As filed with the Securities and Exchange Commission on April 17, 2024

Registration No. 333-276981

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

Amendment No. 1
to
FORM S-1
REGISTRATION STATEMENT
UNDER
THE SECURITIES ACT OF 1933

Dror Ortho-Design, Inc.

(Exact name of registrant as specified in its charter)

Shatner Street 3
Jerusalem, Israel
+972 (0)74-700-6700
(Address, including zip code, and telephone number, including area code, of registrant’s principal executive offices)

Mr. Eliyahu (Lee) Haddad
Chief Executive Officer
Shatner Street 3
Jerusalem, Israel
+972 (0)74-700-6700
(Name, address, including zip code, and telephone number, including area code, of agent for service)

Rick Werner
Alla Digilova
Haynes and Boone, LLP
30 Rockefeller Plaza, 26th Floor

New York, NY 10112
Tel. (212) 659-7300
Fax (212) 884-8234

Approximate date of commencement of proposed sale to the public: From time to time after this Registration Statement becomes effective.

If any of the securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933 check the following box:  ☒

If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.

Indicate by check mark whether the registrant is a large, accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large, accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 7(a)(2)(B) of the Securities Act.  ☐

The registrant hereby amends this registration statement on such date or dates as may be necessary to delay its effective date until the registrant shall file a further amendment which specifically states that this registration statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933 or until this registration statement shall become effective on such date as the SEC, acting pursuant to said Section 8(a), may determine. 

The information in this preliminary prospectus is not complete and may be changed. These securities may not be sold until the registration statement filed with the U.S. Securities and Exchange Commission is effective. This preliminary prospectus is not an offer to sell these securities and does not constitute the solicitation of offers to buy these securities in any jurisdiction where the offer or sale is not permitted.

SUBJECT TO COMPLETION, DATED April 17, 2024

Preliminary Prospectus

DROR ORTHO-DESIGN, INC.

293,145,818 Shares of Common Stock

1,046,336,224 Shares of Common Stock Underlying Series A Convertible Preferred Stock

474,999,993 Shares of Common Stock Underlying Private Placement Warrants

489,834,426 Shares of Common Stock Underlying Share Exchange Warrants

This prospectus relates to the offer and sale, from time to time, by the selling securityholders named in this prospectus or their permitted transferees (the “Selling Securityholders”) of 2,304,316,461 shares of common stock, par value $0.0001 per share (“Common Stock”), of Dror Ortho-Design, Inc., a Delaware corporation (“Dror” “the Company,” “we”, “us” or “our”), consisting of (A) 293,145,818 shares of Common Stock, including shares of Common Stock issued to investors in the Private Placement (as defined herein) (the “Private Placement Shares”) and to former shareholders of Private Dror (as defined herein) in connection with the Share Exchange (as defined herein); (B) 1,046,336,224 shares of Common Stock (the “Conversion Shares”) issuable upon the conversion of shares of Series A Convertible Preferred Stock, par value $0.0001 per share (the “Series A Preferred Stock”) issued to investors in the Private Placement and to former shareholders of Private Dror in connection with the Share Exchange; (C) 474,999,993 shares of Common Stock (the “Private Placement Warrant Shares”) issuable upon exercise of the Private Placement Warrants (as defined herein) issued to investors in the Private Placement; and (D) 489,834,426 shares of Common Stock (the “Share Exchange Warrant Shares”) issuable upon exercise of the Share Exchange Warrants (as defined herein) issued to former warrant holders of Private Dror in connection with the Warrant Exchange (as defined herein).

The shares of Common Stock, including the Private Placement Shares, the shares of Series A Preferred Stock and the Warrants were issued in reliance upon the exemption from the registration requirements in Section 4(a)(2) of the Securities Act of 1933, as amended (the “Securities Act”) and Regulation D promulgated thereunder.

On July 5, 2023, the Company (f/k/a Novint Technologies, Inc.) entered into a share exchange agreement with the shareholders of Dror Ortho-Design Ltd. (“Private Dror”), pursuant to which the shareholders of Private Dror agreed to exchange all of their outstanding ordinary shares of Private Dror for shares of the Company’s Common Stock and Series A Preferred Stock (the “Share Exchange”). On August 14, 2023, the Share Exchange was consummated, and the Company changed its name to “Dror Ortho-Design, Inc.” Following the Share Exchange, the Company succeeded to the business of Private Dror as its sole line of business.

In connection with the Share Exchange, pursuant to a Purchase Agreement (as defined herein), the Company sold shares of Common Stock and Series A Preferred Stock and Private Placement Warrants (as defined herein) in a private placement (the “Private Placement”) to certain investors (collectively, the “Private Placement Investors”) in a closing on August 14, 2023, and in a subsequent closing on September 13, 2023.

The holders of Series A Preferred Stock are entitled to any dividends, on an as-if converted basis, equal to and in the same form as any dividends actually paid on shares of Common Stock, when and if actually paid. The shares of Series A Preferred Stock are entitled to vote with holders of the Common Stock on all matters that such holders of Common Stock are entitled to vote upon, in the same manner and with the same effect as the holders of Common Stock, voting together with the holders of Common Stock as a single class. Each share of Series A Preferred Stock shall entitle the holder thereof to cast that number of votes per share of Series A Preferred Stock equal to the number of Conversion Shares into which such share of Series A Preferred Stock is convertible into pursuant to the Certificate of Designation of the Series A Preferred Stock (after giving effect to any applicable limitation on conversion under such Certificate of Designation).

We are registering the resale of the shares of Common Stock covered by this prospectus in order to satisfy the requirements of the Registration Rights Agreement, dated August 14, 2023, by and among the Company and the Private Placement Investors (the “Registration Rights Agreement”). The Selling Securityholders will receive all of the proceeds from any sales of the shares offered hereby. We will not receive any of the proceeds, but we will incur expenses in connection with the offering. To the extent the Warrants are exercised for cash, if at all, we will receive the exercise price of the Warrants. We intend to use those proceeds, if any, for general corporate purposes.

Our registration of the shares of Common Stock covered by this prospectus does not mean that the Selling Securityholders will offer or sell any of such shares of Common Stock. The Selling Securityholders named in this prospectus, or their donees, pledgees, transferees or other successors-in-interest, may resell the shares of Common Stock covered by this prospectus through public or private transactions at a fixed price of $0.011 per share until our common stock is listed or quoted an existing public trading market, such as OTC Market Group, Inc.’s “OTCQB” or “OTCQX” market, and thereafter at prevailing market prices or privately negotiated prices. For additional information on the possible methods of sale that may be used by the Selling Securityholders, you should refer to the section of this prospectus entitled “Plan of Distribution.”

Any shares of Common Stock subject to resale hereunder will have been issued by us and acquired by the Selling Securityholders prior to any resale of such shares pursuant to this prospectus.

No underwriter or other person has been engaged to facilitate the sale of the Common Stock in this offering. We will bear all costs, expenses and fees in connection with the registration of the Common Stock. The Selling Securityholders will bear all commissions and discounts, if any, attributable to their respective sales of the Common Stock.

We will bear all costs, expenses and fees in connection with the registration of the shares of Common Stock. The Selling Securityholders will bear all commissions and discounts, if any, attributable to their respective sales of the shares of Common Stock.

Our Common Stock is currently approved for quotation on the OTC Pink Market under the symbol “DROR.” On April 12, 2024, the last reported sales price for our Common Stock was $0.005 per share.

Investment in our Common Stock involves risk. See “Risk Factors” beginning on page 6 of this prospectus, in our periodic reports filed from time to time with the Securities and Exchange Commission. You should carefully read this prospectus before you invest in our Common Stock.

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

The date of this prospectus is                     .

Table Of Contents

You should rely only on the information contained in this prospectus. No one has been authorized to provide you with information that is different from that contained in this prospectus. This prospectus is dated as of the date set forth on the cover hereof. You should not assume that the information contained in this prospectus is accurate as of any date other than that date.

For investors outside of the United States: We have not done anything that would permit this offering or possession or distribution of this prospectus in any jurisdiction where action for that purpose is required, other than in the United States. Persons outside the United States who come into possession of this prospectus must inform themselves about, and observe any restrictions relating to, the offering of our securities and the distribution of this prospectus outside the United States.

This document contains references to trademarks and service marks belonging to other entities. Solely for convenience, trademarks and trade names referred to in this prospectus may appear without the ^® or ™ symbols, but such references are not intended to indicate, in any way, that the applicable licensor will not assert, to the fullest extent under applicable law, its rights to these trademarks and trade names. Dror does not intend its use or display of other companies’ trade names, trademarks or service marks to imply a relationship with, or endorsement or sponsorship of Dror by, any other companies.

Notwithstanding references thereto in this prospectus, Dror’s website is not part of and is not incorporated in the prospectus, and you should not consider information found on Dror’s website to be part of this prospectus.

Frequently Used Terms

“2021 Plan” means the Dror Ortho-Design Ltd. 2021 Share Incentive Plan.

“2023 Plan” means the Dror Ortho-Design, Inc. 2023 Long-Term Incentive Plan.

“Amended Charter” means the Company’s certificate of incorporation, as amended from time to time.

“Board” means the Company’s Board of Directors.

“Bylaws” means the Company’s Second Amended and Restated By-Laws.

“Closing” means August 14, 2023, the closing date of the Private Placement and the Share Exchange.

“Common Stock” means the shares of common stock of Dror Ortho-Design, Inc., par value $0.0001 per share, and any other class of securities into which such securities may hereafter be reclassified or changed.

