EXHIBIT 13.1
THE COMPANY’S ANNUAL
REPORT TO SHAREHOLDERS FOR
THE FISCAL YEAR ENDED March 31, 2025
2025
ANNUAL REPORT
| FINANCIAL HIGHLIGHTS |
| (In thousands, except per share data)
|
| Fiscal 2025 |
Fiscal 2024 |
|||||||
| Net sales |
$ | 444,600 | $ | 516,251 | ||||
| Net earnings |
$ | 6,085 | $ | 17,345 | ||||
| Net earnings per share (Basic) |
$ | 0.87 | $ | 2.39 | ||||
| Cash dividends per share |
$ | 0.16 | $ | 0.10 | ||||
| Stockholders’ equity |
$ | 132,425 | $ | 127,475 | ||||
| Working capital |
$ | 128,143 | $ | 115,957 | ||||
TO OUR SHAREHOLDERS:
We are pleased to report $6.1 million of net earnings for fiscal 2025 in a year that presented challenging steel price trends combined with complex economic and political factors. This year highlights the benefit of our hedging capabilities as we successfully overcame price volatility to expand profitable results. We remained in a strong financial position at year-end and able to capitalize on both short-term and long-term growth opportunities.
Our sales volume of Company owned inventory for the year was steady compared to the prior year at approximately 500,000 tons. We are pleased with our volume stability given the adverse impact of downtime for equipment upgrades, challenging conditions for some of our customers and political uncertainty leading up to the presidential election. We are also happy to report that our newest facility in Sinton, Texas reached full capacity during the year and contributed the highest profit margin among all our facilities.
Fiscal 2025 was a challenging year for margins due to the trend of hot-rolled coil (“HRC”) prices. The year started with HRC prices on a downward trend that continued until August. Prices remained stable at the bottom of the price cycle until February with prices then increasing through the end of the fiscal year. As a result, our first three quarters experienced challenging physical margins offset by hedging gains and we ended with a strong fourth quarter supported by improved physical margins.
We moved our stock exchange listing to Nasdaq’s highest listing tier, the Nasdaq Global Select Market, shortly after fiscal year-end. As we grow, we need to increase our market visibility and attract more investor capital. We believe listing on Nasdaq aligns with our goal of building Friedman’s long-term equity value by providing more potential for improved trading liquidity, as well as increased institutional ownership and capital inflows.
I continue to see value in Friedman today along with significant opportunities for growth in the future. Thank you for your support and investment in our Company.
You are invited to attend the Annual Meeting of Shareholders scheduled to start at 9:00 a.m. (Central Time) on Thursday, September 18, 2025, in the offices of Norton Rose Fulbright US LLP, 1550 Lamar, Suite 2000, Houston, Texas 77010.
Sincerely,
Michael J. Taylor
President and Chief Executive Officer
Chairman of the Board of Directors
OFFICERS
Michael J. Taylor
President and Chief Executive Officer
Jonathan Holcomb
Vice President of Sales — Flat Roll Divisions and Vice President of Purchasing
Alex LaRue
Chief Financial Officer — Secretary and Treasurer
Paul Rottmann
Vice President of Operations — Flat Roll Divisions
Steve Teeter
Vice President of Operations — Southeast Flat Roll Divisions
Michael Thompson
Vice President and General Manager — Tubular Division
COMPANY OFFICES AND WEBSITES
CORPORATE OFFICE & FLAT ROLL PRODUCTS SALES OFFICE
1121 Judson Road, Suite 124
Longview, Texas 75601
903-758-3431
TUBULAR PRODUCTS SALES OFFICE
3681 FM 250
Lone Star, Texas 75668
903-639-2511
WEBSITES*
www.friedmanindustries.com
www.texastubular.com
COUNSEL
Norton Rose Fulbright US LLP
1550 Lamar, Suite 2000
Houston, Texas 77010
AUDITORS
Moss Adams LLP
500 Dallas Street, Suite 1900
Houston, TX 77002
TRANSFER AGENT AND REGISTRAR
Equiniti Trust Company LLC
48 Wall Street, 23rd Floor
New York, NY 10043
* Information on our websites is expressly not incorporated by reference into this document.
DIRECTORS
Durga D. Agrawal
President, Piping Technology & Products, Inc. (pipe fabrication)
Houston, Texas
Michael Hanson
Retired, formerly, Vice President of Sales and Marketing for North Star BlueScope Steel LLC (steel mill)
Ottawa Hills, Ohio
Max Reichenthal
President, Texas Iron and Metal (steel product sales)
Houston, Texas
Sandy Scott
Retired, formerly, Chief Executive Officer of Sprint Industrial Holdings (rental equipment and transportation company), currently serving on the boards of directors of Terra Nova Solutions, Rowland Inc., CEDA International, DWD International, LLC and Goodwill of Houston
Houston, Texas
Tim Stevenson
Chief Executive Officer and Founder, Metal Edge Partners (metals price risk management and strategic advisory services)
Plymouth, Minnesota
Michael J. Taylor, Chairman of the Board
President and Chief Executive Officer of the Company
Houston, Texas
Sharon Taylor
Executive Vice President and Chief Financial Officer, Martin Midstream Partners L.P. and Martin Resource Management Corporation (terminalling, processing, transportation, storage and packaging services for petroleum products and by-products)
Kilgore, Texas
Joe L. Williams
Partner, Pozmantier, Williams and Stone Insurance Consultants, LLC (insurance and risk management consultants)
Houston, Texas
ANNUAL REPORT ON FORM 10-K
Shareholders may obtain without charge a copy of the Company’s Annual Report on Form 10-K for the year ended March 31, 2025, as filed with the U.S. Securities and Exchange Commission. Written requests should be addressed to: Alex LaRue, Chief Financial Officer — Secretary and Treasurer, Friedman Industries, Incorporated, P.O. Box 2192, Longview, Texas 75606.
DESCRIPTION OF BUSINESS
Friedman Industries, Incorporated (the “Company”) is a manufacturer and processor of steel products and operates in two product segments: flat-roll products and tubular products.
Flat-Roll Products
The flat-roll product segment consists of the operation of five hot-rolled coil processing facilities located in Hickman, Arkansas; Decatur, Alabama; East Chicago, Indiana; Granite City, Illinois and Sinton, Texas. The Hickman, Granite City and East Chicago facilities operate temper mills and cut-to-length lines. The Decatur and Sinton facilities operate stretcher leveler cut-to-length lines. The equipment at all locations improve the flatness and surface quality of the coils and cut the coils into sheet and plate of prescribed lengths. On a combined basis, the facilities are capable of cutting sheet and plate with thicknesses ranging from 16 gauge to 1” thick in widths ranging from 36” wide to 96” wide. The vast majority of flat-roll product segment revenue is generated from sales of Company owned inventory but the segment also generates revenue from the processing or storage of customer owned coils on a fee basis.
The processing facilities are substantially similar with respect to products produced. The Company makes shipments of flat-roll products based on which facility offers the desired product or, if the product is available at multiple facilities, based on other factors, such as customer location, freight conditions and the ability of the facility to fulfill the order on a timely basis. Flat-roll products are sold on a wholesale, rapid-delivery basis in competition with other processors of hot-rolled steel coils. Shipments are made via unaffiliated truckers or by rail.
The flat-roll segment purchases its inventory from a limited number of suppliers. Loss of any of these suppliers could have a material adverse effect on the Company’s business.
The Company sells flat-roll products and processing services to approximately 442 customers located primarily in the midwestern, southwestern and southeastern regions of the United States. The Company’s principal customers for these products and services are steel distributors and customers manufacturing steel products such as steel buildings, railroad cars, barges, tanks and containers, trailers, component parts and other fabricated steel products.
Tubular Products
The tubular product segment consists of the Company’s Texas Tubular Products division (“TTP”) located in Lone Star, Texas. TTP operates two electric resistance welded pipe mills with a combined outside diameter (“OD”) size range of 2 3/8” OD to 8 5/8” OD. Both pipe mills are American Petroleum Institute (“API”) licensed to manufacture line pipe and oil country pipe and also manufacture pipe for structural purposes that meets other recognized industry standards. All of the tubular segment's revenue is generated from sales of Company owned inventory.
The Company sells its tubular products nationally to approximately 82 customers. The Company’s principal customers for these products are steel and pipe distributors.
TTP purchases its inventory from a limited number of suppliers. Loss of any of these suppliers could have a material adverse effect on the Company’s business.
Significant financial information relating to the Company’s two product groups, flat-roll and tubular products, is contained in Note 12 of the Notes to the Company’s Consolidated Financial Statements appearing herein.
