, WHETHER EXPRESS, IMPLIED, STATUTORY, OR IN ANY OTHER PROVISION OF THIS AGREEMENT OR COMMUNICATION WITH RECIPIENT, AND PROVIDER SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
20
ARTICLE 9
TERM AND TERMINATION
Section 9.1 Term.
(a) Unless earlier terminated in accordance with Section 9.2, the term of this Agreement shall begin on the Effective Date and shall continue in effect until the last Contract Supplement to expire or terminate (the “Term”).
(b) Unless earlier terminated in accordance with Section 9.2 or the applicable Contract Supplement, the term of each Contract Supplement shall commence and end on the dates specified in that Contract Supplement (the “Contract Supplement Term”).
(c) Recipient may request an extension of a Contract Supplement by providing written notice to Provider before expiration of the then-current Contract Supplement Term, the required notice period shall be (i) ninety (90) days, in the case of a Contract Supplement with a Contract Supplement Term of more than two (2) quarters, (ii) thirty (30) days, in the case of a Contract Supplement with a Contract Supplement Term of more than one (1) quarter but not more than two (2) quarters, and (iii) fifteen (15) days, in the case of a Contract Supplement with a Contract Supplement Term of one (1) quarter or less, as set forth in Table A below. Any extension shall require the Parties’ mutual written consent (including, as applicable, mutual agreement on duration, pricing and changes to operational and contractual terms) and shall be subject to Tax review on a case-by-case basis. No extension or renewal shall be permitted if it would prevent, be reasonably likely to prevent or be inconsistent with the Tax-Free Status of the Transactions with respect to the Distribution, as defined in the Tax Matters Agreement.
Section 9.2 Termination.
(a) Mutual Agreement. The Parties may terminate any Contract Supplement (in whole or in part) or this Agreement (together with all Contract Supplements) at any time upon mutual written agreement of the Parties.
(b) Termination for Convenience. Upon prior written notice to Provider, Recipient may terminate one or more Contract Supplements pursuant to which Products are being provided to Recipient, for any reason or no reason. Unless a different notice period is expressly set forth in the applicable Contract Supplement, the required notice period shall be (i) ninety (90) days, in the case of a Contract Supplement with a Contract Supplement Term of more than two (2) quarters, (ii) thirty (30) days, in the case of a Contract Supplement with a Contract Supplement Term of more than one (1) quarter but not more than two (2) quarters, and (iii) fifteen (15) days, in the case of a Contract Supplement with a Contract Supplement Term of one (1) quarter or less, as set forth in Table A below. Any such termination shall be effective upon expiration of the applicable notice period unless otherwise agreed by the Parties in writing. Following any termination pursuant to this Section 9.2(b), Recipient shall remain liable for Excess Inventory in accordance with Sections 5.3 and 9.3.
21
Table A — Notice Periods for Extension and Early Termination by Recipient.
| Term |
Extension Notice Period |
Termination Notice Period | ||
| 1 Quarter or Less |
At least 15 days |
At least 15 days | ||
| >1 Quarter but < 2 Quarters |
At least 30 days |
At least 30 days | ||
| > 2 Quarters |
At least 90 days |
At least 90 days |
(c) Insolvency. Except as otherwise provided by Law, each Party may terminate this Agreement (together with all Contract Supplements) (i) with immediate effect upon written notice to the other Party, in the event that the other Party (A) makes, or seeks to make, a general assignment for the benefit of its creditors or takes any similar action, or (B) ceases its operations or is liquidated or dissolved, and (ii) upon sixty (60) days’ prior written notice to the other Party, in the event that the other Party (x) commences, or has commenced against it, proceedings under bankruptcy, insolvency or debtor’s relief or similar applicable Laws affecting the enforcement of creditors’ rights generally in any jurisdiction (other than proceedings for the purpose of effecting a financial restructuring or reorganization in which such Party continues to operate its business in the ordinary course), which proceedings are not dismissed within such sixty (60)-day period, or (y) applies for, or consents to, the appointment of a trustee, receiver or custodian for a substantial part of its property related to this Agreement, which application or consent is not rejected or revoked within such sixty (60)-day period.
(d) Material Breach. Each Party may terminate any Contract Supplement or this Agreement (together with all Contract Supplements) upon thirty (30) days’ prior written notice to the other Party in the event that such other Party materially breaches such Contract Supplement or this Agreement, as applicable, unless such breach (excluding any failure to pay undisputed amounts of money when due) is cured within such thirty (30)-day period. For avoidance doubt the notice of such material breach and cure period to remedy such breach shall be fifteen (15) days for the Contract Supplement Term less than a quarter.