“December 2021 Transaction” means the sale and issuance by Private Dror, pursuant to a Share Purchase Agreement entered into on December 6, 2021, of a total of 77,873 of Private Dror’s Preferred A-5 Shares, against an aggregated investment amount of $3,150,000 ($150,000 of which was provided prior to the financing in the form of a convertible security).

“Dror” means Dror Ortho-Design, Inc. (formerly known as Novint Technologies, Inc.), a Delaware corporation.

“Exchange Act” means the U.S. Securities Exchange Act of 1934, as amended, and the rules and regulations promulgated thereunder.

“Novint” means Novint Technologies, Inc., a Delaware corporation (which was renamed “Dror Ortho-Design, Inc.” in connection with the Share Exchange).

“Private Dror” means Dror Ortho-Design Ltd., a company incorporated under the laws of the State of Israel, and wholly owned subsidiary of Dror pursuant to the consummation of the Share Exchange.

“Private Placement Shares” means the shares of Common Stock issued in connection with the Purchase Agreement.

“Private Placement Warrants” means the warrants issued in connection with the Purchase Agreement.

“Private Placement Warrant Shares” means the shares of Common Stock issuable upon exercise of the Private Placement Warrants.

“Purchase Agreement” means that certain Securities Purchase Agreement, by and among Novint and each of the purchasers thereto, dated August 14, 2023.

“Registration Rights Agreement” means that certain Registration Rights Agreement, by and among Novint and each of the purchaser signatories to the Purchase Agreement, dated August 14, 2023.

“SEC” means the U.S. Securities and Exchange Commission.

“Securities Act” means the U.S. Securities Act of 1933, as amended, and the rules and regulations promulgated thereunder.

“Series A Preferred Stock” or “Preferred Stock” means the shares of Series A Convertible Preferred Stock of Dror Ortho-Design, Inc., par value $0.0001 per share, and any other class of securities into which such securities may hereafter be reclassified or changed.

“Share Exchange” means the transfer of 235,088 ordinary shares of Private Dror to Dror in exchange for 7,576,999 shares of Series A Convertible Preferred Stock and 106,782,187 shares of Common Stock pursuant to the Share Exchange Agreement.

“Share Exchange Agreement” means that certain Share Exchange Agreement, dated July 5, 2023, by and among the Company, Private Dror, and the shareholders of Private Dror, as amended on August 14, 2023.

“Share Exchange Warrants” means the warrants issued pursuant to the Share Exchange Agreement.

“Share Exchange Warrant Shares” means the shares of Common Stock issuable upon exercise of the Share Exchange Warrants.

“Warrants” means, collectively, the Share Exchange Warrants and the Private Placement Warrants.

“Warrant Exchange” means the transfer of Series A-4 Warrants to purchase ordinary shares of Private Dror to Dror in exchange for the Share Exchange Warrants.

“Warrant Shares” means, collectively, the Share Exchange Warrant Shares and the Private Placement Warrant Shares.

About this Prospectus

This prospectus is part of a registration statement on Form S-1 that we filed with the Securities and Exchange Commission (the “SEC”) using the “shelf” registration process. Under this shelf registration process, the Selling Securityholders may, from time to time, sell the securities offered by them described in this prospectus. We will not receive any proceeds from the sale by such Selling Securityholders of the securities offered by them described in this prospectus. This prospectus also relates to the issuance by us of the shares of Common Stock issuable upon the exercise of any Warrants. We will receive proceeds from any exercise of the Warrants for cash.

This prospectus includes important information about us, the securities being offered and other information you should know before investing in our securities. It is important for you to read and consider all information contained in this prospectus in making your investment decision. You should also read and consider the information in the documents to which we have referred you under “Where You Can Find More Information” in this prospectus.

Neither we nor the Selling Securityholders have authorized anyone to provide you with any information other than that provided in this prospectus. Neither we nor the Selling Securityholders can provide any assurance as to the reliability of any other information that others may give you. Neither we nor the Selling Securityholders are making an offer of these securities in any jurisdiction where the offer is not permitted. You should not assume that the information in this prospectus is accurate as of any date other than the date of the applicable document. Since the date of this prospectus our business, financial condition, results of operations and prospects may have changed.

Unless the context indicates otherwise, references in this prospectus to the “Company,” “Dror,” “we,” “us,” “our” and similar terms refer to Dror Ortho-Design, Inc., a Delaware corporation, and any subsidiaries. Note that references in this prospectus to Dror’s development pipeline may omit certain programs that are not material to Dror individually or in the aggregate.

Cautionary Note Regarding Forward-Looking Statements

Statements in this prospectus and other written reports made from time to time by us that are not historical facts, including statements regarding our strategy, future operations, future financial position, future revenue, projected costs, prospects, plans, objectives of management and expected market growth, constitute so-called “forward-looking statements,” all of which are subject to risks and uncertainties. Forward-looking statements can be identified by the use of words such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “potential,” “predict,” “project,” “should,” “target,” “will,” “would,” and other words of similar meaning, although not all forward-looking statements contain these identifying words. Forward-looking statements are likely to address our estimates of our expenses, ongoing losses, future revenue, capital requirements and our needs for or ability to obtain additional financing; our ability to retain and recruit key personnel; our financial performance; our ability to become profitable and generate consistent cash flows to remain profitable; our ability to fund our working capital requirements; developments and projections relating to our competitors or our industry; and our Platform (as defined below) and any other products, among other things. You should carefully consider any such statement and should understand that many factors could cause actual results to differ from our forward-looking statements. Such risks and uncertainties include but are not limited to the following:

These factors may include inaccurate assumptions and a broad variety of other risks and uncertainties, including some that are known and some that are not. No forward-looking statement can be guaranteed, and actual future results may vary materially. Information regarding market and industry statistics contained in this prospectus is included based on information available to us that we believe is accurate. It is generally based on industry and other publications that are not produced for purposes of securities offerings or economic analysis. We have not reviewed or included data from all sources and cannot assure investors of the accuracy or completeness of the data included in this prospectus. Forecasts and other forward-looking information obtained from these sources are subject to the same qualifications and the additional uncertainties accompanying any estimates of future market size, revenue and market acceptance of products and services. We do not assume any obligation to update any forward-looking statement. As a result, investors should not place undue reliance on these forward-looking statements.

These forward-looking statements are based on information available as of the date of this prospectus and current expectations, forecasts and assumptions, and involve a number of judgments, risks and uncertainties. Accordingly, forward-looking statements should not be relied upon as representing our views as of any subsequent date, and we do not undertake any obligation to update forward-looking statements to reflect events or circumstances after the date they were made, whether as a result of new information, future events or otherwise, except as may be required under applicable securities laws.

Market And Industry Data

Certain industry data and market data included in this prospectus were obtained from independent third-party surveys, market research, publicly available information, reports of governmental agencies and industry publications and surveys. All of management’s estimates presented herein are based upon management’s review of independent third-party surveys and industry publications prepared by a number of sources and other publicly available information. All of the market data used in this prospectus involves a number of assumptions and limitations, and you are cautioned not to give undue weight to such estimates. We believe that the information from these industry publications and surveys included in this prospectus is reliable. The industry in which we operate is subject to a high degree of uncertainty and risk due to a variety of factors, including those described in the section titled “Risk Factors.” These and other factors could cause results to differ materially from those expressed in the estimates made by the independent parties and by us.

Risk Factors

Investing in our securities involves a high degree of risk. Before you make a decision to buy our securities, in addition to the risks and uncertainties discussed above under “Cautionary Note Regarding Forward-Looking Statements,” you should carefully consider the risks and uncertainties described below together with all of the other information contained in this prospectus, including our financial statements and related notes appearing at the end of this prospectus and in the section titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” before deciding to invest in our securities. If any of the events or developments described below were to occur, our business, prospects, operating results, and financial condition could suffer materially, the price at which our securities are quoted could decline, and you could lose all or part of your investment. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently believe to be immaterial may also adversely affect our business.

Risks Related to Our Capital Requirements and Financing

Our financial statements have been prepared on a going concern basis; we must raise additional capital to fund our operations in order to continue as a going concern.

In its report dated April 1, 2024, Barzily & Co., our independent registered public accounting firm, expressed substantial doubt about our ability to continue as a going concern as we have suffered recurring losses from operations and have insufficient liquidity to fund our future operations. If we are unable to improve our liquidity position, we may not be able to continue as a going concern. The accompanying financial statements do not include any adjustments that might result if we are unable to continue as a going concern and, therefore, be required to realize our assets and discharge our liabilities other than in the normal course of business which could cause investors to suffer the loss of all or a substantial portion of their investment. As of December 31, 2023, we had approximately $3.3 million of cash. In order to have sufficient cash to fund our operations in the future, we will need to raise additional equity or debt capital and cannot provide any assurance that we will be successful in doing so. If are unable to raise sufficient capital to fund our operations, we may need to delay, reduce or eliminate certain research and development programs or other operations, sell some or all of our assets or merge with another entity.

Macroeconomic and External Risks

We conduct our operations in Israel. Conditions in Israel, including the recent attack by Hamas and other terrorist organizations from the Gaza Strip and Israel’s war against them, may affect our operations.

Because our wholly-owned subsidiary is incorporated under the laws of the state of Israel, all of our operations are conducted in Israel, and all of our employees and management personnel are located in Israel, our business and operations are directly affected by economic, political, geopolitical and military conditions in Israel. Since the establishment of the State of Israel in 1948, a number of armed conflicts have occurred between Israel and its neighboring countries and terrorist organizations active in the region. These conflicts have involved missile strikes, hostile infiltrations and terrorism against civilian targets in various parts of Israel, which have negatively affected business conditions in Israel.