RANGE OF HIGH AND LOW SALES PRICES OF COMMON STOCK
| Fiscal 2025 |
Fiscal 2024 |
|||||||||||||||
| High |
Low |
High |
Low |
|||||||||||||
| First Quarter |
$ | 19.52 | $ | 13.78 | $ | 12.70 | $ | 9.53 | ||||||||
| Second Quarter |
19.12 | 13.71 | 18.31 | 11.97 | ||||||||||||
| Third Quarter |
18.48 | 13.40 | 16.48 | 9.50 | ||||||||||||
| Fourth Quarter |
17.80 | 13.93 | 19.33 | 15.01 | ||||||||||||
CASH DIVIDENDS DECLARED PER SHARE OF COMMON STOCK
| Fiscal 2025 |
Fiscal 2024 |
|||||||
| First Quarter |
$ | 0.04 | $ | 0.02 | ||||
| Second Quarter |
0.04 | 0.02 | ||||||
| Third Quarter |
0.04 | 0.02 | ||||||
| Fourth Quarter |
0.04 | 0.04 | ||||||
The Company’s Common Stock is traded principally on the Nasdaq Global Select (trading symbol FRD).
The approximate number of shareholders of record of Common Stock of the Company as of April 25, 2025 was 150. Because many of the Company’s common shares are held by brokers and other institutions on behalf of shareholders, the Company is unable to estimate the total number of individual shareholders represented by these record holders.
CONSOLIDATED BALANCE SHEETS
(In thousands, except for share data)
ASSETS
| March 31, | ||||||||
| 2025 | 2024 | |||||||
| CURRENT ASSETS: | ||||||||
| Cash | $ | $ | ||||||
| Accounts receivable, net of allowances for credit losses and cash discounts of $147 and $97 at March 31, 2025 and 2024, respectively | ||||||||
| Inventories | ||||||||
| Current portion of derivative assets | ||||||||
| Other current assets | ||||||||
| TOTAL CURRENT ASSETS | ||||||||
| PROPERTY, PLANT AND EQUIPMENT: | ||||||||
| Land | ||||||||
| Buildings and yard improvements | ||||||||
| Machinery and equipment | ||||||||
| Construction in process | ||||||||
| Less accumulated depreciation | ( | ) | ( | ) | ||||
| OTHER ASSETS: | ||||||||
| Operating lease right-of-use asset | ||||||||
| Other assets | ||||||||
| TOTAL ASSETS | $ | $ | ||||||
LIABILITIES AND STOCKHOLDERS’ EQUITY
| March 31, | ||||||||
| 2025 | 2024 | |||||||
| CURRENT LIABILITIES: | ||||||||
| Accounts payable and accrued expenses | $ | $ | ||||||
| Income taxes payable | ||||||||
| Dividends payable | ||||||||
| Employee compensation and related expenses | ||||||||
| Current portion of financing lease | ||||||||
| Current portion of derivative liability | ||||||||
| TOTAL CURRENT LIABILITIES | ||||||||
| POSTRETIREMENT BENEFITS OTHER THAN PENSIONS | ||||||||
| DEFERRED INCOME TAX LIABILITY | ||||||||
| NON-CURRENT LEASE LIABILITIES | ||||||||
| ASSET BASED LENDING FACILITY | ||||||||
| TOTAL LIABILITIES | ||||||||
| COMMITMENTS AND CONTINGENCIES (SEE NOTE 11) | ||||||||
| STOCKHOLDERS’ EQUITY: | ||||||||
| Common stock, par value $: | ||||||||
| Authorized shares — | ||||||||
| Issued shares — shares and shares at March 31, 2025 and 2024, respectively | ||||||||
| Additional paid-in capital | ||||||||
| Treasury stock at cost ( shares and shares at March 31, 2025 and 2024, respectively) | ( | ) | ( | ) | ||||
| Retained earnings | ||||||||
| TOTAL STOCKHOLDERS’ EQUITY | ||||||||
| TOTAL LIABILITIES AND STOCKHOLDERS’ EQUITY | $ | $ | ||||||
See accompanying notes.
CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
| Year Ended March 31, | ||||||||
| 2025 | 2024 | |||||||
| Net Sales | $ | $ | ||||||
| Costs and expenses: | ||||||||
| Cost of materials sold (excludes items shown separately below) | ||||||||
| Processing and warehousing expense | ||||||||
| Delivery expense | ||||||||
| Selling, general and administrative | ||||||||
| Depreciation and amortization | ||||||||
| Gain on disposal of property, plant and equipment | ||||||||
| EARNINGS FROM OPERATIONS | ||||||||
| Gain on economic hedges of risk | ||||||||
| Interest expense | ( | ) | ( | ) | ||||
| Other income | ||||||||
| EARNINGS BEFORE INCOME TAXES | ||||||||
| Provision for income taxes: | ||||||||
| Current | ||||||||
| Deferred | ||||||||
| NET EARNINGS | $ | $ | ||||||
| Net earnings per share: | ||||||||
| Basic | $ | $ | ||||||
| Diluted | $ | | $ | | ||||
| Cash dividends declared per common share | $ | $ | ||||||
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(In thousands)
| Year Ended March 31, |
||||||||
| 2025 |
2024 |
|||||||
| Net earnings |
$ | $ | ||||||
| Other comprehensive income: |
||||||||
| Cash flow hedges, net of tax |
||||||||
| Comprehensive income |
$ | $ | ||||||
See accompanying notes.
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
(In thousands, except per share data)
| Accumulated | ||||||||||||||||||||||||
| Other | ||||||||||||||||||||||||
| Comprehensive | Additional | |||||||||||||||||||||||
| Common | Income, | Paid-In | Treasury | Retained | ||||||||||||||||||||
| Stock | Net of Tax | Capital | Stock | Earnings | Total | |||||||||||||||||||
| BALANCE AT MARCH 31, 2023 | $ | $ | ( | ) | $ | $ | ( | ) | $ | $ | ||||||||||||||
| Net earnings | ||||||||||||||||||||||||
| Other comprehensive income | ||||||||||||||||||||||||
| Issuance of restricted stock | ( | ) | ||||||||||||||||||||||
| Paid in capital – restricted stock units | ||||||||||||||||||||||||
| Repurchase of shares | ( | ) | ( | ) | ||||||||||||||||||||
| Cash dividends ($ per share) | ( | ) | ( | ) | ||||||||||||||||||||
| BALANCE AT MARCH 31, 2024 | $ | $ | $ | $ | ( | ) | $ | $ | ||||||||||||||||
| Net earnings | ||||||||||||||||||||||||
| Issuance of restricted stock | ( | ) | ||||||||||||||||||||||
| Paid in capital – restricted stock units | ||||||||||||||||||||||||
| Repurchase of shares | ( | ) | ( | ) | ||||||||||||||||||||
| Cash dividends ($ per share) | ( | ) | ( | ) | ||||||||||||||||||||
| BALANCE AT MARCH 31, 2025 | $ | $ | $ | $ | ( | ) | $ | $ | ||||||||||||||||
See accompanying notes.
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
| Year Ended March 31, |
||||||||
| 2025 |
2024 |
|||||||
| OPERATING ACTIVITIES |
||||||||
| Net earnings |
$ | $ | ||||||
| Adjustments to reconcile net earnings to cash provided by (used in) operating activities: |
||||||||
| Depreciation and amortization |
||||||||
| Deferred taxes |
||||||||
| Compensation expense for restricted stock |
||||||||
| Change in post-retirement benefits |
||||||||
| Gain recognized on open derivatives not designated for hedge accounting |
( |
) | ( |
) | ||||
| Deferred realized loss on derivatives |
||||||||
| Gain on disposal of property, plant and equipment |
( |
) | ||||||
| Right-of-use asset |
|
|
||||||
| Decrease (increase) in operating assets: |
||||||||
| Accounts receivable |
( |
) | ||||||
| Inventories |
( |
) | ||||||
| Other current assets |
||||||||
| Increase (decrease) in operating liabilities: |
||||||||
| Accounts payable and accrued expenses |
( |
) | ||||||
| Income taxes payable |
( |
) | ||||||
| Employee compensation and related expenses |
( |
) | ||||||
| Contribution to retirement plan |
( |
) | ||||||
| NET CASH PROVIDED BY (USED IN) OPERATING ACTIVITIES |
( |
) | ||||||
| INVESTING ACTIVITIES |
||||||||
| Purchase of property, plant and equipment |
( |
) | ( |
) | ||||
| Proceeds from sale of assets |
||||||||
| Deposit on steel processing equipment |
( |
) | ||||||
| Increase in cash surrender value of officers’ life insurance |
( |
) | ( |
) | ||||
| NET CASH USED IN INVESTING ACTIVITIES |
( |
) | ( |
) | ||||
| FINANCING ACTIVITIES |
||||||||
| Cash dividends paid |
( |
) | ( |
) | ||||
| Cash paid for principal portion of finance lease |
( |
) | ( |
) | ||||
| Cash paid for share repurchases |
( |
) | ( |
) | ||||
| Borrowings on asset based lending facility |
|
|
||||||
| Repayments on asset based lending facility |
( |
) | ( |
) | ||||
| NET CASH PROVIDED BY FINANCING ACTIVITIES |
||||||||
| INCREASE (DECREASE) IN CASH AND RESTRICTED CASH |
( |
) | ||||||
| CASH AND RESTRICTED CASH AT BEGINNING OF PERIOD |
||||||||
| CASH AND RESTRICTED CASH AT END OF PERIOD |
$ | $ | ||||||
Cash and restricted cash at March 31, 2025 and 2024 included approximately $0.5 million and $3.0 million, respectively, of cash required to collateralize open derivative positions. These amounts are reported in "Other current assets" on the Company's consolidated balance sheets at March 31, 2025 and 2024.