(e) Violation of Law. Each Party may terminate any Contract Supplement or this Agreement (together with all Contract Supplements) with immediate effect upon written notice to the other Party if the other Party violates the Foreign Corrupt Practices Act of 1977, the U.K. Bribery Act of 2010 or any other applicable anti-bribery, anti-corruption, anti-money laundering or sanctions Laws of any jurisdiction, in each case, in connection with the performance of this Agreement.
(f) Automatic Termination. This Agreement (together with all Contract Supplements) shall terminate immediately and automatically upon any determination of a competent jurisdiction that either Party is excused or prohibited from performing in full all obligations hereunder, including, without limitation, rejection of this Agreement pursuant to 11 U.S.C. §365.
22
Section 9.3 Effect of Termination.
(a) Expiration or termination of this Agreement or any Contract Supplement shall not affect the amounts due under this Agreement or the applicable Contract Supplement by either Party that exist as of the date of expiration or termination, including obligations in Article 5 with respect to payment by and shipment to Recipient of all Excess Inventory in existence as of such date.
(b) Upon expiration or termination of this Agreement or a Contract Supplement, Provider shall, at Recipient’s request, convert work-in-progress into finished Products and invoice Recipient for those Products in accordance with this Agreement. Within thirty (30) days after the applicable expiration or termination date, Recipient shall purchase and move all finished Products, work-in-progress, Materials and other Inventory for which Recipient is responsible. Recipient shall timely remove its equipment and any Customer-owned or consigned equipment from Provider’s facilities. Recipient shall purchase from Provider, at fair book value, as agreed between the Parties as of the expiration or termination date, all Provider-owned equipment mutually identified by the Parties in good faith as dedicated to the applicable Products. Recipient also shall satisfy all open Purchase Orders and other exit liabilities allocated to and agreed with Recipient. The Parties shall cooperate in good faith to implement the transition, storage, warehousing, site-restoration and equipment-transfer arrangements as reasonably required. If Recipient does not remove such Inventory within the thirty (30) day period, Provider may charge Recipient agreed reasonable storage and carrying costs, and a physical disposition procedure shall be arranged between the Parties as mutually agreed.
Section 9.4 Survival. Subject to the limitations and other provisions of this Agreement, the rights and obligations of the Parties set forth in Sections 3.4, 3.6, 4.4, 5.4 and 9.3 and Articles 8, 10, 11, 12, 13 and 16, and any terms or provisions that by their nature survive or are necessary to interpret or enforce such provisions, shall survive any termination or expiration of this Agreement or any Contract Supplement.
Section 9.5 Program Assets (Unique and Immovable) Early Termination Costs. If Recipient terminates any Contract Supplement or this Agreement for convenience or otherwise prior to the end of the applicable Contract Supplement Term, Recipient shall bear one hundred percent (100%) of the remaining unabsorbed or un-depreciated value of the program assets and any other tooling, equipment or assets acquired by Provider and are unique and immovable, to the extent not otherwise recovered through the price. Provider shall be entitled to recover such amounts, by a final invoice, issued upon such termination, for the remaining net book value of such assets, in each case net of any amount Provider actually recovers through commercially reasonable redeployment of such assets.
23
ARTICLE 10
INDEMNIFICATION
Section 10.1 Provider’s Indemnification to Recipient. Each Party, as the Provider shall indemnify, defend and hold harmless the other Party, as the Recipient, and the Recipient’s Affiliates and its and their respective employees, officers, agents and representatives (collectively, the “Recipient Indemnified Parties”) from and against all Liabilities incurred by a Recipient Indemnified Party to the extent arising out of, relating to or resulting from a Third Party claim concerning:
(a) any actual or alleged injury to or death of any Person or damage to property caused by a Product, to the extent caused by Provider’s breach of an express warranty under Article 8; or
(b) any actual or alleged infringement or misappropriation of a Third Party’s Intellectual Property, to the extent caused by a manufacturing process or Production Materials selected by Provider, except to the extent the claim would not have arisen but for Provider’s compliance with the Specifications or other written instructions supplied by Recipient.
(c) The indemnification obligations under this Section 10.1 shall survive the expiration or termination of this Agreement.