In October 2023, Hamas terrorists infiltrated Israel’s southern border from the Gaza Strip and conducted a series of attacks on civilian and military targets. Hamas also launched extensive rocket attacks on Israeli population and industrial centers located along Israel’s border with the Gaza Strip and in other areas within the State of Israel. Following the attack, Israel’s security cabinet declared war against Hamas and a military campaign against these terrorist organizations commenced in parallel to their continued rocket and terror attacks. Moreover, the clash between Israel and Hezbollah in Lebanon may escalate in the future into a greater regional conflict.

Any hostilities involving Israel, or the interruption or curtailment of trade within Israel or between Israel and its trading partners could adversely affect our operations and results of operations and could make it more difficult for us to raise capital. Parties with whom we may do business have sometimes declined to travel to Israel during periods of heightened unrest or tension, forcing us to make alternative arrangements when necessary. The conflict situation in Israel could cause situations where medical product certifying or auditing bodies could not be able to visit manufacturing facilities of our subcontractors in Israel in order to review our certifications or clearances, thus possibly leading to temporary suspensions or even cancellations of our product clearances or certifications. The conflict situation in Israel could also result in parties with whom we have agreements involving performance in Israel claiming that they are not obligated to perform their commitments under those agreements pursuant to force majeure provisions in such agreements.

There have been travel advisories imposed as related to travel to Israel, and restriction on travel, or delays and disruptions as related to imports and exports may be imposed in the future. An inability to receive supplies and materials, shortages of materials or difficulties in procuring our materials, among others, may adversely impact our ability to commercialize and manufacture our product candidates and products in a timely manner. This could cause a number of delays and/or issues for our operations, including delay of the review of our product candidates by regulatory agencies, which in turn would have a material adverse impact on our ability to commercialize our product candidates.

The Israel Defense Force (the “IDF”), the national military of Israel, is a conscripted military service, subject to certain exceptions. Several employees of our vendors are subject to military service in the IDF and have been and may be called to serve. It is possible that there will be further military reserve duty call-ups in the future, which may affect our business due to a shortage of skilled labor and loss of institutional knowledge, and necessary mitigation measures we may take to respond to a decrease in labor availability, such as overtime and third-party outsourcing, for example, which may have unintended negative effects and adversely impact our results of operations, liquidity or cash flows.

It is currently not possible to predict the duration or severity of the ongoing conflict or its effects on our business, operations and financial conditions. The ongoing conflict is rapidly evolving and developing, and could disrupt our business and operations, interrupt our sources and availability of supply and hamper our ability to raise additional funds or sell our securities, among others.

Service of process upon and enforcing a United States or U.S. judgment against us and our current executive officers and directors, or asserting U.S. securities law claims in Israel, may be difficult.

We are incorporated under the laws of the State of Delaware, however our principal place of business is in Jerusalem, Israel. Service of process upon us and upon our directors and officers and any Israeli experts named herein, all of whom reside outside of the United States, may be difficult from within the United States. Furthermore, because a majority of our assets and all of our directors, officers and such Israeli experts are located outside of the United States, any judgment obtained in the United States against us or any of them may be difficult to collect within the United States and may not be enforced by an Israeli court.

It may be difficult to assert U.S. securities laws claims in original actions instituted in Israel. Israeli courts may refuse to hear a claim based on an alleged violation of U.S. securities laws on the basis that Israel is not the most appropriate forum in which to bring such a claim. In addition, even if an Israeli court agrees to hear a claim, it may determine that Israeli law and not U.S. law is applicable to the claim. There is little binding case law in Israel addressing these matters. If U.S. law is found to be applicable, the content of applicable U.S. law must be proven as a fact, which can be a time-consuming and costly process. Certain matters of procedure may also be governed by Israeli law. As a result of the difficulty associated with enforcing a judgment against us in Israel, you may not be able to collect any damages awarded by either a U.S. or foreign court.

Our operations and financial performance depend on global and regional economic conditions. Inflation, fluctuations in currency exchange rates, changes in consumer confidence and demand, and weakness in general economic conditions and threats, or actual recessions, could materially affect our business, results of operations, and financial condition.

Macroeconomic conditions impact consumer confidence and discretionary spending, which could adversely affect demand for any products we bring to market. Consumer spending habits are affected by, among other things, inflation, fluctuations in currency exchange rates, weakness in general economic conditions, threats or actual recessions, pandemics, wars and military actions, levels of employment, wages, debt obligations, discretionary income, interest rates, volatility in capital, and consumer confidence and perceptions of current and future economic conditions. Changes and uncertainty can, among other things, reduce or shift spending away from elective treatments and procedures, drive patients to purchase orthodontic treatments that may cost less than our treatment options, result in a decrease in the number of overall orthodontic and dental case starts, reduce patient traffic in dentists’ offices or reduce demand for dental services generally. Further, decreased demand for dental services can cause dentists and labs to postpone investments in capital equipment, such as intraoral scanners and CAD/CAM equipment and software. The recent declines in, or uncertain economic outlooks for, the U.S., European and certain other international economies has and may continue to adversely affect consumer and dental practice spending. The increase in the cost of fuel and energy, food and other essential items along with climbing interest rates could reduce consumers’ disposable income, resulting in less discretionary spending for products like ours. Decreases in disposable income and discretionary spending or change in consumer confidence and spending habits may adversely affect our revenues and operating results.

Inflation continues to adversely impact spending and trade activities and we are unable to predict the impacts of higher inflation on global and regional economies. Higher inflation has also increased domestic and international shipping costs, raw material prices, and labor rates, which could adversely impact the costs of producing, procuring and shipping any products we bring to market. If similar trends continue once we begin marketing our Platform, our ability to recover these cost increases through price increases may have limited effectiveness, resulting in downward pressure on our operating results. Attempts to offset cost increases with price increases could reduce sales, increase customer dissatisfaction or otherwise harm our reputation. Further, we are unable to predict the impact of efforts by central banks and federal, state and local governments to combat elevated levels of inflation. If their efforts to reduce inflation are too aggressive, they may lead to a recession. Alternatively, if they are insufficient or are not sustained long enough to lower inflation to more acceptable levels, consumer spending may be adversely impacted for a prolonged period of time. Any of these events could materially affect our business and operating results.

Our business could be impacted by major public health issues, including pandemics such as the spread of COVID-19.

Major public health issues, including pandemics such as the spread of COVID-19, could in the future materially affect our business due to their impact on the global economy and regional economies, demand for consumer products, the imposition or removal of public safety measures. Public health concerns may also limit the movement of products between regions, disrupt or delay supply chains and sales and distribution channels, resulting in interruptions of the supply of products.

COVID-19 has created significant, widespread and unprecedented volatility, uncertainty, and economic instability, disrupting broad aspects of global and regional economies. Many of these effects continue to varying degree as variants of COVID-19 and outbreaks globally or regionally continue to harm recovering consumer confidence. As a result of outbreaks of COVID-19 and its variants, consumer demand and doctor availability has been inconsistent and difficult to predict. The effects of the pandemic continue to linger and evolve and we cannot predict future direct and ancillary impacts on our business or results of operations, although they may be material to our business as well as economic activity generally.

Our business could be impacted by political events, trade and other international disputes, war, and terrorism, including the military conflict between Russia and Ukraine.

Political events, trade and other international disputes, war, and terrorism could harm or disrupt international commerce and the global economy and could have a material effect on our business as well as our potential customers, suppliers, contract manufacturers, distributors, and other business partners.

Political events, trade and other international disputes, wars, and terrorism can lead to unexpected tariffs or trade restrictions, which could adversely impact our business. Tariffs could increase the cost of our products and the components and raw materials to make them. Once we begin marketing our products, these increased costs could adversely impact our gross margin and make our products less competitive or reduce demand. Countries could also adopt other measures, such as controls on imports or exports of goods, technology or data, that could adversely impact our operations and supply chain and limit our ability to offer products and services. These measures could require us to take various actions, including changing suppliers or restructuring business relationships. Complying with new or changed trade restrictions is expensive, time-consuming and disruptive to our operations. Such restrictions can be announced with little or no advance notice and we may be unable to effectively mitigate the adverse impacts of such measures. If disputes and conflicts escalate in the future, actions by governments in response could be significantly more severe and restrictive and could materially affect our business.

Political unrest, threats, tensions, actions and responses to any social, economic, business, geopolitical, military, terrorism, or acts of war involving key commercial, development or manufacturing markets such as China, Mexico, Israel, Europe, or other countries could materially impact any international operations we undertake. For example, our employees in Israel could be obligated to perform annual reserve duty in the Israeli military and be called for additional active duty under emergency circumstances. If any of these events or conditions occur, the impact on us, our employees and potential customers is uncertain, particularly if emergency circumstances, armed conflicts or an escalation in political instability or violence disrupts our product development, data or information exchange, payroll or banking operations, product or materials shipping by us or our suppliers and other unanticipated business disruptions, interruptions and limitations in telecommunication services or critical systems or applications reliant on a stable and uninterrupted communications infrastructure.

U.S. and global markets are experiencing volatility and disruption following the escalation of geopolitical tensions and the start of the military conflict between Russia and Ukraine. On February 24, 2022, a full-scale military invasion of Ukraine by Russian troops was reported. In response to the military conflict, the United States and other North Atlantic Treaty Organization member states, as well as non-member states, announced targeted economic sanctions on Russia, including certain Russian citizens and enterprises, and the continuation of the conflict may trigger additional economic and other sanctions. The potential impacts of the conflict and related sanctions could include supply chain and logistics disruptions, macro financial impacts resulting from the exclusion of Russian financial institutions from the global banking system, volatility in foreign exchange rates and interest rates, inflationary pressures on raw materials and energy and heightened cybersecurity threats. We have no way to predict the progress or outcome of the conflict in Ukraine or the reactions by governments, businesses or consumers. A prolonged conflict, intensified military activities or more extensive sanctions impacting the region and the resulting economic impact could have a material effect on our business, results of operations, financial condition, liquidity, growth prospects and business outlook.