See accompanying notes.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
1. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
BASIS OF CONSOLIDATION: The consolidated financial statements include the accounts of Friedman Industries, Incorporated and its subsidiary (collectively, the “Company”). All material intercompany amounts and transactions have been eliminated.
RECLASSIFICATIONS: The consolidated financial statements for the previous fiscal year may include certain reclassifications to conform to the current presentation. To conform with the current year presentation, the reporting classification of certain accounts and transactions was reclassified between “Cost of materials sold” and “Processing and warehousing expense”. The total impact of this reclassification was a $
REVENUE RECOGNITION: Revenue is generated primarily from contracts to manufacture or process steel products and is recognized when performance obligations are complete. Generally, the Company’s performance obligations are satisfied, control of our products is transferred, and revenue is recognized at a single point in time, when title transfers to our customer for product shipped or when services are provided. Revenue is recorded in an amount that reflects the consideration expected to be received in exchange for those goods or services. See Note 13 for further information.
TRADE RECEIVABLES: The Company’s receivables are recorded when billed, advanced or accrued and represent claims against third parties that will be settled in cash. The carrying value of the Company’s receivables, net of the allowance for credit losses and cash discounts allowed, represents their estimated net realizable value. The Company estimates its allowance for credit losses based on historical collection trends, the age of outstanding receivables and existing economic conditions. Trade receivables are generally considered past due after 30 days from invoice date. Past-due receivable balances are written-off when the Company’s internal collection efforts have been unsuccessful in collecting the amount due. The balance of the Company’s allowance for doubtful accounts was approximately $
INVENTORIES: Both flat-roll segment and tubular segment inventories consist of raw material and finished goods. Cost for substantially all of the Company's inventory is determined using the average cost method. All inventories are valued at the lower of cost or net realizable value. The Company did not have any lower of cost or net realizable value adjustments during fiscal 2025 or fiscal 2024. Obsolete or slow-moving inventories are not significant based on the Company’s review of inventories. Accordingly, no allowance has been provided for such items. Flat-roll raw material inventory consists of steel coils the Company will process into sheet and plate. Flat-roll finished goods consists of processed sheet and plate inventory. Tubular raw material inventory consists of hot-rolled steel coils that the Company will manufacture into pipe. Tubular finished goods inventory consists of pipe the Company has manufactured.
The following is a summary of inventory by product group (in thousands):
| March 31, | ||||||||
| 2025 | 2024 | |||||||
| Flat-Roll raw material | $ | $ | ||||||
| Flat-Roll finished goods | ||||||||
| Tubular raw material | ||||||||
| Tubular finished goods | ||||||||
| $ | $ | |||||||
DERIVATIVE INSTRUMENTS: From time to time, the Company may use futures contracts to partially manage exposure to price risk. All of the futures contracts entered into during fiscal 2025 and fiscal 2024 were classified as economic hedges of risk with mark-to-market ("MTM") accounting treatment. In prior fiscal years, the Company elected hedge accounting for some of its derivatives. For derivatives designated for hedge accounting and classified as cash flow hedges, changes in fair value are recognized as a component of other comprehensive income and reclassified into earnings during the period in which the hedged transaction affects earnings. For derivatives designated for hedge accounting and classified as fair value hedges, changes in fair value are recognized in the same balance sheet line as the hedged item until the hedged item affects earnings. For derivatives where hedge accounting is not elected, changes in fair value are immediately recognized in earnings. The Company has forward physical purchase supply agreements in place for a portion of its monthly physical steel needs. These supply agreements are not subject to mark-to-market accounting due to the Company electing the normal purchase normal sales exclusion provided in Accounting Standards Codification 815 - Derivatives and Hedging. See Note 6 for further information about the Company's derivative instruments.
PROPERTY, PLANT AND EQUIPMENT: Property, plant and equipment is stated at cost except for assets acquired through business combination which are stated at their acquisition date fair value. Depreciation is calculated primarily by the straight-line method over the estimated useful lives of the various classes of assets as follows:
| Buildings (in years) | ||||
| Machinery and equipment (in years) | ||||
| Land improvements (in years) | ||||
| Furniture (in years) | ||||
| Equipment - Technology (in years) | ||||
| Buildings - Small Remodel/Furnace/HVAC (in years) |
The Company reviews its long-lived assets for impairment whenever events or changes in circumstances indicate that their carrying amount may not be recoverable. The Company assesses recoverability by comparing the carrying amount of the asset or asset group to estimated undiscounted future cash flows expected to be generated by the asset or asset group. If an asset or asset group is considered impaired, the impairment loss to be recognized is measured as the amount by which the asset’s or asset group's carrying amount exceeds its estimated fair value. The Company did not identify any indicators of impairment during fiscal 2025 or fiscal 2024.
When property, plant and equipment is sold or otherwise disposed of, any gains or losses are reflected in income. If a loss on disposal is expected, such losses are recognized when the assets are reclassified as assets held for sale.
Maintenance and repairs are expensed as incurred.
POSTRETIREMENT BENEFITS OTHER THAN PENSIONS: The Company maintains life insurance policies on each officer. From time to time and in its discretion, the Board of Directors of the Company has approved the transfer of the applicable policy to an officer upon their retirement. The Company’s accrued liability for these potential future transfers was approximately $
SHIPPING COSTS: Sales are increased for freight billed to customers and freight costs are a component of cost of products sold and shown discretely as "Delivery expense" on the consolidated statements of operations.
SUPPLEMENTAL CASH FLOW INFORMATION: The Company paid interest of approximately $
INCOME TAXES: The Company accounts for income taxes under the liability method, whereby the Company recognizes deferred tax assets and liabilities, which represent differences between the financial and income tax reporting bases of its assets and liabilities. Deferred tax assets and liabilities are determined based on temporary differences between income and expenses reported for financial reporting and tax reporting. The Company has assessed, using all available positive and negative evidences, the likelihood that the deferred tax assets will be recovered from future taxable income.
The Company has also analyzed tax positions taken on tax returns filed and does not believe that any are more likely than not to be overturned by the respective tax jurisdiction. Therefore,
USE OF ESTIMATES: The preparation of financial statements in conformity with U.S. generally accepted accounting principles may require management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. Actual results could differ from any estimates. The Company did not identify any significant estimates or judgements related to the consolidated financial statements and accompanying notes presented in this annual report.
FINANCIAL INSTRUMENTS: Since the Company’s financial instruments are considered short-term in nature, their carrying values approximate fair value.
EARNINGS PER SHARE: The Company uses the two-class method of calculating earnings per share, which determines earnings per share for each class of common stock and participating security as if all earnings of the period had been distributed. As the holders of restricted stock are entitled to receive non-forfeitable dividends during the restriction period, unvested shares of restricted stock qualify as participating securities. Unvested restricted shares participate on an equal basis with common shares; therefore, there is no difference in undistributed earnings allocated to each participating security. Unvested restricted stock is forfeitable until earned and therefore not considered outstanding for basic earnings per share. Net income per basic common share is computed using the weighted average number of common shares outstanding during the period and net income attributable to common stockholders is adjusted to allocate dividends paid to unvested shares as well as undistributed earnings. Net income per diluted common share is computed using the weighted average number of common shares and participating securities outstanding during the period.
ECONOMIC RELATIONSHIP: The Company purchases its inventory from a limited number of suppliers. Loss of any of these suppliers could have a material adverse effect on the Company.
Flat-roll segment sales to O'Neal Steel accounted for approximately
The Company’s sales are concentrated primarily in the midwestern, southwestern, and southeastern regions of the United States and are primarily to customers in the steel distributing and fabricating industries. The Company performs periodic credit evaluations of the financial conditions of its customers and generally does not require collateral. Generally, receivables are due within 30 days.
RECENTLY ISSUED ACCOUNTING PRONOUNCEMENTS: In November 2024, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update No. 2024-03, Income Statement – Reporting Comprehensive Income – Expense Disaggregation Disclosures: Disaggregation of Income Statement Expenses (“ASU 2024-03”). ASU 2024-03 will require more detailed information about the types of expenses in commonly presented income statement captions such as “Cost of sales” and “Selling, general and administrative expenses”. The new guidance is effective for annual reporting periods beginning after December 15, 2026, and interim reporting periods beginning after December 15, 2027 with early adoption permitted. The Company is evaluating the impact that adoption of the provisions of ASU 2024-03 will have on its consolidated financial statements.