Section 10.2 Recipient’s Indemnification to Provider. Recipient shall pass through to Provider the benefit of any indemnity given by the applicable Customer to Recipient in respect of the Products to the extent permitted by the applicable Customer agreement. The foregoing pass-through indemnity from Recipient to Provider shall apply, except to the extent the underlying claim was caused by Provider’s gross negligence, willful misconduct or fraud, in each case except to the extent Provider is obligated to indemnify the Recipient Indemnified Parties in respect of such Liabilities under Section 10.1. The indemnification obligations under this Section 10.2 shall survive expiration or termination of this Agreement.
Section 10.3 Mutual Indemnification. Each Party (the “Indemnifying Party”) shall indemnify, defend and hold harmless the other Party and its Affiliates and its and their respective employees, officers, agents and representatives from and against all Liabilities to the extent arising out of, relating to or resulting from a Third Party claim concerning the Indemnifying Party’s breach of or non-compliance with applicable Laws, including trade sanctions, export controls, import restrictions, customs regulations, anti-boycott laws, anti-bribery and anti-corruption laws, anti-money laundering laws, forced-labor and restricted-labor sourcing prohibitions, manufacturing safety and environmental laws, and product safety and regulatory compliance requirements, in each case to the extent such breach or non-compliance is attributable to the acts or omissions of the Indemnifying Party or its Affiliates, subcontractors or agents. This mutual indemnity is without prejudice to the specific indemnification obligations set forth in Sections 10.1 and 10.2. The indemnification obligations under this Section shall survive expiration or termination of this Agreement.
Section 10.4 Procedures for Indemnification. The indemnification procedures set forth in Section 6.4 and Section 6.5 of the Separation Agreement shall apply to the matters indemnified hereunder, mutatis mutandis; provided that the procedures related to indemnification of Tax matters shall be exclusively governed by the Tax Matters Agreement.
24
ARTICLE 11
LIMITATIONS OF LIABILITY; INSURANCE
Section 11.1 Limitation on Liability. NOTWITHSTANDING ANYTHING TO THE CONTRARY IN THIS AGREEMENT, TO THE FULLEST EXTENT PERMITTED UNDER APPLICABLE LAW, EXCEPT WITH RESPECT TO A PARTY’S (A) INDEMNIFICATION OBLIGATIONS AND (B) BREACH OF CONFIDENTIALITY OBLIGATIONS, IN NO EVENT SHALL EITHER PARTY OR ANY OF ITS AFFILIATES BE LIABLE, WHETHER IN CONTRACT, TORT, INCLUDING NEGLIGENCE AND STRICT LIABILITY, OR OTHERWISE, AT LAW OR IN EQUITY, TO THE OTHER PARTY OR ITS AFFILIATES FOR ANY PUNITIVE, EXEMPLARY, SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL LOSSES ARISING FROM OR RELATING TO ANY CLAIM MADE UNDER THIS AGREEMENT, EVEN IF SUCH PERSON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES.
Section 11.2 Liability Cap. EXCEPT WITH RESPECT TO A PARTY’S (A) INDEMNIFICATION OBLIGATIONS, (B) BREACH OF CONFIDENTIALITY OBLIGATIONS, (C) PAYMENT OBLIGATIONS, (D) FRAUD, WILLFUL MISCONDUCT OR GROSS NEGLIGENCE, (E) PROVIDER’S OBLIGATION FOR EPIDEMIC FAILURE, AND (F) ANY OTHER EXCEPTION EXPRESSLY STATED IN THE APPLICABLE CONTRACT SUPPLEMENT, EACH PARTY’S AGGREGATE LIABILITY TO the OTHER PARTY (INCLUDING AFFILIATES) ARISING OUT OF OR RELATING TO THIS AGREEMENT, A CONTRACT SUPPLEMENT, THE SERVICES PROVIDED THEREUNDER OR ANY PRODUCT SUPPLIED THEREUNDER SHALL NOT EXCEED THE AGGREGATE CONTRIBUTION TO OPERATING PROFIT ACTUALLY RECEIVED BY PROVIDER UNDER THAT SPECIFIC CONTRACT SUPPLEMENT DURING THE PERIOD TO WHICH THE APPLICABLE CLAIM RELATES; LIABILITY UNDER AN APPLICABLE CUSTOMER REQUIREMENT SHALL FLOW THROUGH TO PROVIDER ONLY UP TO THE FOREGOING CAP AND RECIPIENT SHALL BEAR ANY EXCESS LIABILITY. FOR PURPOSES OF THIS SECTION, “AGGREGATE CONTRIBUTION TO OPERATING PROFIT” MEANS THE AGGREGATE AMOUNT EXPRESSLY RECEIVED BY PROVIDER AS MARKUP UNDER THE APPLICABLE CONTRACT SUPPLEMENT, EXCLUDING TOTAL MATERIAL COST, TOTAL NET MANUFACTURING COST, TAXES, FREIGHT, INSURANCE, DUTIES AND OTHER PASS-THROUGH AMOUNTS.