Our operations may be impacted by natural disasters, which may become more frequent or severe as a result of climate change and may adversely impact our business and operating results as well as those of our potential customers and suppliers.

Natural disasters can impact us and our potential customers, as well as suppliers critical to our operations. Natural disasters include earthquakes, tsunamis, floods, droughts, hurricanes, wildfires, and other extreme weather conditions that can cause deaths, injuries, and critical health crises, power outages, restrictions and shortages of food, water, shelter, and medical supplies, telecommunications failures, materials scarcity, price volatility and other ramifications. Climate change is likely to increase both the frequency and severity of natural disasters and, consequently, risks to our business and operations.

We anticipate that our digital dental modeling and certain of our customer-facing operations will primarily be processed in our facilities located in Israel. Similarly, a significant portion of our research and development activities is located in Israel. If there is a natural disaster in the region, our employees could be impacted, our research could be lost, and our ability to create treatment plans, respond to customer inquiries or manufacture and ship our aligners or intraoral scanners could be compromised, which could result in our future customers experiencing significant product and services delays.

The effects of climate change on regional and global economies could change the supply, demand or availability of sources of energy or other resources material to our products and operations and affect the availability or cost of natural resources and goods and services on which we and our suppliers rely.

Business and Industry Risks

We are in the development stage, are not generating revenues and have no operating history as a manufacturer and distributor of orthodontic medical devices or platforms for consumer use.

We are in the development stage and face all of the risks and uncertainties associated with a new and unproven business. Our future is based on an unproven business plan with no historical facts to support projections and assumptions. We were founded in 2005 and have no operating history as a manufacturer and distributor of orthodontic medical devices or platforms to the consumer public. We are not currently generating revenues and do not expect to generate revenue until we have successfully completed the development and testing of our Platform. Investors should understand that an investment in a start-up business is significantly riskier than an investment in a business with any significant operating history. There can be no assurance that we will ever achieve revenues or profitability. Our operations are subject to all of the risks inherent in the establishment of a new business enterprise. The likelihood of our success must be considered in light of the problems, expenses, difficulties, complications and delays frequently encountered in connection with the formation of a pre-revenue business. Our lack of a significant and relevant operating history makes it difficult to manage operations and predict future operating results.

Our products and technologies may not be accepted by the intended commercial consumers of our products, which could harm our future financial performance.

There can be no assurance that our Platform will achieve wide acceptance by intended consumers and/or market acceptance generally. The degree of market acceptance for our Platform will also depend upon a number of factors, including the receipt and timing of regulatory approvals, if any, and the establishment and demonstration of the ability of our proposed device to provide the level of confidence and independence in an efficient manner and at a reasonable cost. Our failure to develop a commercial product to compete successfully with existing orthodontic treatments could delay, limit, or prevent market acceptance. There can be no assurance that the public will believe that our Platform is necessary or that the dental industry will actively pursue our product. Long-term market acceptance of our Platform will depend, in part, on the capabilities, operating features and price of our products and technologies as compared to those of other available products and services. As a result, there can be no assurance that our Platform will be able to achieve market penetration, revenue growth or profitability.

We expect continued operating losses and cannot be certain of our future profitability.

We have incurred net operating losses since inception. For the years ended December 31, 2023 and 2022, we incurred net losses of $3.5 million and $1.7 million, respectively. From inception through the present, we have spent significant funds in organizational and start up activities, to recruit key managers and employees, to develop our Platform, and for research and development.

We expect to continue incurring net operating losses in the foreseeable future as we increase expenditures for the development and marketing of the Platform. The time required for us to become profitable is uncertain, and there can be no assurance that we will achieve profitability on a sustained basis, if at all. As a result of our limited operating history, we have neither internal nor industry-based historical financial data for any significant period of time upon which to project revenues or base planned operating expenses. We expect that our results of operations may also fluctuate significantly in the future as a result of a variety of factors, including: the ability to enter into resale agreements with dental professionals, the ability to effectively market to the public, the ease of use of the Platform by consumers and dental professionals, intense competition from existing and new companies, retain and motivate qualified personnel, specific economic conditions in the aligner/consumer orthodontic market, general economic conditions; and other factors.

We may be unable to raise additional capital, which could harm our ability to compete.

We expect to expend significant capital to establish our brand, build manufacturing infrastructure, and develop both product and process technology. These initiatives may require us to raise additional capital over the next few years. We may consume available resources more rapidly than anticipated and we may not be able to raise additional funds when needed or on acceptable terms. If we raise additional funds through further issuances of equity or convertible debt securities, our existing stockholders could suffer significant dilution, and any new equity securities we issue could have rights, preferences, and privileges superior to those of holders of our Common Stock.

In connection with the Private Placement, we granted the Private Placement Investors a right to participate in future financings, until the second anniversary of the closing of the Private Placement, that involve the issuance of our Common Stock or Common Stock equivalents for cash consideration. Further, the Securities Purchase Agreement entered into in connection with the Private Placement contains “most favored nation” provisions, which may require future amendments to the terms of the Private Placement to give Private Placement Investors the benefit of more favorable terms governing certain future issuances of our Common Stock or Common Stock equivalents. Such participation right and “most favored nation” provisions may restrict our ability to secure future financings unless the Private Placement Investors waive their right to participate, the persons providing such financing accept the participation of the Private Placement Investors or the Private Placement Investors waive their rights under “most favored nation” provisions, respectively. If we are unable to obtain adequate financing or financing on terms satisfactory to us, when we require it, our ability to continue to pursue our business objectives and to respond to business opportunities, challenges, or unforeseen circumstances could be significantly limited, and our business, operating results, financial condition, and prospects could be materially adversely affected.

We will depend on the acceptance of teledentistry and a demand for correcting tooth alignment.

Continued and widespread market acceptance of teledentistry by consumers is critical to our future success. Delivery of our Platform via a teledentistry model will represent a change from traditional orthodontic treatment, which requires in person visits, and consumers may be reluctant to accept this model or may not find it preferable to traditional treatment. In addition, consumers may not respond to our direct marketing campaigns, or we may be unsuccessful in reaching our target audience, particularly in foreign jurisdictions where our advertising may be more heavily regulated. If consumers prove unwilling to adopt our teledentistry model as rapidly or in the numbers that we anticipate, our operating results could be materially harmed.

Consumer spending habits are affected by, among other things, prevailing economic conditions, inflationary factors, levels of employment, salaries and wage rates, consumer confidence, and consumer perception of economic conditions. In many markets, dental and orthodontic reimbursement is largely out of pocket for the consumer and, as result, utilization rates can vary significantly depending on economic growth. A general slowdown in the U.S. economy and certain international economies may result in, among other things, a decrease in the number of overall orthodontic case starts, a reduction in consumer spending on elective or higher value procedures, or a reduction in demand for dental and orthodontic services generally, each of which would have an adverse effect on our sales, if any, and operating results. Inflation and weakness in the global economy result in a challenging environment for selling dental and orthodontic technologies. If there is a reduction in consumer demand for orthodontic treatment generally, or if consumers choose to use a competitive product rather than our Platform for any reason, our business, results of operations, and financial condition could be materially harmed.

Adverse changes in, or interpretations of, laws, rules, and regulations governing remote healthcare and the practice of dentistry could have a material adverse effect on our business.

Our current business model is dependent, in part, on current laws, rules, and regulations governing remote healthcare and the practice of dentistry. If changes in laws, rules, regulations, or their interpretations are inconsistent with our current business model, we would need to adapt our business model accordingly, and our operations in certain jurisdictions may be disrupted, which could have a material adverse effect on our business, results of operations, and financial condition.

Our net revenues will depend primarily on our Platform and any decline in sales or average selling price of our Platform may adversely affect net revenues, gross margin and net income.

Our net revenues will be largely dependent on sales of our Platform, making widespread acceptance of our Platform by dental professionals and consumers critical to our future success. Our operating results could be harmed if:

The average selling prices of our Platform could be influenced by numerous factors, including the type and timing of products sold and foreign exchange rates.

Our average selling prices for our Platform may be adversely affected in the future after we commence sales if:

If our average selling prices decline after we commence sales, our net revenues, gross margin and net income may be adversely affected.

We will face competition from large internationally established aligner companies whose products have been widely accepted.

The dental industry is in a period of immense and rapid digital transformation involving products, technologies, distribution channels and business models. Once we commence marketing our Platform, we will face competition in the market for our Platform from the clear aligners market, and we expect competition from existing competitors and new companies that may enter the market or introduce new technologies in the future.

We expect to compete with a handful of large aligner companies including Align Technologies, SmileDirectClub, Dentsply Sirona, 3M™ Clarity™ Aligners, and Straumann Group. We expect some additional competition from other teledentistry solutions, and from new entrants into the orthodontic supply or clear aligner markets. Some of these competitors may have greater resources as well as the ability to leverage existing channels in the dental market to compete directly with us. In addition, we may also face future competition from companies that introduce new technologies. We may be unable to compete with these competitors, and one or more of these competitors may render our technology obsolete or economically unattractive.

Our business model depends on being able to reach consumers to raise brand awareness and encourage downloading our smartphone application, which may not prove successful or may become less effective or more costly to maintain in the long term.