In December 2023, the FASB issued Accounting Standards Update No. 2023-09, Improvements to Income Tax Disclosures ("ASU 2023-09"). ASU 2023-09 requires that an entity disclose specific categories in the rate reconciliation, provide additional information for reconciling items that are greater than 5 percent of the amount computed by multiplying pretax income (or loss) by the applicable statutory income tax rate, and provide income taxes paid by jurisdiction that are greater than 5 percent of total income taxes paid. The standard also requires that entities disclose income (or loss) from continuing operations before income tax expense (or benefit) and income tax expense (or benefit) each disaggregated between domestic and foreign operations. ASU 2023-09 is effective for annual periods beginning after December 15, 2024. Early adoption is permitted for annual financial statements that have not yet been issued or made available for issuance. ASU 2023-09 is to be applied on a prospective basis, but retrospective application is permitted. The Company is evaluating the impact that adoption of the provisions of ASU 2023-09 will have on its consolidated financial statements.
RECENTLY ADOPTED ACCOUNTING PRONOUNCEMENTS: In November 2023, the FASB issued Accounting Standards Update No. 2023-07, Improvements to Reportable Segment Disclosures ("ASU 2023-07"). ASU 2023-07 includes requirements that an entity disclose the title of the chief operating decision maker (CODM) and on an interim and annual basis, significant segment expenses and the composition of other segment items for each segment's reported profit. The standard also permits disclosure of additional measures of segment profit. ASU 2023-07 is effective for fiscal years beginning after December 15, 2023, and interim periods within fiscal years beginning after December 15, 2024. We adopted this guidance retrospectively on March 31, 2025. As a result, our segment disclosures now include presentation of significant segment expenses and disclosure of our CODMs. The adoption of this guidance affect only our disclosures, with no impacts to our financial condition and results of operations.
2. EQUITY COMPENSATION PLANS AND CAPITAL STOCK
The Company maintains the Friedman Industries, Incorporated 2016 Restricted Stock Plan (the “Plan”). The Plan is administered by the Compensation Committee (the “Committee”) of the Board of Directors (the “Board”) and continues indefinitely until terminated by the Board or until all shares allowed by the Plan have been awarded and earned. The aggregate number of shares of the Company’s Common Stock eligible for award under the Plan is
The following table summarizes the activity related to restricted stock units ("RSUs") for the two years ended March 31, 2025:
| Weighted | ||||||||
| Average Grant | ||||||||
| Number of | Date Fair Value | |||||||
| Shares | Per Share | |||||||
| Unvested at March 31, 2023 | $ | |||||||
| Granted | ||||||||
| Vested | ( | ) | ||||||
| Unvested at March 31, 2024 | $ | |||||||
| Granted | ||||||||
| Vested | ( | ) | ||||||
| Unvested at March 31, 2025 | $ | |||||||
We measure compensation expense for RSUs at the market price of our common stock as of the grant date. Compensation expense is recognized over the requisite service period applicable to each award. The Company recorded compensation expense of approximately $
At both March 31, 2025 and 2024, unrecognized compensation expense related to unvested RSUs was approximately $
As of March 31, 2025, a total of
The Company has
On December 13, 2023, the Company repurchased
3. DEBT
The Company has a $
The Company incurred debt issuance costs of approximately $
4. LEASES
The Company has an operating lease for the Granite City, IL facility with an expiration date of August 31, 2028 and optional renewal provisions for up to 4 renewal terms of years each. The lease calls for monthly rental payments that adjust on an annual basis. The monthly rental payment in place at March 31, 2025 and remaining in place until adjustment in September 2025 is approximately $
In October 2019, the Company received a new heavy-duty forklift under a
The components of expense related to leases were as follows for the fiscal years ended March 31, 2025 and 2024 (in thousands):
| Fiscal 2025 | Fiscal 2024 | |||||||
| Finance lease – amortization of ROU asset | $ | $ | ||||||
| Finance lease – interest on lease liability | ||||||||
| Operating lease expense | ||||||||
| $ | $ | |||||||
The following table illustrates the balance sheet classification for ROU assets and lease liabilities as of March 31, 2025 and 2024 (in thousands):
| March 31, 2025 | March 31, 2024 | Balance Sheet Classification | |||||||
| Assets | |||||||||
| Operating lease right-of-use asset | $ | $ | Operating lease right-of-use asset | ||||||
| Finance lease right-of-use asset |
| ||||||||
| Total right-of-use assets | $ | $ | |||||||
| Liabilities | |||||||||
| Operating lease liability, current | $ | $ |
| ||||||
| Finance lease liability, current | Current portion of finance lease | ||||||||
| Operating lease liability, non-current |
| ||||||||
| Total lease liabilities | $ | $ | |||||||
As of March 31, 2025, the weighted-average remaining lease term was
Maturities of lease liabilities as of March 31, 2025 were as follows (in thousands):
| Operating | Finance | |||||||
| Leases | Leases | |||||||
| Fiscal 2026 | — | |||||||
| Fiscal 2027 | — | |||||||
| Fiscal 2028 | — | |||||||
| Fiscal 2029 | — | |||||||
| Fiscal 2030 and beyond | — | |||||||
| Total undiscounted lease payments | $ | $ | — | |||||
| Less: imputed interest | ( | ) | — | |||||
| Present value of lease liability | $ | $ | — | |||||
5. PROPERTY, PLANT AND EQUIPMENT
At March 31, 2025, the Company's construction in process balance of approximately $
Depreciation expense was approximately $
6. DERIVATIVE FINANCIAL INSTRUMENTS
From time to time, we expect to utilize derivative financial instruments to minimize our exposure to commodity price risk that is inherent in our business. During fiscal 2025, all of the Company's hedging activities were classified as economic hedges of risk with mark-to-market ("MTM") accounting treatment. During fiscal 2024, the Company had hedging activities classified as cash flow hedges with hedge accounting treatment according to the requirements of ASC 815– Derivatives and Hedging and hedging activities classified as economic hedges of risk with MTM accounting treatment. By using derivatives, the Company is exposed to credit and market risk. The Company’s exposure to credit risk includes the counterparty’s failure to fulfill its performance obligations under the terms of the derivative contract. The Company attempts to minimize its credit risk by entering into transactions with high quality counterparties, and uses exchange-traded derivatives when available. Market risk is the risk that the value of the financial instrument might be adversely affected by a change in commodity prices. The Company manages market risk by continually monitoring exposure within its risk management strategy and portfolio. For any transactions designated as hedging instruments, we document all relationships between hedging instruments and hedged items, as well as our risk-management objective and strategy for undertaking the various hedge transactions. We also assess, both at the hedge’s inception and on an ongoing basis, whether the derivatives used in hedging transactions are highly effective in offsetting changes in cash flows or fair value of hedged items.
The Company has forward physical purchase supply agreements in place for a portion of its monthly physical steel needs. These supply agreements are not subject to mark-to-market accounting due to the Company electing the normal purchase normal sale exclusion provided in ASC 815.
At March 31, 2025 and 2024, the Company did not have any hot-rolled coil futures contracts designated as hedging instruments and classified as cash flow or fair value hedges.
The following table summarizes the fair value of the Company’s derivative financial instruments and the respective line in which they were recorded in the Consolidated Balance Sheet as of March 31, 2025 (in thousands):
| Asset Derivatives | Liability Derivatives | |||||||||
| Balance Sheet | Balance Sheet | |||||||||
| Derivatives not designated as hedging instruments: | Location | Fair Value | Location | Fair Value | ||||||
| Hot-rolled coil steel contracts |
| $ |
| $ | ||||||
The following table summarizes the fair value of the Company’s derivative financial instruments and the respective line in which they were recorded in the Consolidated Balance Sheet as of March 31, 2024 (in thousands):
| Asset Derivatives | Liability Derivatives | |||||||||
| Balance Sheet | Balance Sheet | |||||||||
| Derivatives not designated as hedging instruments: | Location | Fair Value | Location | Fair Value | ||||||
| Hot-rolled coil steel contracts |
| $ |
| $ | ||||||
All derivatives are presented on a gross basis on the Consolidated Balance Sheet.
During fiscal 2025 and fiscal 2024, the Company also entered into hot-rolled coil futures contracts that were not designated as hedging instruments for accounting purposes. Accordingly, the change in fair value related to these instruments was immediately recognized in earnings for these periods. During fiscal 2025 and fiscal 2024, the Company did not designate any transactions as hedging instruments for accounting purposes. During fiscal 2024, the Company reclassified the loss associated with previously designated cash flow hedges into earnings during the period.