Section 11.3 Insurance. During the Term and for any additional period required by the applicable Contract Supplement, each Party shall maintain insurance policies and coverage limits that are commercially reasonable and appropriate for the risks allocated to that Party under this Agreement. Upon reasonable request, a Party shall provide the other Party with certificates of insurance evidencing such coverage. The maintenance of insurance shall not limit a Party’s liability or obligations under this Agreement.
25
ARTICLE 12
CONFIDENTIALITY
Section 12.1 Confidential Information. As used herein, “Confidential Information” means any confidential and proprietary information of a Party, regardless of form, which such Party considers to be confidential and proprietary, including information that: (a) if disclosed in writing, is labeled as “confidential” or “proprietary”; (b) if disclosed orally, is designated confidential at disclosure; (c) by nature or the circumstances of its disclosure, should reasonably be considered as confidential; or (d) constitutes information or data related to the Products, including Know-How, trade secrets, algorithms, source code, product/service specifications, prototypes, product roadmaps, Software, product pricing, marketing plans, financial data, personnel statistics, methods of manufacturing and processing, techniques, research, development, inventions (whether or not patentable and whether or not reduced to practice), data, ideas, concepts, drawings, designs and schematics. Notwithstanding the foregoing, the term “Confidential Information” shall not include information which: (i) rightfully becomes publicly available other than by a breach of a duty to the Disclosing Party or violation of Law; (ii) is rightfully received by the Receiving Party from a Third Party without any obligation of confidentiality; (iii) as evidenced by the Receiving Party’s written records, is rightfully known to the Receiving Party without any limitations on use or disclosure prior to its receipt from the Disclosing Party; or (iv) is independently developed by or on behalf of the Receiving Party without use of or reference to the Confidential Information of the Disclosing Party.
Section 12.2 Confidentiality Obligations. Each Party and its Affiliates that receives, obtains or otherwise becomes aware of any Confidential Information of the other Party or its Affiliates under or in connection with this Agreement (the “Receiving Party”) agrees with respect to the Confidential Information of the other Party or its Affiliates (the “Disclosing Party”) to (a) keep the Disclosing Party’s Confidential Information confidential, (b) use the Disclosing Party’s Confidential Information only as necessary to perform its obligations or exercise its rights under this Agreement or otherwise in connection with a Dispute, (c) protect the Disclosing Party’s Confidential Information using at least the same degree of care that it uses to protect its own confidential information of a similar nature, but in no event less than a reasonable degree of care, and (d) limit access to the Disclosing Party’s Confidential Information to its personnel, Affiliates, assignees, contractors, subcontractors, sublicensees, authorized representatives and advisors, (including financial, tax, legal and technical advisors), in each case, who have a need to access or know such Confidential Information for the purpose of performing its obligations or exercising its rights under this Agreement and who are bound by confidentiality obligations or professional duties of confidentiality that are at least as protective of the Confidential Information as the obligations set forth in this Agreement. The Receiving Party shall be responsible for any breach of this Article 12 by any Person to whom it discloses the Disclosing Party’s Confidential Information, except to the extent such Person is separately bound by confidentiality obligations directly to the Disclosing Party. Except as otherwise expressly provided in this Agreement, nothing in this Agreement is intended to grant to the Receiving Party any rights in or to any Confidential Information of the Disclosing Party.
Section 12.3 Disclosure Required by Law. In the event that the Receiving Party is requested or required by Law (including subpoena or court order) to disclose any Confidential Information of the Disclosing Party, the Receiving Party shall, to the extent legally permissible, provide prompt written notice to the Disclosing Party of such request or requirement, so that the Disclosing Party will have a reasonable opportunity to seek confidential treatment of such Confidential Information prior to its disclosure (whether through protective orders or otherwise) and, upon request, the Receiving Party shall reasonably cooperate with the Disclosing Party in seeking confidential treatment of such Confidential Information or other appropriate relief from such Law. If, in the absence of a protective order, other confidential treatment or waiver under this Agreement, the Receiving Party is advised by its legal counsel that it is legally required to disclose such Confidential Information, the Receiving Party may disclose such Confidential Information without liability under this Article 12; provided that the Receiving Party exercises commercially reasonable efforts to obtain reliable assurances that confidential treatment will be afforded to any such Confidential Information prior to its disclosure and discloses only the minimum amount of such Confidential Information necessary to comply with such Law. Similarly, with respect to any disclosure of Confidential Information in connection with a Dispute, the Receiving Party shall exercise commercially reasonable efforts to obtain reliable assurances that confidential treatment will be afforded to any Confidential Information of the Disclosing Party prior to its disclosure.