There is no assurance our campaigns will achieve the returns on advertising spend desired, increase brand or product awareness sufficiently or generate goodwill and positive reputational goals. Moreover, should any entity or individual endorsing us or our products take actions, make or publish statements in support of, or lend support to events or causes which may be perceived by a portion of society negatively, our sponsorships or support of these entities or individuals may be questioned, boycotts of our products announced, and our reputation may be harmed, any of which could have a material effect on our gross margin and business overall.

In addition, various countries prohibit certain types of marketing activities. For example, some countries restrict direct to consumer advertising of medical devices. We could run afoul of restrictions and be ordered to stop certain marketing activities. Moreover, competitors do not always follow these restrictions, creating an unfair advantage and making it more difficult and costly for us to compete.

Future sales of our Platform may depend on our customers’ ability to obtain reimbursement from third-party payors, such as insurance carriers.

Future sales of our Platform may depend on our customers’ ability to obtain reimbursement from third-party payors, such as insurance carriers. Where such insurance or third-party reimbursement becomes available in the future, any reduction in insurance or other third-party payor reimbursement for our Platform may cause negative price pressure, which would reduce our revenues. Without a corresponding reduction in the cost to produce such products, the result would be a reduction in our overall gross profit. Similarly, any increase in the cost of such products would reduce our overall gross profit unless there was a corresponding increase in third-party payor reimbursement. We face additional risks associated with obtaining and maintaining coverage and securing reimbursement from foreign health care payment systems on a timely basis or at all. Failure by our patients to obtain or maintain coverage or to secure adequate reimbursement for our treatment by third-party payors could have an adverse effect on our business, results of operations, and financial condition.

Our growth and future success may depend on our ability to enhance our Platform or to develop, obtain regulatory clearance for, successfully introduce, and achieve market acceptance of new products and services.

We intend to continually improve and enhance our Platform and/or develop and introduce new products and services in order to maintain or increase our sales. The success of new or enhanced products and services may depend on a number of factors, including anticipating and effectively addressing consumer preferences and demand, the success of our sales and marketing efforts, innovation and timely and successful research and development, obtaining necessary regulatory clearances, anticipating and responding to competing products and technological innovations, adequately protecting our intellectual property rights, effective forecasting and management of product demand, effective management of manufacturing and supply costs, and the quality of our products. There can be no assurance that we will be able to successfully develop and introduce new or enhanced products and services. Even if new or enhanced products and services are successfully introduced, they may not rapidly gain market share and acceptance.

The development of new products and services in the dental and orthodontic industry can be complex and costly. We could experience delays in the development and introduction of new and enhanced products and services, including delays in obtaining any necessary regulatory clearances. Unanticipated problems in developing products and services could also divert substantial research and development resources, which may impair our ability to develop new products and services and enhancements of existing products and services, and could substantially increase our costs. If new or enhanced product and service introductions are delayed or not successful, we may not be able to achieve an acceptable return, if any, on our research and development efforts, and our business may be adversely affected. Even if we successfully innovate and develop new or enhanced products and services, we may incur substantial costs in doing so and our profitability may suffer.

Any failure in our ability to successfully develop, introduce, or achieve market acceptance of new or enhanced products and services, or any problems in the design or quality of any products or services we develop, could have a material adverse effect on our business, results of operations, and financial condition.

Operational Risks

Business disruptions could seriously harm our financial condition.

The occurrence of any material or prolonged business disruptions, whether internal or at key suppliers, could harm our business and results of operations, result in material losses, seriously harm our development efforts and future revenues, profitability and financial condition, adversely affect our competitive position, increase our costs and expenses, and require substantial expenditures and recovery time in order to fully resume operations.

When business disruptions occur, they may, individually or in the aggregate, affect our ability to continue critical research and development and could cause production delays or limitations, create adverse effects on distributors, disrupt supply chains, result in shipping and distribution disruptions and reduce the availability of or access to one or more facilities.

We are subject to operating risks, including excess or constrained capacity and operational inefficiencies, which could adversely affect our results of operations.

We are subject to operating risks, including excess or constrained capacity and pressure on our internal systems, personnel and suppliers. In order to manage current and anticipated future operations effectively, we must continually implement and improve our operational, financial and management information systems, hire, train, motivate, manage and retain employees, and ensure our suppliers remain diverse and capable of meeting growing demand for the systems, raw materials, parts and components essential to the manufacture and delivery of our products. We may be unable to balance near-term efforts to meet existing demand with future customer demand, including adding personnel, creating scalable, secure and robust systems and operations, and automating processes needed for long term efficiencies. Any such failure could have a material impact on our business, operations and prospects.

Our products and information technology systems are critical to our business. Issues with product development or enhancements, IT system integration, implementation, updates and upgrades could disrupt our operations and have a material impact on our business and operating results.

We rely on the efficient, uninterrupted and secure operation of our IT systems and are dependent on key third-party software embedded in our products and IT systems as well as third-party hosted IT systems to support our operations. All software and IT systems are vulnerable to damage, cyber attacks or interruption from a variety of sources. To effectively manage and improve our operations, our IT systems and applications require an ongoing commitment of significant expenditures and resources to maintain, protect, upgrade, enhance and restore existing systems and develop new systems to keep pace with continuing changes in information processing technology, evolving industry and regulatory standards, increasingly sophisticated cyber threats, and changing consumer preferences. Failure to adequately protect and maintain the integrity of our products and IT systems may result in a material effect on our financial position, results of operations and cash flows.

We plan to continuously upgrade and issue new releases of our products and customer-facing software applications, upon which customer-facing, manufacturing and treatment planning operations depend. Software applications and products containing software frequently contain errors or defects, especially when first introduced or when new versions are released. Additionally, the third-party software integrated into or interoperable with our products and services will routinely reach end of life, and as a consequence, may be exposed to additional vulnerabilities, including increased security risks, errors and malfunctions that may be irreparable or difficult to repair. The discovery of a defect, error or security vulnerability in our products, software applications or IT systems, incompatibility with future customers’ computer operating systems and hardware configurations with a new release or upgraded version or the failure of our products or primary IT systems may cause adverse consequences, including: delay or loss of revenues, significant remediation costs, delay in market acceptance, loss of data, disclosure of financial, health or other personal information of any customers or patients, product recalls, damage to our reputation, or increased service costs, any of which could have a material effect on our business, financial condition or results of our operations and the operations of our potential customers or our business partners.

Our success depends on key executive personnel, vendors, and relationships with key dental professionals and organizations.

Our success depends on the expertise and experience of our key personnel, including our CEO, CTO and top management. If we lose the services of any of these key personnel, our business and prospects could be materially and adversely affected. In addition, since the research and development of the Platform is mainly performed by outsourced third party vendors, although we could transfer the materials to other vendors, an interruption of service could materially and adversely affect us.

Our success depends largely on the talents and efforts of our personnel, and if we are unable to attract, motivate, train or retain our personnel, it may be more difficult to grow effectively and pursue our strategic priorities, and could materially effect on our results of operations. In addition, our market acceptance and success are dependent on attracting key orthodontists, dentists and dental organization to work in conjunction with us to educate the consumer market on our Platform.

There is no assurance that we will be able to attract and retain relationships with these key dental professionals to validate our Platform. The orthodontics industry is inundated with new products and services which demand the attention of practitioners, who do not have adequate time or motivation to explore new treatments for their patients or business opportunities of their practices.

Additionally, facilitating seamless leadership transitions for key positions is a critical factor in sustaining the culture and maintaining the success of our organization. If our succession planning efforts are not effective, it could adversely impact our business. We continue to assess the key personnel that we believe are essential to our long-term success, as future organizational changes could also cause our employee attrition rate to increase. If we fail to effectively manage any organizational or strategic changes, our financial condition, results of operations, and reputation, as well as our ability to successfully attract, motivate and retain key employees, could be harmed.

Legal, Regulatory and Compliance Risks

Complying with regulations enforced by FDA and other regulatory authorities is expensive and time consuming, and failure to comply could result in substantial penalties.

Our products (including the currently cleared version, as well as the next generation Platform for which we have not yet submitted the requisite 510(k) application to FDA) are considered medical devices and, accordingly, are subject to rigorous regulation by government agencies in the U.S. and other countries in which we intend to sell our products. Compliance with these rigorous regulations will affect capital expenditures, earnings and our competitive position. These regulations vary from country to country but cover, among other things, the following activities with respect to medical devices:

The regulations to which we are subject are complex. Regulatory changes could result in restrictions on our ability to carry on or expand our operations, higher than anticipated costs, or lower than anticipated sales. Our failure to comply with applicable regulatory requirements could result in enforcement action by FDA or state agencies, which may include any of the following sanctions:

If any of these events were to occur, they could harm our business.

We may not receive the necessary authorizations to market our Platform or any future new products, and any failure to timely do so may adversely affect our ability to grow our business.

Before we can sell a new medical device in the U.S., or market a new use of, new claim for, or significant modification to a legally marketed device, we must first obtain either FDA 510(k) clearance or approval, unless an exemption applies. In the 510(k) clearance process, before a device may be marketed, the applicant must submit a premarket notification to FDA under Section 510(k) of the FD&C Act, and FDA must determine that a proposed device is “substantially equivalent” to a legally-marketed “predicate” device. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics, not raise different questions of safety or effectiveness than the predicate device, and be as safe and as effective as the predicate device. The 510(k) clearance process can be expensive and uncertain and can take from three to 12 months, but may last significantly longer. Clinical data may be required in connection with an application for 510(k) clearance. Furthermore, even if we are granted regulatory clearances or approvals, they may include limitations on the indications for use or intended uses of the device, which may limit the market for the device.