The following table summarizes the pre-tax gain (loss) recognized in other comprehensive income and the loss reclassified from accumulated other comprehensive income into earnings for derivative financial instruments designated as cash flow hedges for the fiscal year ended March 31, 2024 (in thousands):
| Location of Loss | Pre- Tax | ||||||||
| Pre-Tax Gain (Loss) | Reclassified from | Loss Reclassified from | |||||||
| Recognized in OCI | AOCI into Net Earnings | AOCI into Net Earnings | |||||||
| For the fiscal year ended March 31, 2024 | |||||||||
| Hot-rolled coil steel contracts | $ | Sales | $ | ( | ) | ||||
| Total | $ | $ | ( | ) | |||||
The following table summarizes the gain recognized in earnings for derivative instruments not designated as hedging instruments during fiscal 2025 (in thousands):
| Gain Recognized in Earnings | |||||
| Location of Gain | for Fiscal Year Ended | ||||
| Recognized in Earnings | March 31, 2025 | ||||
| Hot-rolled coil steel contracts | Gain on economic hedges of risk | $ | |||
The following table summarizes the gain recognized in earnings for derivative instruments not designated as hedging instruments during fiscal 2024 (in thousands):
| Gain Recognized in Earnings | |||||
| Location of Gain | for Fiscal Year Ended | ||||
| Recognized in Earnings | March 31, 2024 | ||||
| Hot-rolled coil steel contracts | Gain on economic hedges of risk | $ | |||
The notional amount (quantity) of our derivative instruments not designated as hedging instruments at March 31, 2025 consisted of
The following table reflects the change in accumulated other comprehensive income (loss), net of tax, for the fiscal year ended March 31, 2024 (in thousands):
| Gain (Loss) on | ||||
| Derivatives | ||||
| Balance at March 31, 2023 | ( | ) | ||
| Other comprehensive loss, net of income, before reclassification | ||||
| Total loss reclassified from AOCI (1) | ||||
| Net current period other comprehensive income | ||||
| Balance at March 31, 2024 | $ | |||
(1) The loss reclassified from AOCI is presented net of taxes of approximately $
At March 31, 2025 and 2024, cash of approximately $
7. FAIR VALUE MEASUREMENTS
Accounting standards provide a comprehensive framework for measuring fair value and sets forth a definition of fair value and establishes a hierarchy prioritizing the inputs to valuation techniques, giving the highest priority to quoted prices in active markets for identical assets and liabilities and the lowest priority to unobservable value inputs. Levels within the hierarchy are defined as follows:
| ● | Level 1 – Quoted prices for identical assets and liabilities in active markets. |
| ● | Level 2 – Inputs other than quoted prices included within Level 1 that are observable for the assets and liabilities, either directly or indirectly. |
| ● | Level 3 – Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets and liabilities. |
Recurring Fair Value Measurements
At March 31, 2025, our financial assets, net, measured at fair value on a recurring basis were as follows (in thousands):
| Quoted Prices | ||||||||||||||||
| in Active | Significant | |||||||||||||||
| Markets for | Other | Significant | ||||||||||||||
| Identical | Observable | Unobservable | ||||||||||||||
| Assets | Inputs | Inputs | ||||||||||||||
| (Level 1) | (Level 2) | (Level 3) | Total | |||||||||||||
| Commodity futures – financial assets, net | $ | $ | $ | $ | ||||||||||||
| Total | $ | $ | $ | $ | ||||||||||||
At March 31, 2024, our financial liabilities, net, measured at fair value on a recurring basis were as follows (in thousands):
| Quoted Prices | ||||||||||||||||
| in Active | Significant | |||||||||||||||
| Markets for | Other | Significant | ||||||||||||||
| Identical | Observable | Unobservable | ||||||||||||||
| Assets | Inputs | Inputs | ||||||||||||||
| (Level 1) | (Level 2) | (Level 3) | Total | |||||||||||||
| Commodity futures – financial liabilities, net | $ | ( | ) | $ | $ | $ | ( | ) | ||||||||
| Total | $ | ( | ) | $ | $ | $ | ( | ) | ||||||||
At March 31, 2025 and 2024, the Company did not have any fair value measurements on a non-recurring basis.
8. EARNINGS PER SHARE
Basic and dilutive net earnings per share is computed based on the following information (in thousands, except for share data):
| Year Ended March 31, |
||||||||
| 2025 |
2024 |
|||||||
| Numerator (basic and diluted) |
||||||||
| Net earnings |
$ | $ | ||||||
| Less: Allocation to unvested restricted stock units |
$ | $ | ||||||
| Net earnings attributable to common shareholders |
||||||||
| Denominator (basic and diluted) |
||||||||
| Weighted average common shares outstanding |
||||||||
For fiscal 2025 and fiscal 2024, the Company allocated dividends and undistributed earnings to the unvested restricted stock units.
As the restricted stock qualifies as participating securities, the following restricted stock units were not accounted in the computation of weighted average diluted common shares outstanding under the two-class method:
| Year Ended March 31, |
||||||||
| 2025 |
2024 |
|||||||
| Restricted Stock Units |
||||||||
9. INCOME TAXES
Components of tax expense are as follows (in thousands):
| Year Ended March 31, | ||||||||
| 2025 | 2024 | |||||||
| Federal | ||||||||
| Current | $ | $ | ||||||
| Deferred | ||||||||
| State | ||||||||
| Current | ||||||||
| Deferred | ||||||||
| Total | $ | $ | ||||||
The U.S. federal statutory income tax rate is reconciled to the effective rate as follows:
| Year Ended March 31, | ||||||||
| 2025 | 2024 | |||||||
| Income tax expense at U.S. federal statutory rate | % | % | ||||||
| Current year state and local income taxes net of federal income tax benefit | ||||||||
| Other | ( | ) | ||||||
| Provision for income taxes | % | % | ||||||
The Company’s tax returns may be subject to examination by the Internal Revenue Service for the fiscal years ended March 31, 2022 through March 31, State and local returns may be subject to examination for fiscal years ended March 31, 2021 through March 31,
Deferred income taxes are provided for temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Significant components of the Company’s consolidated deferred tax assets (liabilities) are as follows (in thousands):
| March 31, | ||||||||
| 2025 | 2024 | |||||||
| Deferred tax liabilities: | ||||||||
| Depreciation | $ | ( | ) | $ | ( | ) | ||
| Unrealized gain - mark to market derivatives | ( | ) | ||||||
| Total deferred tax liabilities | ( | ) | ( | ) | ||||
| Deferred tax assets: | ||||||||
| Inventory capitalization | ||||||||
| Interest expense limitation | ||||||||
| Postretirement benefits other than pensions | ||||||||
| Restricted stock compensation | ||||||||
| Unrealized Loss - mark to market derivatives | ||||||||
| Other | ||||||||
| Total deferred tax assets | ||||||||
| Net deferred tax liability | $ | ( | ) | $ | ( | ) | ||
10. OTHER COMPREHENSIVE INCOME
The following table summarizes the tax effects on each component of Other Comprehensive Income for the fiscal year ended March 31, 2024 (in thousands):
| Fiscal Year Ended March 31, 2024 | ||||||||||||
| Before-Tax | Tax Provision | Net-of-Tax | ||||||||||
| Cash flow hedges | $ | $ | ( | ) | $ | |||||||
| Other comprehensive income | $ | $ | ( | ) | $ | |||||||
11. RETIREMENT PLAN
The Company maintains the Friedman Industries, Inc. Employees’ Retirement and 401(k) Plan (the “Plan”). Employees fully vest in the Plan upon years of service.
Employees may elect to participate in the 401(k) portion of the Plan. Employees are eligible to participate in the Plan when the employee has completed sixty calendar days of service. Under the Plan, participating employees may defer a portion of their earnings up to certain limits prescribed by the Internal Revenue Service. The Company provides matching contributions under the provisions of the Plan. Contribution expense related to the 401(k) portion of the Plan was approximately $
The retirement portion of the Plan covers substantially all employees, including officers. Any contributions are determined at the discretion of the Board of Directors in an amount not to exceed
12. INDUSTRY SEGMENT DATA
The Company is engaged in the steel processing, pipe manufacturing and processing and steel and pipe distribution business. Within the Company, there are two product groups: flat-roll and tubular. The Company’s flat-roll operations consist primarily of converting steel coils into flat sheet and plate steel cut to customer specifications. Through its tubular operations, the Company purchases, processes, manufactures and markets tubular products.
Segment results are reviewed regularly by the Company’s Chief Operating Decision Makers (“CODMs”). The Company’s CODMs are comprised of the Chief Executive Officer and the Chief Financial Officer. The CODMs assess segment performance and allocate resources based on a number of factors with the most emphasis placed on earnings from operations.