26
Section 12.4 Disclosure in Connection with Due Diligence. The terms of each Exhibit (including the Contract Supplements) to this Agreement shall be the Confidential Information of both Parties. A Party may provide any Exhibit (including any Contract Supplement) to this Agreement to any Third Party, subject to confidentiality obligations no less restrictive than those set forth in this Article 12, if required to do so in connection with any diligence for any actual or potential bona fide business transaction with such Third Party related to the subject matter of this Agreement (including an acquisition, divestiture, merger, consolidation, asset sale, financing or public offering).
ARTICLE 13
INTELLECTUAL PROPERTY
Section 13.1 Intellectual Property Ownership.
(a) Subject to Section 13.2, each Party shall retain all right, title and interest in and to any and all Intellectual Property that is (a) owned by such Party or any of its Affiliates as of the Effective Date, or (b) developed or acquired by or on behalf of such Party or any of its Affiliates independently from the activities conducted under this Agreement (“Background IP”). Nothing in this Agreement or any Contract Supplement shall be construed as transferring ownership of any Background IP from one Party to the other.
(b) Except as otherwise expressly provided in this Agreement or any other Ancillary Agreement, as between the Parties, (i) Recipient shall own all right, title and interest in and to any modification, improvement, enhancement or development made during the Term that is specifically related to a Product, the Recipient Materials or the Specifications and that is separable from Provider Background IP and Provider’s generally applicable manufacturing techniques, processes, know-how and Intellectual Property (each, a “Product Improvement”), and (ii) Provider shall own all right, title and interest in and to any modification, improvement, enhancement or development with respect to Provider Background IP or any generally applicable manufacturing technique, process, know-how or Intellectual Property that is not specifically related to a Product, the Recipient Materials or the Specifications. Provider shall promptly disclose each Product Improvement to Recipient.
Section 13.2 Grant of License. Subject to the terms and conditions of this Agreement, Recipient, on behalf of itself and its Affiliates, hereby grants to Provider and the members of such Provider’s Group, a non-exclusive, nontransferable (except pursuant to a permitted assignment of this Agreement), sublicensable, worldwide, royalty-free license, during the term of this Agreement, in, to and under any Intellectual Property owned or controlled by Recipient and its Affiliates that is reasonably necessary for Provider’s performance of its obligations hereunder, such license solely to the extent reasonably necessary for, and solely for the purposes of, the manufacture, distribution and sale to Recipient of the Products hereunder (including as required to produce, formulate or otherwise process Recipient Material in connection therewith). Except as set forth in this Section 13.2 or as may be contained in a separate license agreement, this Agreement and the sale of Product hereunder does not convey a license (express or implied) under, or any other right, title or interest in or to, any Intellectual Property.
27
ARTICLE 14
FORCE MAJEURE
Section 14.1 Force Majeure. In case performance of any terms or provisions hereof shall be delayed or prevented, in whole or in part, because of or related to any requirement of any Law or national securities exchange, or because of an event beyond the reasonable control of such Party (or any Person acting on its behalf) that could not reasonably have been avoided or overcome through commercially reasonable measures, and includes acts of God, storms, floods, riots, pandemics, fires, sabotage, civil commotion or civil unrest, interference by civil or military authorities, acts of war (declared or undeclared) or armed hostilities or other national or international calamity or one or more acts of terrorism, failure of energy sources or distribution facilities, destruction of production facilities, Materials unavailability or equipment or tooling failure, in each case only if caused by an otherwise qualifying event and not by the affected Party’s failure to maintain appropriate sourcing, safety stock, maintenance, repair or business-continuity measures required under this Agreement (each, a “Force Majeure Event”), then, upon prompt written notice stating the date and extent of such interference and the cause thereof by such Party to the other Party, such Party shall be excused from its obligations hereunder during the period such Force Majeure Event or its effects continue, and no liability shall attach against either Party on account thereof; provided, however, that the Party whose performance is interfered with promptly resumes the required performance upon the cessation of the Force Majeure Event or its effects. No Party shall be excused from performance if such Party fails to use commercially reasonable efforts to remedy the situation and remove the cause and effects of the Force Majeure Event. Notwithstanding the temporary excuse to perform to the extent prohibited by a Force Majeure Event, if a Party is not able to perform within (i) sixty (60) days, in the case of a Contract Supplement with a Contract Supplement Term of more than two (2) quarters, (ii) thirty (30) days, in the case of a Contract Supplement with a Contract Supplement Term of more than one (1) quarter but not more than two (2) quarters, and (iii) fifteen (15) days, in the case of a Contract Supplement with a Contract Supplement Term of one (1) quarter or less after the commencement of the Force Majeure Event, the other Party may terminate the affected Contract Supplement in accordance with Section 9.2(d). If the Force Majeure Event affects all Contract Supplements then in effect, the other Party may terminate this Agreement and all Contract Supplements in accordance with Section 9.2(d).