Our first generation Aerodentis System is a Class II medical device, which was cleared by FDA for commercialization in the U.S. pursuant to the 510(k) notification process for movement and alignment of teeth during orthodontic treatment of malocclusion in April 2020. We are preparing to apply for 510(k) clearance for the updated version of the currently cleared device. Such updated Platform contains new and/or different components than the original device, which is why a new 510(k) clearance is required prior to marketing the Platform in the U.S. We have not yet filed a 510(k) submission for the Platform, and it has, thus, not been found by the FDA to be substantially equivalent to the first generation Aerodentis System. 

FDA can delay, limit, or deny 510(k) clearance, or other approval or reclassification, of a device for many reasons, including:

Any delay or failure to obtain necessary regulatory clearances or approvals could harm our business. Once cleared for marketing in the U.S., if ever, to the extent we decide to market the Platform for any additional indications for use and/or make any material modifications to any element of the device and/or the manufacturing or distribution thereof in the future, an additional 510(k) submission, and FDA clearance thereof, will be required.

In addition, FDA may change its policies, adopt additional regulations, revise existing regulations, or take other actions, or Congress may enact different or additional statutory requirements, which may prevent or delay clearance of our future products under development or impact our ability to modify our currently marketed products on a timely basis. Such policy, statutory, or regulatory changes could impose additional requirements upon us that could delay our ability to obtain new 510(k) clearances, increase the costs of compliance, or restrict our ability to maintain our current marketing authorizations.

We received our European CE mark and ISO/MDSAP certification in 2019. In light of our ISO/MDSAP certification, we believe that we are in substantial compliance with applicable E.U. regulations. We will also need to obtain regulatory approval in other foreign jurisdictions in which we plan to market and sell our products. The time required to obtain registrations or approvals, if required by other countries, may be longer than that required for FDA clearance, and requirements for such registrations, clearances, or approvals may significantly differ from FDA requirements. If we modify our products, we may need to apply for additional regulatory approvals before we are permitted to sell the modified product. In addition, we may not continue to meet the quality and safety standards required to maintain the authorizations that we have received. If we are unable to maintain our authorizations in a particular country, we will no longer be able to sell the applicable product in that country.

Failure to comply with these rules, regulations, self-regulatory codes, circulars, and orders could result in significant civil and criminal penalties and costs and could have a material adverse impact on our business. Also, these regulations may be interpreted or applied by a prosecutorial, regulatory, or judicial authority in a manner that could require us to make changes in our operations or incur substantial defense and settlement expenses. Even unsuccessful challenges by regulatory authorities or private relators could result in reputational harm and the incurring of substantial costs. In addition, many of these laws are vague or indefinite and have not been interpreted by the courts and have been subject to frequent modification and varied interpretation by prosecutorial and regulatory authorities, increasing compliance risks.

Certain modifications to our products may require new 510(k) clearance or other marketing authorizations.

Once a medical device is permitted to be legally marketed in the U.S. pursuant to a 510(k) clearance, a manufacturer may be required to notify FDA of certain modifications to the device. Manufacturers determine in the first instance whether a change to a product requires a new premarket submission, but FDA may review any manufacturer’s decision.

While our first generation Aerodentis System has received 510(k) clearance in 2020, we are preparing to apply for 510(k) clearance for the updated components of our Platform, which must, then, be found by the FDA to be substantially equivalent to the Aerodentis System and, thus, may not be lawfully marketed in the U.S. until FDA make a substantial equivalence determination and issues the requisite 510(k) clearance for the updated Platform. Although the development of our Platform has been carefully monitored and documented by professionals who are experienced in the FDA clearance process, there is no assurance that the FDA will agree that our Platform is substantially equivalent to the Aerodentis System and allow our Platform to be marketed in the United States. The FDA may determine that the device is not substantially equivalent and require a PMA or, more likely, a de novo reclassification, and/or require further information, such as additional test data, including data from clinical studies, before it is able to make a determination regarding substantial equivalence. By requesting additional information, the FDA can delay market introduction of our Platform. Delays in receipt of or failure to receive any necessary 510(k) clearance, de novo classification, or PMA, or the imposition of stringent restrictions for our Platform could have a material adverse effect on our business, results of operations and financial condition.

In the future, we may make other modifications to our products, including our Platform, and determine, based on our review of the applicable FDA regulations and guidance, that in certain instances new 510(k) clearances or other premarket submissions are not required. If FDA disagrees with our determinations, we may be subject to a wide range of enforcement actions, including, for example, a warning letter, among other consequences, after which we will likely have to cease marketing the applicable modified product and/or to recall distributed units of such modified product until we obtain the requisite clearance or approval.

Our products must be manufactured in accordance with federal, state, and international regulations, and we could be forced to recall our products or terminate production and/or face other regulatory enforcement actions if we fail to comply with these regulations.

The methods used in, and the facilities used for, the manufacture of our products must comply with FDA’s Quality System Regulation which is a complex regulatory scheme that covers the procedures and documentation of, among other requirements, the design, testing, validation, verification, complaint handling, production, process controls, quality assurance, labeling, supplier evaluation, packaging, handling, storage, distribution, installation, servicing, and shipping of medical devices. Furthermore, we are required to verify that our suppliers maintain facilities, procedures, and operations that comply with our quality standards and applicable regulatory requirements. FDA enforces the Quality System Regulation through, among other oversight methods, periodic announced or unannounced inspections of medical device manufacturing facilities, which may include the facilities of contractors, suppliers, or contract manufacturing organizations. Our products are also subject to similar state regulations as well as similar laws and regulations of foreign countries. Our failure to comply with the Quality System Regulation or similar requirements could result in enforcement actions, sanctions, recalls, detentions, seizures, or similar market actions with respect to our products, among other potential consequences. If any of these or other events occur, there could be a negative impact on the supply of our products, our reputation could be harmed, we could be exposed to product liability claims, and we could lose customers and suffer reduced revenue and increased costs.

Ongoing changes in healthcare regulation could negatively affect our revenues, business and financial condition.

There have been several proposed changes in the United States at the federal and state level for comprehensive reforms regarding the payment for, the availability of and reimbursement for healthcare services. These proposals have ranged from fundamentally changing federal and state healthcare reimbursement programs, including providing comprehensive healthcare coverage to the public under government-funded programs, to minor modifications to existing programs. One example, among countless others, is the Patient Protection and Affordable Care (the “Affordable Care Act”) which was the most significant Federal healthcare reform law enacted in the U.S. in recent history. The Affordable Care Act has undergone substantial challenges and changes since its enactment in 2010, and numerous other federal healthcare reform legislation, executive orders, and judicial rulings have been implemented in the years since, most of which have been or are aimed at lowering healthcare costs in the U.S. To the extent any such reform measures or any future initiatives reduce reimbursement or coverage eligibility or amount(s) for our Platform and/or any future products we may market in the U.S. (if any), our business may be adversely affected.

Healthcare reform initiatives will continue to be proposed and may reduce healthcare related funding in an effort. It is impossible to predict the ultimate content and timing of any healthcare reform legislation and its resulting impact on us. If significant reforms are made to the healthcare system in the United States, or in other jurisdictions, those reforms may increase our costs or otherwise negatively effect on our business, results of operations, and financial condition.

On April 5, 2017, the European Parliament passed the Medical Devices Regulation (Regulation 2017/745), which repeals and replaces the E.U. Medical Device Directive and became effective on May 26, 2021. The Medical Devices Regulation, among other things, is intended to establish a uniform, transparent, predictable, and sustainable regulatory framework across the EEA for medical devices and ensure a high level of safety and health while supporting innovation. The new regulations, among other things:

These modifications may have an effect on the way we conduct our business in the EEA.

Any change in the laws or regulations that govern the clearance and approval processes relating to our current, planned and future products could make it more difficult and costly to obtain clearance or approval for new products or to produce, market and distribute existing products. Significant delays in receiving clearance or approval or the failure to receive clearance or approval for our new products would have an adverse effect on our ability to expand our business.

Our products may cause or contribute to adverse medical events that we are required to report to FDA and other governmental authorities, and if we fail to do so, we would be subject to sanctions that could harm our reputation, business, results of operations, and financial condition. The discovery of serious safety issues with our products, or a recall of our products either voluntarily or at the direction of FDA or another governmental authority, could have a negative impact on us.

We are required to timely file various reports with FDA, including reports required by the medical device reporting regulations which require us to report to FDA when we receive or become aware of information that reasonably suggests that one of our products may have caused or contributed to a death or serious injury or malfunctioned in a way that, if the malfunction were to recur to the device or a similar device that we market, could cause or contribute to a death or serious injury. If we fail to comply with our reporting obligations, FDA or other governmental authorities could take action, including warning letters, untitled letters, administrative actions, criminal prosecution, imposition of civil monetary penalties, revocation of our device clearance, seizure of our products, or delay in clearance of future products. FDA and certain foreign regulatory bodies have the authority to require the recall of commercialized products under certain circumstances.

A government-mandated or voluntary recall by us could occur as a result of an unacceptable risk to health, component failures, malfunctions, manufacturing defects, labeling or design deficiencies, packaging defects, or other deficiencies, or failures to comply with applicable regulations. If we do not adequately address problems associated with our devices, we may face additional regulatory requirements or enforcement action, including required new marketing authorizations, FDA warning letters, product seizure, injunctions, administrative penalties, or civil or criminal proceedings.

We may initiate voluntary withdrawals, removals, or corrections for our products in the future that we determine do not require notification of FDA. If FDA disagrees with our determinations, it could require us to report those actions and we may be subject to enforcement action. A future recall announcement or other corrective action could harm our financial results and reputation, potentially lead to product liability claims against us, require the dedication of our time and capital, and negatively affect our sales.