The following is a summary of significant financial information relating to the product groups (in thousands):
| Year Ended March 31, 2025 | ||||||||||||||||
| Flat-roll | Tubular | Other | Total | |||||||||||||
| Net Sales | $ | $ | $ | |||||||||||||
| Cost and expenses: | ||||||||||||||||
| Cost of materials sold | — | |||||||||||||||
| Processing and warehousing expense | — | |||||||||||||||
| Delivery expense | — | |||||||||||||||
| Commercial expense | — | |||||||||||||||
| Depreciation and amortization | ||||||||||||||||
| General corporate expenses | — | — | ||||||||||||||
| Gain (loss) on disposal of property, plant and equipment | ( | ) | ||||||||||||||
| EARNINGS (LOSS) FROM OPERATIONS: | ( | ) | ( | ) | ||||||||||||
| Gain on economic hedges of risk | ||||||||||||||||
| Interest expense | ( | ) | ||||||||||||||
| Other income | ||||||||||||||||
| EARNINGS BEFORE INCOME TAXES | $ | |||||||||||||||
| Year Ended March 31, 2024 | ||||||||||||||||
| Flat-roll | Tubular | Other | Total | |||||||||||||
| Net Sales | $ | $ | $ | |||||||||||||
| Cost and expenses: | ||||||||||||||||
| Cost of materials sold | — | |||||||||||||||
| Processing and warehousing expense | — | |||||||||||||||
| Delivery expense | — | |||||||||||||||
| Commercial expense | — | |||||||||||||||
| Depreciation and amortization | ||||||||||||||||
| General corporate expenses | — | — | ||||||||||||||
| EARNINGS (LOSS) FROM OPERATIONS: | ( | ) | ||||||||||||||
| Gain on economic hedges of risk | ||||||||||||||||
| Interest expense | ( | ) | ||||||||||||||
| Other income | ||||||||||||||||
| EARNINGS BEFORE INCOME TAXES | $ | |||||||||||||||
| Year Ended March 31, | ||||||||||||||||
| 2025 | 2024 | |||||||||||||||
| IDENTIFIABLE ASSETS: | ||||||||||||||||
| Flat-roll | $ | $ | ||||||||||||||
| Tubular | ||||||||||||||||
| General corporate assets | ||||||||||||||||
| TOTAL ASSETS | $ | $ | ||||||||||||||
| CAPITAL EXPENDITURES: | ||||||||||||||||
| Flat-roll | $ | $ | ||||||||||||||
| Tubular | ||||||||||||||||
| Corporate and other | ||||||||||||||||
| TOTAL CAPITAL EXPENDITURES | $ | $ | ||||||||||||||
General corporate expenses reflect general and administrative expenses not directly associated with segment operations and consist primarily of corporate and accounting salaries, professional fees and services, retirement plan contribution expense, corporate insurance expenses, restricted stock plan compensation expense and office supplies. At March 31, 2025 and 2024, corporate assets consisted primarily of cash, restricted cash, leased administrative office right-of-use assets, unamortized debt issuance costs and the cash value of officers’ life insurance. Although inventory is transferred at cost between product groups, there are no sales between product groups.
13. REVENUE
Revenue is generated primarily from contracts to manufacture or process steel products. Most of the Company’s revenue is generated by sales of material out of the Company’s inventory but a portion of the Company’s revenue is derived from processing or storage of customer owned material. Generally, the Company’s performance obligations are satisfied, control of our products is transferred, and revenue is recognized at a single point in time, when title transfers to our customer for product shipped or when services are provided. Revenues are recorded net of any sales incentives. Shipping and other transportation costs charged to customers are treated as fulfillment activities and are recorded in both revenue and cost of sales at the time control is transferred to the customer. Costs related to obtaining sales contracts are incidental and expensed when incurred. Because customers are invoiced at the time title transfers and the Company’s rights to consideration are unconditional at that time, the Company does not maintain contract asset balances. Additionally, the Company does not maintain contract liability balances, as performance obligations are satisfied prior to customer payment for product. The Company offers industry standard payment terms.
The Company has reportable segments: Flat-Roll and Tubular. Flat-roll primarily generates revenue from cutting to length hot-rolled steel coils. Flat-roll segment revenue consists of two product types: Company Owned Flat-Roll Products and Processing or Storage of Customer Owned Coil. Tubular primarily generates revenue from selling steel pipe it has manufactured resulting in a single product type: Manufactured Pipe.
The following table disaggregates our revenue by product for each of our reportable business segments for the fiscal years ended March 31, 2025 and 2024, respectively (in thousands):
| Fiscal Year Ended March 31, | ||||||||
| 2025 | 2024 | |||||||
| Flat-Roll Segment: | ||||||||
| Company Owned Flat-Roll Products | $ | $ | ||||||
| Processing or Storage of Customer Owned Coil | ||||||||
| $ | 404,644 | $ | 472,774 | |||||
| Tubular Segment: | ||||||||
| Manufactured Pipe | $ | $ | ||||||
| $ | $ | |||||||
SCHEDULE II — VALUATION AND QUALIFYING ACCOUNTS
FRIEDMAN INDUSTRIES, INCORPORATED
(In thousands)
| Description | Balance at | |||||||||||||||
| Beginning | Balance at | |||||||||||||||
| of Period | Additions (A) | Deductions (B) | End of Period | |||||||||||||
| Year ended March 31, 2025 | ||||||||||||||||
| Allowance for credit losses and cash discounts (deducted from related asset account) | $ | $ | $ | |||||||||||||
| Year ended March 31, 2024 | ||||||||||||||||
| Allowance for credit losses and cash discounts (deducted from related asset account) | $ | $ | ( | ) | $ | |||||||||||
| (A) | Additions consist of charges to bad debt expense of approximately $ |
| (B) | Deductions consist of accounts receivable written off of approximately $ |
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Shareholders and the Board of Directors of
Friedman Industries, Incorporated
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of Friedman Industries, Incorporated and subsidiary (the “Company”) as of March 31, 2025 and 2024, the related consolidated statements of operations, comprehensive income, stockholders’ equity, and cash flows for each of the years then ended, and the related notes and schedule (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the consolidated financial position of the Company as of March 31, 2025 and 2024, and the consolidated results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the Company’s internal control over financial reporting as of March 31, 2025, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated June 12, 2025 expressed an unqualified opinion on the Company’s internal control over financial reporting.
Basis for Opinion
These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures to respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical Audit Matters
Critical audit matters are matters arising from the current period audit of the consolidated financial statements that were communicated or required to be communicated to the audit committee and that (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. We determined that there are no critical audit matters.
/s/
June 12, 2025
We have served as the Company’s auditor since 2017.
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Shareholders and the Board of Directors of
Friedman Industries, Incorporated
Opinion on Internal Control Over Financial Reporting
We have audited Friedman Industries, Incorporated and subsidiary's (the “Company”) internal control over financial reporting as of March 31, 2025, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of March 31, 2025, based on criteria established in Internal Control - Integrated Framework (2013) issued by COSO.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the consolidated balance sheets of Friedman Industries, Incorporated and subsidiary as of March 31, 2025 and 2024, the related consolidated statements of operations, comprehensive income, stockholders’ equity, and cash flows for the years then ended, and the related notes and schedule (collectively referred to as the “consolidated financial statements”) and our report dated June 12, 2025 expressed an unqualified opinion on those consolidated financial statements.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
Definition and Limitations of Internal Control Over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ Moss Adams LLP
Houston, Texas
June 12, 2025
We have served as the Company’s auditor since 2017.
EVALUATION OF DISCLOSURE CONTROLS AND PROCEDURES
We have established disclosure controls and procedures designed to ensure that material information required to be disclosed in our reports filed under the Exchange Act is recorded, processed, summarized and reported within the time periods specified by the SEC and that any material information relating to us is recorded, processed, summarized and reported to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosures. In designing and evaluating our disclosure controls and procedures, our management recognizes that controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving desired control objectives. In reaching a reasonable level of assurance, our management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures. As required by Rule 13a-15(b) under the Exchange Act, we have evaluated, under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) as of the end of the period covered by this Annual Report. Based on this evaluation, the Company’s Chief Executive Officer and Chief Financial Officer have concluded the Company’s disclosure controls and procedures were effective as of the evaluation date.
MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as is defined in the Exchange Act. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements for external reporting purposes in accordance with GAAP.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Our management conducted an evaluation, under the supervision and with the participation of our Chief Executive Officer and Chief Financial Officer, of the effectiveness of our internal control over financial reporting based on the framework in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Based on this evaluation, our management concluded that our internal control over financial reporting was effective at March 31, 2025.
Changes in Internal Control over Financial Reporting
There were no changes in our internal control over financial reporting that occurred during our most recent fiscal quarter ended March 31, 2025 that have materially affected, or are reasonably likely to materially effect, our internal control over financial reporting.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
COMPANY OVERVIEW
Friedman Industries, Incorporated is a manufacturer and processor of steel products and operates in two reportable segments: flat-roll products and tubular products.
The flat-roll product segment consists of the operation of five hot-rolled coil processing facilities located in Hickman, Arkansas; Decatur, Alabama; East Chicago, Indiana; Granite City, Illinois and Sinton, Texas. The Hickman, Granite City and East Chicago facilities operate temper mills and cut-to-length lines. The Decatur and Sinton facilities operate stretcher leveler cut-to-length lines. The equipment at all locations improve the flatness and surface quality of the coils and cut the coils into sheet and plate of prescribed lengths. On a combined basis, the facilities are capable of cutting sheet and plate with thicknesses ranging from 16 gauge to 1” thick in widths ranging from 36” wide to 96” wide. The vast majority of flat-roll product segment revenue is generated from sales of Company owned inventory but the segment also generates revenue from the processing or storage of customer owned coils on a fee basis.