ARTICLE 15
MANAGEMENT AND DISPUTE RESOLUTION
Section 15.1 Quarterly Business Review. At the end of each quarter during the term of this Agreement, the Parties shall meet (in person or by audio or video conference) to discuss general business matters relating to this Agreement and the provision of Products hereunder (“Quarterly Business Review”). Such Quarterly Business Reviews shall include, without limitation, discussion of true-ups, planning, inventory mapping, Change Orders, invoices and any other matters requiring coordination, review or resolution under this Agreement. For the Contract Supplements with a Contract Supplement Term of two (2) quarters or less, the Parties shall conduct this review on a monthly basis.
28
Section 15.2 Dispute Resolution. The dispute resolution procedures set forth in Article VIII of the Separation Agreement shall apply and are hereby incorporated herein by reference, mutatis mutandis; provided that prior to submitting a General Dispute Notice pursuant to Section 8.1(c)(ii) of the Separation Agreement, the Parties shall first comply with the procedures set forth in this Section 15.2.
(a) The Parties shall seek to resolve any Dispute at the site or working level, with the involvement of Party employees involved in the day-to-day operation at issue in the Dispute, including local leadership for both Parties. If these efforts do not result in a resolution of the Dispute ten (10) days after initiation of this process, or such longer period as the Parties may mutually agree in writing, then the Dispute shall be referred to the general manager of the applicable manufacturing site and the business unit president responsible for the applicable Product for each Party or, in each case, an employee of similar authority if those titles change. Such representatives will meet (in person or by audio or video conference) during the next ten (10) days and shall confer in a good faith effort to resolve the Dispute. If such representatives are unable to resolve the Dispute within such ten (10) day period, then either Party may deliver a General Dispute Notice pursuant to Section 8.1(c)(ii) of the Separation Agreement and the terms and conditions of Article VIII of the Separation Agreement shall apply.
Section 15.3 Data Sharing and Visibility. Upon Recipient’s reasonable request, Provider shall provide Recipient with open-book visibility into the costs and operations relating to the Products and the Services, including real-time visibility into sales, inventory and operations planning data, visibility into PPV and manufacturing costs, visibility into Inventory quantities, aging and location and operational visibility mirroring the terms of the applicable Customer agreement expressly identified in the applicable Contract Supplement. Provider shall also provide the local records and documentation identified in the applicable Contract Supplement, including certificates of origin. Any disclosure under this Section 15.3 shall constitute Confidential Information of Provider and shall be subject to Article 12.
ARTICLE 16
MISCELLANEOUS
Section 16.1 Relationship of the Parties. Nothing in this Agreement shall be deemed or construed by the Parties or any Third Party as creating a relationship of principal and agent, partnership or joint venture between the Parties, between Provider and Recipient or with any individual providing Products, it being understood and agreed that no provision contained herein, and no act of any Party or members of their respective Groups, shall be deemed to create any relationship between the Parties or members of their respective Groups other than the relationship set forth herein. Each Party shall act under this Agreement solely as an independent contractor and not as an agent or employee of the other Party or any of such Party’s Affiliates.
29
Section 16.2 Complete Agreement; Construction. This Agreement, including the Exhibits (including the Contract Supplements) hereto, shall constitute the entire agreement between the Parties with respect to the subject matter hereof and shall supersede all previous negotiations, commitments, course of dealings and writings with respect to such subject matter. In the event of any inconsistency between this Agreement and any Contract Supplements, Section 2.2 shall govern. In the event of any inconsistency between this Agreement and any Exhibit hereto (excluding the Contract Supplements), this Agreement shall prevail. In the event and to the extent that there shall be a conflict between the provisions of this Agreement and the provisions of the Separation Agreement, the provisions of this Agreement shall control with respect to the subject matter hereof.