In addition, FDA’s and other regulatory authorities’ policies may change, and additional government regulations may be enacted that could prevent, limit, or delay regulatory approval of our product candidates. For example, in November 2018, FDA announced that it plans to develop proposals to drive manufacturers utilizing the 510(k) pathway toward the use of newer predicates. It is unclear the extent to which any proposals, if adopted, could impose additional regulatory requirements on us that could delay our ability to obtain new 510(k) clearances, increase the costs of compliance, or restrict our ability to maintain our current clearances.

We also cannot predict the likelihood, nature, or extent of government regulation that may arise from future legislation or administrative or executive action, either in the U.S. or abroad. For example, the Trump Administration previously enacted several executive actions that could impose significant burdens on, or otherwise materially delay, FDA’s ability to engage in routine regulatory and oversight activities. It is difficult to predict how these executive actions and executive actions that may be taken under the Biden Administration may affect FDA’s ability to exercise its regulatory authority. If these executive actions impose constraints on FDA’s ability to engage in oversight and implementation activities in the normal course, our business may be negatively impacted.

Changes in internet regulations could adversely affect our business.

Laws, rules, and regulations governing internet communications, advertising, and e-commerce are dynamic, and the extent of future government regulation is uncertain. Federal and state regulations govern various aspects of our online business, including intellectual property ownership and infringement, trade secrets, the distribution of electronic communications, marketing and advertising, user privacy and data security, search engines, and internet tracking technologies. Future taxation on the use of the internet or e-commerce transactions could also be imposed. Existing or future regulation or taxation could increase our operating expenses and expose us to significant liabilities.

Disruptions at the FDA, other agencies or notified bodies caused by funding shortages or global health concerns could hinder their ability to hire, retain, or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, cleared or approved, or commercialized in a timely manner, or at all, which could negatively impact our business.

The ability of the FDA, other agencies and notified bodies to review and authorize or certify for marketing new products can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory and policy changes, agency’s or notified body’s ability to hire and retain key personnel and accept the payment of user fees, and other events that may otherwise affect the agency’s or notified body’s ability to perform routine functions. Average review times at the FDA and other agencies and notified bodies have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable. Disruptions at the FDA, other agencies and notified bodies may also slow the time necessary for new medical devices or modifications to be reviewed and/or cleared, approved or certified by necessary agencies or notified bodies, which would adversely affect our business. For example, over the last several years, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical FDA employees and stop critical activities.

Separately, in response to the global COVID-19 pandemic, the FDA postponed most inspections of domestic and foreign manufacturing facilities at various points. Even though the FDA has since resumed standard inspection operations of domestic facilities where feasible, the FDA has continued to monitor and implement changes to its inspectional activities to ensure the safety of its employees and those of the firms it regulates as it adapts to the evolving COVID-19 pandemic, and any resurgence of the virus or emergence of new variants may lead to further inspectional delays. Regulatory authorities outside the United States may adopt similar policy measures in response to the COVID-19 pandemic. If a prolonged government shutdown occurs, or if global health concerns continue to prevent the FDA or other regulatory authorities from conducting their regular inspections, reviews, or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

In the E.U., notified bodies must be officially designated to certify products and services in accordance with the MDR. While several notified bodies have been designated the COVID-19 pandemic has significantly slowed down their designation process and the current designated notified bodies are facing a large amount of requests with the new regulation as a consequence of which review times have lengthened although a new regulation amending the E.U. MDR was recently adopted in March 2023, extending existing transitional provisions. This situation could significantly impact the ability of notified bodies to timely review and process our regulatory submissions, which could have a material adverse effect on our business in the E.U. and the EEA (which consists of the 27 E.U. member states plus Norway, Liechtenstein and Iceland).

The misuse or off-label use of our Platform may harm our reputation in the marketplace, result in injuries that lead to product liability suits or result in costly investigations, fines or sanctions by regulatory bodies, particularly if we are deemed to have engaged in the promotion of these uses, any of which could be costly to our business.

Our first generation Aerodentis System is a Class II medical device was cleared by FDA for commercialization in the U.S. pursuant to the 510(k) notification process for movement and alignment of teeth during orthodontic treatment of malocclusion in April 2020. We are preparing to apply for 510(k) clearance for the Platform. If and when our Platform receives 510(k) clearance, it will be cleared for marketing by the FDA only for movement and alignment of teeth during orthodontic treatment of malocclusion. We, thus, will not be able to promote it for any other indications for use or make any promotional claims that are inconsistent with, or outside the scope of, such FDA clearance (often referred to as “off-label uses”). However, the assessment of whether a given claim is or is not consistent with a given FDA clearance or approval can often be subjective, and we cannot guarantee that FDA will always agree with our position regarding a particular claim or that all of our employees, representatives, and agents will abide by our marketing policies. If FDA determines that we have promoted any product without the requisite clearance or approval and/or for an off-label or unapproved use, it could take any number of enforcement actions against us, including (among others), issuing untitled or warning letters and/or pursuing an injunction, seizure, civil fine and/or criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action under other regulatory authority, such as laws prohibiting false claims for reimbursement, any of which would have a material adverse effect on our business, financial condition, and/or business as a whole.

Additionally, we must have competent and reliable scientific evidence or, where applicable, other adequate substantiation for each reasonable interpretation of every promotional claim we make. In particular, comparative or superiority claims generally require adequate, well controlled, head-to-head clinical studies, comparing the product to the applicable competing products. To the extent we make any claims, or are otherwise held responsible for third-party claims about any product we may market in the United States, without the requisite clinical substantiation, we could be subject to enforcement action by FDA and/or the Federal Trade Commission (the “FTC”), as well as a competitor challenge via the National Advertising Division (the “NAD”) of the Better Business Bureau. Our plans to utilize social media as a primary promotional tool for our device(s) increases the applicable enforcement risk, as it makes it easier for our employees, affiliates, and any third parties with which we may have a relationship and/or arrangement under which we are deemed responsible for such party’s claims about our product(s) to disseminate promotional claims about our product(s) that may be inconsistent with applicable regulations governing device promotions. Further, consumers can bring private false-advertising lawsuits, including class actions, against us for any material misrepresentations and/or deceptive or unsubstantiated claims (among other similar causes of action) in our promotional materials or other advertising. Any of the foregoing could have a material adverse effect on our business.

Laws and Regulations Governing Healthcare, including Health Information Privacy and Security Laws

We are subject to certain federal, state, and foreign fraud and abuse laws, health information privacy and security laws, and transparency laws, which, if violated, could subject us to substantial penalties. Additionally, any challenge to or investigation into our practices under these laws could cause adverse publicity and be costly to respond to, and thus could harm our business.

There are numerous U.S. federal and state, as well as foreign, laws pertaining to healthcare fraud and abuse, including anti-kickback, false claims, and physician transparency laws. Efforts to ensure that our business arrangements with third parties will comply with applicable healthcare laws and regulations involve substantial costs. Our business practices and relationships with providers and patients are subject to scrutiny under these laws. We may also be subject to patient information privacy and security regulation by both the federal government and the states and foreign jurisdictions in which we conduct our business. The healthcare laws and regulations that may affect our ability to operate include:

These laws and regulations, among other things, constrain our business, marketing, and other promotional activities by limiting the kinds of financial arrangements, including sales programs, we may have with physicians or other potential purchasers of our products. We have also entered into consulting agreements with physicians, which are subject to these laws. Further, while we do not submit claims and our future customers will make the ultimate decision on how to submit claims, we may provide reimbursement guidance and support regarding our products. Due to the breadth of these laws, the narrowness of statutory exceptions and regulatory safe harbors available, and the range of interpretations to which they are subject, it is possible that some of our current or future practices might be challenged under one or more of these laws.

To enforce compliance with healthcare regulatory laws, certain enforcement bodies have recently increased their scrutiny of interactions between healthcare companies and healthcare providers, which has led to a number of investigations, prosecutions, convictions and settlements in the healthcare industry. For example, U.S. federal and state regulatory and enforcement agencies continue to actively investigate violations of healthcare laws and regulations, including pursuing novel theories of liability under these laws. These government agencies recently have increased regulatory scrutiny and enforcement activity with respect to manufacturer reimbursement support activities and patient support programs, including bringing criminal charges or civil enforcement actions under the federal healthcare Anti-Kickback statute, federal civil False Claims Act, the health care fraud statute, and HIPAA privacy provisions. Responding to investigations can be time and resource consuming and can divert management’s attention from the business. Any such investigation or settlement could increase our costs or otherwise have an adverse effect on our business. Even an unsuccessful challenge or investigation into our practices could cause adverse publicity, and be costly to respond to.

If our operations are found to be in violation of any of the healthcare laws or regulations described above or any other healthcare regulations that apply to us, we may be subject to administrative, civil and criminal penalties, damages, fines, disgorgement, substantial monetary penalties, exclusion from participation in government healthcare programs, such as Medicare and Medicaid, imprisonment, additional reporting obligations, and oversight if we become subject to a corporate integrity agreement or other agreement to resolve allegations of non-compliance with these laws, reputational harm, and the curtailment or restructuring of our operations.

Since our Platform will utilize cloud-based information systems and the exchange of information between patents and doctors, we will be subject to numerous U.S. federal and state laws and regulations related to the privacy and security of personally identifiable information, including health information.

Among other data-privacy and/or confidentiality laws to which we may be subject, HIPAA establishes privacy and security standards that limit the use and disclosure of PHI and require covered entities and business associates to implement administrative, physical, and technical safeguards to ensure the confidentiality, integrity, and availability of individually identifiable health information in electronic form, among other requirements.