The tubular product segment consists of the Company’s Texas Tubular Products division (“TTP”) located in Lone Star, Texas. TTP operates two electric resistance welded pipe mills with a combined outside diameter (“OD”) size range of 2 3/8” OD to 8 5/8” OD. Both pipe mills are American Petroleum Institute (“API”) licensed to manufacture line pipe and oil country pipe and also manufacture pipe for structural purposes that meets other recognized industry standards. All of the tubular segment's revenue is generated from sales of Company owned inventory.
RESULTS OF OPERATIONS
Year ended March 31, 2025 compared to year ended March 31, 2024
During the year ended March 31, 2025 ("fiscal 2025"), sales, costs of materials sold and adjusted gross profit decreased approximately $71.7 million, $46.7 million and $25.0 million, respectively, from the comparable amounts recorded during the year ended March 31, 2024 (“fiscal 2024”). Adjusted gross profit is a non-GAAP measure calculated as sales minus cost of materials sold. The decrease in sales was primarily related to a decline in the average selling price per ton accompanied by a decrease in sales volume. Sales volume for fiscal 2025 consisted of approximately 503,000 tons from inventory and another 76,500 tons of toll processing customer owned material compared to fiscal 2024 volume consisting of approximately 509,000 tons from inventory and 101,000 tons of toll processing. The decline in sales volume for the fiscal 2025 period was related to a combination of challenging conditions for some of our customers, extended planned downtime for equipment upgrades, and political uncertainty leading up to the presidential election. Adjusted gross profit decreased from approximately $103.9 million for fiscal 2024 to approximately $79.0 million for fiscal 2025. Adjusted gross profit as a percentage of sales decreased from approximately 20.1% in fiscal 2024 to approximately 17.8% in fiscal 2025.
Our operating results are significantly impacted by the market price of hot-rolled steel coil ("HRC"). Entering fiscal 2025, HRC prices were on a predominately declining trend dropping approximately 40% from January 2024 through the middle of August 2024. Prices remained relatively stable at the bottom of the price cycle until February 2025 with prices then increasing approximately 37% by the end of fiscal 2025. As a result, the Company experienced compressed physical margins for the first three quarters of fiscal 2025 followed by margin improvement in the fourth quarter. Entering fiscal 2024, HRC prices had increased approximately 95% from November 2022 to April 2023. HRC prices then declined approximately 45% until October 2023 with prices then increasing by approximately 63% by the end of January 2024 and then entering the downward trend that continued into fiscal 2025. As a result, fiscal 2024 benefitted from strong physical margins for the first fiscal quarter followed by compressed margins during the second and third fiscal quarters with margin improvement during the fourth fiscal quarter. The Company utilizes HRC futures to partially manage exposure to commodity price risk. The Company recognized hedging related gains of approximately $7.6 million and $1.4 million in fiscal 2025 and fiscal 2024, respectively.
Flat-Roll Segment
Flat-roll product segment sales for fiscal 2025 totaled approximately $404.6 million compared to approximately $472.8 million for fiscal 2024. For a more complete understanding of the average selling prices of goods sold, it is helpful to exclude any sales generated from processing or storage of customer owned material. Sales generated from processing or storage of customer owned material totaled approximately $4.8 million for fiscal 2025 compared to approximately $5.3 million for fiscal 2024. Sales generated from flat-roll segment inventory totaled approximately $399.8 million for fiscal 2025 compared to approximately $467.5 million for fiscal 2024. The average per ton selling price related to these shipments decreased from approximately $987 per ton in fiscal 2024 to approximately $859 per ton in fiscal 2025. Flat-roll segment sales volume for fiscal 2025 consisted of approximately 465,500 tons from inventory and another 76,500 tons of toll processing customer owned material compared to fiscal 2024 volume consisting of approximately 474,000 tons from inventory and 101,000 tons of toll processing. The decline in sales volume for fiscal 2025 was related to a combination of challenging conditions for some of our customers, extended downtime for equipment upgrades, and political uncertainty leading up the presidential election. The flat-roll segment recorded earnings from operations of approximately $13.7 million and $33.2 million in fiscal 2025 and fiscal 2024, respectively.
The Company’s flat-roll segment purchases its inventory from a limited number of suppliers. Loss of any of these suppliers could have a material adverse effect on the Company’s business.
Tubular Segment
Tubular product segment sales for fiscal 2025 totaled approximately $40.0 million compared to approximately $43.5 million for fiscal 2024. Sales decreased primarily due to a decline in the average selling price per ton, offset by a slight increase in the volume sold. The average per ton selling price decreased from approximately $1,239 per ton for fiscal 2024 to approximately $1,059 per ton for fiscal 2025. Tons sold increased from approximately 35,000 tons in fiscal 2024 to approximately 37,500 tons in fiscal 2025. Tubular segment operations recorded a loss from operations of approximately $1.4 million for fiscal 2025 compared to earnings from operations of approximately $3.0 million in fiscal 2024.
The tubular segment purchases its inventory from a limited number of suppliers. Loss of any of these suppliers could have a material adverse effect on the Company’s business.
Selling, General and Administrative Costs
During fiscal 2025, selling, general and administrative costs decreased approximately $4.9 million compared to fiscal 2024. This decrease is primarily related to lower incentive compensation expense due to lower earnings for fiscal 2025.
Income Taxes
Income taxes decreased from a provision for fiscal 2024 of approximately $6.0 million to a provision for fiscal 2025 of approximately $1.6 million. This decrease was related primarily to lower earnings before tax for fiscal 2025 compared to fiscal 2024.
Non-GAAP Information
The non-GAAP measure adjusted gross profit is used in this Management's Discussion and Analysis. Adjusted gross profit is calculated as sales minus cost of materials sold. Cost of materials sold is a discrete line on our statements of operations and represents the cost associated with purchased steel, inbound freight, transfer freight and certain external processing costs. To provide financial statement users with a better understanding of the Company's expenses, cost of sales is disaggregated on our statements of operations into the line items cost of materials sold, processing and warehousing expense, delivery expense and depreciation and amortization. The Company believes adjusted gross profit is a meaningful measure because our cost structure and operating results are significantly impacted by the fluctuating costs associated with purchased steel.
The following table reconciles the GAAP measure for gross profit to the non-GAAP measure adjusted gross profit (in thousands):
| Year Ended March 31, | ||||||||
| 2025 |
2024 |
|||||||
| Gross profit (GAAP measure) |
18,956 | 45,557 | ||||||
| Processing and warehousing expense |
33,477 | 31,438 | ||||||
| Delivery expense |
23,228 | 23,791 | ||||||
| Depreciation and amortization | 3,291 | 3,070 | ||||||
| Adjusted gross profit (non-GAAP measure presented) |
$ | 78,952 | $ | 103,856 | ||||
FINANCIAL CONDITION, LIQUIDITY AND SOURCES OF CAPITAL
The Company's current ratio was 4.3 and 3.1 at March 31, 2025 and 2024, respectively. Working capital was approximately $128.1 million at March 31, 2025 and $116.0 million at March 31, 2024.
During the year ended March 31, 2025, the Company maintained assets and liabilities at levels it believed were commensurate with operations. Changes in balance sheet amounts occurred in the ordinary course of business. Cash and restricted cash decreased due to cash used in operating activities and investing activities exceeding cash provided by financing activities. The Company expects to continue to monitor, evaluate and manage balance sheet components depending on changes in market conditions and the Company’s operations.
The Company has a $150 million asset-based lending facility ("ABL Facility") in place with JPMorgan Chase Bank, N.A. as the arranging agent and BMO Harris Bank, N.A. as a one-third syndicated participant. On May 6, 2025, the Company executed the fourth amendment to the credit agreement which extended the maturity date of the ABL Facility to August 19, 2026. The ABL Facility is secured by substantially all of the assets of the Company. The Company can elect borrowings on a floating rate basis or a term basis. Floating rate borrowings accrue interest at a rate equal to the prime rate minus 1% per annum. Term rate borrowings accrue interest at a rate equal to the SOFR rate applicable to the selected term plus 1.8% per annum. Availability of funds under the ABL Facility is subject to a borrowing base calculation determined as the sum of (a) 90% of eligible accounts receivable, plus (b) the product of 85% multiplied by the net orderly liquidating value percentage identified in the most recent inventory appraisal multiplied by eligible inventory. The ABL Facility contains a springing financial covenant whereby the financial covenant is only tested when availability falls below the greater of 15% of the revolving commitment or $22.5 million. The financial covenant restricts the Company from allowing its fixed charge coverage ratio to be, as of the end of any calendar month, less than 1.10 to 1.00 for the trailing twelve-month period then ending. The fixed charge coverage ratio is calculated as the ratio of (a) EBITDA, as defined in the ABL Facility, minus unfinanced capital expenditures to (b) cash interest expense plus scheduled principal payments on indebtedness plus taxes paid in cash plus restricted payments paid in cash plus capital lease obligation payments plus cash contributions to any employee pension benefit plans. The ABL Facility contains other representations and warranties and affirmative and negative covenants that are usual and customary. If certain conditions precedent are satisfied, the ABL facility may be increased by up to an aggregate of $25 million, in minimum increments of $5 million. At March 31, 2025, the Company had a balance of approximately $47.7 million under the ABL Facility with an applicable interest rate of 6.5%. At March 31, 2025, the Company's applicable borrowing base calculation supported access to approximately $114.0 million of the ABL Facility. As of the filing date of this Form 10-K, the Company had borrowings of approximately $34.2 million outstanding under the ABL Facility and the Company's most recent borrowing base calculation provided access to approximately $112.3 million of the ABL Facility.