Section 16.3 Counterparts. This Agreement may be executed and delivered (including by facsimile or other means of electronic transmission, such as by electronic mail in “pdf” form) in more than one counterpart, all of which shall be considered one and the same agreement, each of which when executed shall be deemed to be an original, and shall become effective when one or more such counterparts have been signed by each of the Parties and delivered to each of the Parties.
Section 16.4 Notices. Notices, requests, instructions or other documents to be given under this Agreement shall be in writing and shall be deemed to have been properly delivered, given and received, (a) on the date of transmission if sent via email (provided, however, that notice given by email shall not be effective unless either (i) a duplicate copy of such email notice is promptly given by one of the other methods described in this Section 16.4 or (ii) the receiving party delivers a written confirmation of receipt of such notice either by email or any other method described in this Section 16.4 (excluding “out of office” or other automated replies)), (b) when delivered, if delivered personally to the intended recipient, and (c) one (1) Business Day later, if sent by overnight delivery via a national courier service (providing proof of delivery), and in each case, addressed to a Party at the address for such Party set forth on a schedule to be delivered by each Party to the address set forth below (or at such other address for a Party as shall be specified in a notice given in accordance with this Section 16.4):
To RemainCo:
Flex Ltd.
12515-8 Research Blvd, Suite 300,
Austin, Texas 78759
| Attention: | [], [] |
| Email: | legalnotices@flex.com |
with a copy (which shall not constitute notice) to:
Skadden, Arps, Slate, Meagher & Flom LLP
525 University Ave.
Palo Alto, CA 94301
| Attention: | Amr Razzak, Esq. |
| Email: | amr.razzak@skadden.com |
30
To SpinCo:
Axiom Solutions International, Inc.
Domain Tower II, 19th Floor, 10025 Alterra Parkway
Austin, TX 78758
| Attention: | [], [] |
| Email: | [] |
with a copy (which shall not constitute notice) to:
Skadden, Arps, Slate, Meagher & Flom LLP
525 University Ave.
Palo Alto, CA 94301
| Attention: | Amr Razzak, Esq. |
| Email: | amr.razzak@skadden.com |
Section 16.5 Waivers. Any provision of this Agreement may be waived, if and only if, such waiver is in writing and signed by the Party against whom the waiver is to be effective. Notwithstanding the foregoing, no failure to exercise and no delay in exercising, on the part of any Party, any right, remedy, power or privilege hereunder shall operate as a waiver hereof; nor shall any single or partial exercise of any right, remedy, power or privilege hereunder preclude any other or further exercise thereof or the exercise of any other right, remedy, power or privilege. Any consent required or permitted to be given by any Party to the other Party under this Agreement shall be in writing and signed by the Party giving such consent and shall be effective only against such Party (and the members of its Group).
Section 16.6 Amendments. This Agreement may not be modified or amended except by an agreement in writing specifically designated as an amendment hereto signed by each of the Parties.
Section 16.7 Assignment. Neither this Agreement nor any of the rights, interests or obligations under this Agreement shall be assigned or transferred, in whole or in part, by operation of Law or otherwise by either of the Parties without the prior written consent of the other Party (which consent may be granted or withheld in such other Party’s sole discretion); provided that such first Party may assign or transfer, in whole or in part, by operation of Law or otherwise, without the prior written consent of the other Party, this Agreement or any of the rights, interests or obligations under this Agreement to (a) one or more of its Affiliates and (b) the successor (if Customer contracts permits) to all or a portion of the business or assets to which this Agreement relates; provided, further, that (i) the assigning or transferring Party shall promptly notify the non-assigning or non-transferring Party in writing of any assignments or transfers it makes under the foregoing clause (b) and (ii) in either case of the foregoing clauses (a) or (b), the Person to whom this Agreement is assigned or transferred shall agree in writing to be bound by the terms of this Agreement as if named as a “Party” hereto with respect to all or such portion of this Agreement so assigned or transferred. Any purported assignment in violation of this Section 16.7 shall be void ab initio. No assignment or transfer shall relieve the assigning or transferring Party of any of its obligations under this Agreement that accrued prior to such assignment or transfer unless agreed to by the non-assigning or non-transferring Party.
31
Section 16.8 Successors and Assigns. The provisions of this Agreement and the obligations and rights hereunder shall be binding upon, inure to the benefit of and be enforceable by (and against) the Parties and their respective successors and permitted transferees and assigns.