The Company believes that its current cash position along with cash flows from operations and borrowing capability due to its financial position are adequate to fund its expected cash requirements for the next 12 months.
HEDGING ACTIVITIES
The Company utilizes hot-rolled coil futures to manage price risk on unsold inventory and longer-term fixed price sales agreements. The Company has elected hedge accounting for some of its hedging activities previously but most recently the Company has classified its hedging activities as economic hedges of risk with mark-to-market ("MTM") accounting treatment. Hedging decisions are intended to protect the value of the Company's inventory and produce more consistent financial results over price cycles. The Company recognized a loss related to futures designated for hedge accounting of approximately $0.4 million for fiscal 2024 with all of this recognition occurring during the first fiscal quarter ended June 30, 2023. The Company recognized gains related to economic hedges of risk of approximately $7.6 million and $1.8 million during fiscal 2025 and fiscal 2024, respectively. With MTM accounting treatment it is possible that hedging related gains or losses might be recognized in a different fiscal quarter or fiscal year than the corresponding improvement or contraction in our physical margins. See Note 6 for additional information related to the Company's hedging activities.
OUTLOOK
For the first quarter of fiscal 2026, the Company expects sales volume to be slightly lower than the sales volume for the fourth quarter of fiscal 2025 due primarily to equipment downtime encountered during the quarter. The Company expects improved margins for the first quarter of fiscal 2026 compared to the fourth quarter of fiscal 2025.
OFF-BALANCE SHEET ARRANGEMENTS
The Company has no off-balance sheet arrangements.
INFLATION
During fiscal 2025 and fiscal 2024, the Company believes that the general level of inflation did not have a material effect on the Company's operations.
CRITICAL ACCOUNTING ESTIMATES
The preparation of financial statements in conformity with U.S. generally accepted accounting principles may require management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. Actual results could differ from any estimates. The Company did not identify any significant estimates or judgements related to the consolidated financial statements and accompanying notes presented in this annual report.
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS
From time to time, the Company may make certain statements that contain forward-looking information (as defined in the Private Securities Litigation Reform Act of 1996, as amended) and that involve risk and uncertainty. Such statements may include those risks disclosed in the Management’s Discussion and Analysis of Financial Condition and Results of Operations section of this report. These forward-looking statements may include, but are not limited to, future changes in the Company’s financial condition or results of operations, future production capacity, product quality and proposed expansion plans. Forward-looking statements may be made by management orally or in writing including, but not limited to, this Management’s Discussion and Analysis of Financial Condition and Results of Operations and other sections of the Company’s filings with the SEC under the Securities Act of 1933, as amended, and the Securities Exchange Act of 1934, as amended (the “Exchange Act”), including the Company’s Annual Report on Form 10-K and its other Quarterly Reports on Form 10-Q. Forward-looking statements include those preceded by, followed by or including the words “will,” “expect,” “intended,” “anticipated,” “believe,” “project,” “forecast,” “propose,” “plan,” “estimate,” “enable,” and similar expressions, including, for example, statements about our business strategy, our industry, our future profitability, growth in the industry sectors we serve, our expectations, beliefs, plans, strategies, objectives, prospects and assumptions, and estimates and projections of future activity. These forward-looking statements are not guarantees of future performance. These statements are based on management’s expectations that involve a number of business risks and uncertainties, any of which could cause actual results to differ materially from those expressed in or implied by the forward-looking statements. Although forward-looking statements reflect our current beliefs, reliance should not be placed on forward-looking statements because they involve known and unknown risks, uncertainties and other factors, which may cause our actual results, performance or achievements to differ materially from anticipated future results, performance or achievements expressed or implied by such forward-looking statements. Actual results and trends in the future may differ materially depending on a variety of factors including, but not limited to, changes in the demand for and prices of the Company’s products, changes in government policy regarding steel, changes in the demand for steel and steel products in general and the Company’s success in executing its internal operating plans, changes in and availability of raw materials, unplanned shutdowns of our production facilities due to equipment failures or other issues, increased competition from alternative materials and risks concerning innovation, new technologies, products and increasing customer requirements. Accordingly, undue reliance should not be placed on our forward-looking statements. We undertake no obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events, changed circumstances or otherwise, except to the extent law requires.
TEN YEAR FINANCIAL SUMMARY (Unaudited)
(In thousands, except for share, per share and percentage data)
| Year Ended March 31 |
||||||||||||||||||||||||||||||||||||||||
| 2018 | ||||||||||||||||||||||||||||||||||||||||
| 2025 |
2024 |
2023 |
2022 |
2021 | 2020 | 2019 | As Adjusted | 2017* | 2016* | |||||||||||||||||||||||||||||||
| Net sales |
$ | 444,600 | $ | 516,251 | $ | 547,542 | $ | 285,235 | $ | 126,103 | $ | 142,102 | $ | 187,154 | $ | 121,157 | $ | 77,756 | $ | 81,631 | ||||||||||||||||||||
| Net earnings (loss) |
$ | 6,085 | $ | 17,345 | $ | 21,344 | $ | 14,066 | $ | 11,424 | $ | (5,249 | ) | $ | 5,100 | $ | 3,934 | $ | (2,679 | ) | $ | 294 | ||||||||||||||||||
| Current assets |
$ | 166,467 | $ | 170,064 | $ | 143,656 | $ | 125,362 | $ | 77,535 | $ | 65,212 | $ | 74,456 | $ | 67,269 | $ | 45,433 | $ | 49,702 | ||||||||||||||||||||
| Current liabilities |
$ | 38,324 | $ | 54,107 | $ | 45,088 | $ | 60,811 | $ | 29,072 | $ | 9,645 | $ | 12,365 | $ | 11,031 | $ | 2,357 | $ | 2,866 | ||||||||||||||||||||
| Working capital |
$ | 128,143 | $ | 115,957 | $ | 98,568 | $ | 64,551 | $ | 48,462 | $ | 55,566 | $ | 62,091 | $ | 56,239 | $ | 43,076 | $ | 46,836 | ||||||||||||||||||||
| Total assets |
$ | 226,822 | $ | 230,019 | $ | 199,312 | $ | 159,275 | $ | 95,009 | $ | 77,344 | $ | 86,602 | $ | 81,653 | $ | 63,263 | $ | 66,890 | ||||||||||||||||||||
| Stockholders’ equity |
$ | 132,425 | $ | 127,475 | $ | 115,432 | $ | 79,687 | $ | 65,340 | $ | 66,865 | $ | 72,482 | $ | 68,575 | $ | 60,356 | $ | 63,239 | ||||||||||||||||||||
| Net earnings (loss) as a percentage of Net sales |
1.4 | 3.4 | 3.9 | 4.9 | 9.1 | (3.7 | ) | 2.7 | 3.2 | (3.4 | ) | 0.4 | ||||||||||||||||||||||||||||
| Weighted average number of common shares outstanding: |
||||||||||||||||||||||||||||||||||||||||
| Basic |
6,944,602 | 7,183,702 | 7,216,142 | 6,623,769 | 7,027,707 | 7,000,403 | 7,010,266 | 7,009,444 | 6,851,944 | 6,799,444 | ||||||||||||||||||||||||||||||
| Per share |
||||||||||||||||||||||||||||||||||||||||
| Net earnings (loss) per share: |
||||||||||||||||||||||||||||||||||||||||
| Basic |
$ | 0.87 | $ | 2.39 | $ | 2.91 | $ | 2.04 | $ | 1.63 | $ | (0.75 | ) | $ | 0.73 | $ | 0.56 | $ | (0.39 | ) | $ | 0.04 | ||||||||||||||||||
| Cash dividends per common share |
$ | 0.16 | $ | 0.10 | $ | 0.08 | $ | 0.08 | $ | 0.08 | $ | 0.10 | $ | 0.19 | $ | 0.05 | $ | 0.04 | $ | 0.04 | ||||||||||||||||||||
* The figures for fiscal years 2016 and 2017 have not been adjusted for a change in accounting principle where the Company changed its valuation method for prime coil inventory from the LIFO method to the average cost method. The change in accounting principle was effective for fiscal 2019 and fiscal 2018 figures were adjusted to meet comparative financial statement reporting requirements. The impact of the change in accounting principle on fiscal years 2016 and 2017 has not been quantified by the Company and could be material, therefore, the figures may not be comparable to fiscal years 2018 to 2025.