Section 16.9 No Circumvention. The Parties agree not to directly or indirectly take any actions, act in concert with any Person who takes an action or cause or allow any member of any such Party’s Group to take any actions (including the failure to take a reasonable action) such that the resulting effect is to materially undermine the effectiveness of any of the provisions of this Agreement (including adversely affecting the rights or ability of any Party to successfully pursue indemnification or payment pursuant to this Agreement).
Section 16.10 Subsidiaries. Each of the Parties shall cause to be performed, and hereby guarantees the performance of, all actions, agreements and obligations set forth herein to be performed by any Subsidiary of such Party or by any entity that becomes a Subsidiary of such Party at and after the Effective Date.
Section 16.11 Third Party Beneficiaries. Except with respect to indemnification obligations hereunder, this Agreement is solely for the benefit of, and is only enforceable by, the Parties and their permitted successors and assigns and should not be deemed to confer upon third parties any remedy, benefit, claim, liability, reimbursement, claim of Action or other right of any nature whatsoever, including any rights of employment for any specified period, in excess of those existing without reference to this Agreement.
Section 16.12 Title and Headings. Titles and headings to sections herein are inserted for the convenience of reference only and are not intended to be a part of or to affect the meaning or interpretation of this Agreement.
Section 16.13 Governing Law. This Agreement, including all matters of construction, validity, interpretation, performance and enforceability, and any dispute arising directly or indirectly out of, in connection with or relating to this Agreement shall be governed by and construed in accordance with the Laws of the State of Delaware, without giving effect to the conflicts of laws principles thereof.
Section 16.14 Specific Performance. The Parties acknowledge and agree that irreparable harm would occur in the event that the Parties do not perform any provision of this Agreement in accordance with its specific terms or otherwise breach this Agreement and the remedies at law for any breach or threatened breach of this Agreement, including monetary damages, are inadequate compensation for any Indemnifiable Loss. Accordingly, from and after the Effective Date, in the event of any actual or threatened default in, or breach of, any of the terms, conditions and provisions of this Agreement, the Parties agree that the Party or Parties to this Agreement who are or are to be thereby aggrieved shall, subject and pursuant to the terms of this Article 16 (including after compliance with all notice and negotiation provisions), have the right to specific performance and injunctive or other equitable relief of its or their rights under this Agreement, in addition to any and all other rights and remedies at law or in equity, and all such rights and remedies shall be cumulative. The Parties agree that any defense in any action for specific performance that a remedy at law would be adequate is hereby waived, and that any requirements for the securing or posting of any bond with such remedy are hereby waived.
32
Section 16.15 Severability. If any term, provision, covenant or restriction of this Agreement is held by a court of competent jurisdiction or other authority to be invalid, illegal, void or unenforceable, the remainder of the terms, provisions, covenants and restrictions of this Agreement shall remain in full force and effect and shall in no way be affected, impaired or invalidated so long as the economic or legal substance of the transactions contemplated hereby is not affected in any manner materially adverse to any Party. Upon a determination that any term, provision, covenant or restriction is invalid, illegal, void or unenforceable, the Parties shall negotiate in good faith to modify to the fullest extent permitted by applicable Law this Agreement so as to effect the original intent of the Parties as closely as possible in a mutually acceptable manner in order that the transactions contemplated hereby be consummated as originally contemplated to the fullest extent possible.
Section 16.16 No Duplication; No Double Recovery. Nothing in this Agreement is intended to confer to or impose upon any Party a duplicative right, entitlement, obligation or recovery with respect to any matter arising out of the same facts and circumstances.
* * * * *
[SIGNATURE PAGES FOLLOW]
33
IN WITNESS WHEREOF, the Parties have executed this Agreement as of the date first written above.
| RemainCo | ||||
| [FLEX LTD.] | ||||
| Signature: |
| |||
| Name: |
[] | |||
| Title: |
[] | |||
[Signature Page to Product Manufacturing and Supply Agreement]
IN WITNESS WHEREOF, the Parties have executed this Agreement as of the date first written above.
| SpinCo | ||||
| [AXIOM SOLUTIONS INTERNATIONAL, INC.] | ||||
| Signature: |
| |||
| Name: |
[] | |||
| Title: |
[] | |||
[Signature Page to Product Manufacturing and Supply Agreement]
EXHIBIT A
CONTRACT SUPPLEMENTS
[See attached.]
Exhibit A-1