Violations of HIPAA may result in civil and criminal penalties. We must also comply with HIPAA’s breach notification rule which requires notification to affected individuals and the Secretary of Health and Human Services (“HHS”), and in certain cases to media outlets, in the case of a breach of unsecured PHI. The regulations also require business associates of covered entities to notify the covered entity of breaches by the business associate.

State attorneys general also have the right to prosecute HIPAA violations committed against residents of their states, and HIPAA standards have been used as the basis for the duty of care in state civil suits, such as those for negligence or recklessness in misusing personal information. In addition, HIPAA mandates that HHS conduct periodic compliance audits of HIPAA covered entities and their business associates for compliance.

Many states also have laws that protect the privacy and security of sensitive and personal information, including health information. These laws may be similar to or even more protective than HIPAA and other federal privacy laws. For example, the laws of the State of California are more restrictive than HIPAA. Where state laws are more protective than HIPAA, we must comply with the state laws we are subject to, in addition to HIPAA. California passed the California Consumer Privacy Act or CCPA on June 28, 2018, which went into effect January 1, 2020. On November 3, 2020, the California Privacy Rights Act of 2020 (“CPRA”), which amends the CCPA and adds new privacy protections that became effective on January 1, 2023, was enacted through a ballot initiative. While information we maintain that is covered by HIPAA may be exempt from the CCPA, other records and information we maintain on our patients may be subject to the CCPA. In certain cases, it may be necessary to modify our planned operations and procedures to comply with these more stringent state laws. Not only may some of these state laws impose fines and penalties upon violators, but also some, unlike HIPAA, may afford private rights of action to individuals who believe their personal information has been misused. In addition, state and federal privacy laws subject to frequent change.

In addition to HIPAA and state health information privacy laws, we may be subject to other state and federal privacy laws, including laws that prohibit unfair privacy and security practices and deceptive statements about privacy and security, laws that place specific requirements on certain types of activities, such as data security and texting, and laws requiring holders of personal information to maintain safeguards and to take certain actions in response to a data breach.

Foreign data protection, privacy, and other laws and regulations are often more restrictive than those in the U.S. The E.U., for example, traditionally has imposed stricter obligations under its laws and regulations relating to privacy, data protection and consumer protection than the U.S. In May 2018, the GDPR governing data practices and privacy in the E.U., became effective and replaced the data protection laws of the individual member states. GDPR requires companies to meet stringent requirements regarding the handling of personal data of individuals in the E.U. These more stringent requirements include expanded disclosures to inform members about how we may use their personal data, increased controls on profiling members, and increased rights for members to access, control and delete their personal data. In addition, there are mandatory data breach notification requirements. The law also includes significant penalties for non-compliance, which may result in monetary penalties of up to 20 million Euros or 4% of a company’s worldwide turnover, whichever is higher. GDPR and other similar regulations require companies to give specific types of notice and informed consent is required for the placement of a cookie or similar technologies on a user’s device for online tracking for behavioral advertising and other purposes and for direct electronic marketing, and the GDPR also imposes additional conditions in order to satisfy such consent, such as a prohibition on pre-checked consents. It remains unclear how the U.K. data protection laws or regulations will develop in the medium to longer term and how data transfer to the U.K. from the E.U. will be regulated. Outside of the E.U., there are many other countries with data protection laws, and new countries are adopting data protection legislation with increasing frequency.

Many of these laws may require consent from individuals for the use of data for various purposes, including marketing, which may reduce our ability to market our products.

There is no harmonized approach to these laws and regulations globally. Consequently, we increase our risk of non-compliance with applicable foreign data protection laws and regulations when we expand internationally. We may need to change and limit the way we use personal information in operating our business and may have difficulty maintaining a single operating model that is compliant. Compliance with such laws and regulations will result in additional costs and may necessitate changes to our business practices and divergent operating models, limit the effectiveness of our marketing activities, adversely affect our business, results of operations, and financial condition, and subject us to additional liabilities.

Our business could be adversely affected by professional and legal challenges to our business model or by new state actions restricting our ability to provide our products and services in certain states.

Since the success of our business will be dependent on the widespread adaptation of our Platform as a valid method for smile correction, many patients across multiple geographies will be needed to use our Platform and provide positive feedback and results. This will expose us to legal risk of patients or dental practitioners who may have a negative experience with our Platform to file lawsuits claiming damages or other claims. Although we will seek insurance coverage for such legal actions, there is no assurance that the amount of coverage will be sufficient to cover these claims. In addition, such legal actions from consumers and dental professionals may result in material and adverse effects on our ability to continue to conduct business due to negative press.

A number of dental and orthodontic professionals believe that aligners are appropriate for only a limited percentage of their patients and may believe that our Platform is even less appropriate than traditional aligners. National and state dental associations have issued statements discouraging use of orthodontics using a teledentistry platform. Increased market acceptance of remote treatment may depend, in part, upon the recommendations of dental and orthodontic professionals and associations, as well as other factors including effectiveness, safety, ease of use, reliability, aesthetics, and price compared to competing products. Furthermore, our ability to conduct business in each state is dependent, in part, upon that particular state’s treatment of remote healthcare and that state dental board’s regulation of the practice of dentistry.

Security breaches, data breaches, cyber attacks, other cybersecurity incidents or the failure to comply with privacy, security and data protection laws could materially impact our operations, patient care could suffer, we could be liable for damages, and our business, operations and reputation could be harmed.

We expect to retain confidential customer personal and financial, patient health information and our own proprietary information and data essential to our business operations. We will rely upon the effective operation of our IT systems, and those of our service providers, vendors, and other third parties to safeguard the information and data. Additionally, our success may be dependent on the success of healthcare providers, many of whom are comprised of individual or small operations with limited IT experience and inadequate or untested security protocols, in managing data privacy and data security requirements. It is critical that the facilities, infrastructure and IT systems on which we depend to run our business and the products we develop remain secure and be perceived by the marketplace and our potential customers to be secure. Despite the implementation of security features in our products and security measures in our IT systems, we and our service providers, vendors, and other third parties may become subject to physical break-ins, computer viruses or other malicious code, unauthorized or fraudulent access, programming errors or other technical malfunctions, hacking or phishing attacks, malware, ransomware, employee error or malfeasance, cyber attacks, and other breaches of IT systems or similar disruptive actions, including by organized groups and nation-state actors. For example, we may experience cybersecurity incidents and unauthorized internal employee exfiltration of company information.

Further, the frequency of third-party cyber-attacks has increased over the last several years. The military conflict in Ukraine may cause nation-state actors or hackers sympathetic to either side of the conflict to carry out cyber-attacks to achieve their goals, which may include espionage, information gathering operations, monetary gain, ransomware, disruption, and destruction. Significant service disruptions, breaches in our infrastructure and IT systems or other cybersecurity incidents could expose us to litigation or regulatory investigations, impair our reputation and competitive position, be distracting to our management, and require significant time and resources to address. Affected parties or regulatory agencies could initiate legal or regulatory action against us, which could prevent us from resolving the issues quickly or force us to resolve them in unanticipated ways, cause us to incur significant expense and liability, or result in judicial or governmental orders forcing us to cease operations or modify our business practices in ways that could materially limit or restrict the products and services we provide. Concerns over our privacy practices could adversely affect others’ perception of us and deter potential customers, patients and partners from using our products. In addition, patient care could suffer, and we could be liable if our products or IT systems fail to deliver accurate and complete information in a timely manner. We have internal monitoring and detection systems as well as cybersecurity and other forms of insurance coverage related to a breach event covering expenses for notification, credit monitoring, investigation, crisis management, public relations and legal advice. However, damages and claims arising from such incidents may not be covered or may exceed the amount of any coverage and do not cover the time and effort we may incur investigating and responding to any incidents, which may be material. The costs to eliminate, mitigate or recover from security problems and cyber attacks and incidents could be material and depending on the nature and extent of the problem and the networks or products impacted, may result in network or systems interruptions, decreased product sales, or data loss that may have a material impact on our operations, net revenues and operating results.

Our business will expose us to potential liability for the quality and safety of our products and services, how we advertise and market those products and services and how and to whom we sell them, and we may incur substantial expenses or be found liable for substantial damages or penalties if we are subject to claims or litigation.

Our products and services involve an inherent risk of claims concerning their design, manufacture, safety and performance, how they are marketed and advertised in a complex framework of highly regulated domestic and international laws and regulations, how we package, bundle or sell them to potential customers, who may be private individuals or companies or public entities such as hospitals and clinics, and how we train and support doctors, their staffs and patients who administer or use our products. Moreover, consumer products and services are routinely subject to claims of false, deceptive or misleading advertising, consumer fraud and unfair business practices. Additionally, we may be held liable if any product we develop or manufacture or services we offer or perform causes injury or is otherwise found unhealthy. If our products are safe but they are promoted for off-label usage, we may be investigated, fined or have our products or services enjoined or approvals rescinded or we may be required to defend ourselves in litigation. Although we maintain insurance for product liability, business practices and other types of activities we make or offer, coverage may not be available on acceptable terms, if at all, and may be insufficient for actual liabilities. Any claim for product liability, sales, advertising and business practices, regardless of its merit or eventual outcome, could result in material legal defense costs and damage our reputation, increase our expenses and divert management’s attention.

Increased focus on current and anticipated environmental, social and governance (“ESG”) laws and increased scrutiny of our ESG policies and practices may materially increase our costs, expose us to potential liability, adversely impact our reputation, employee retention, willingness of potential customers and suppliers to do business with us and willingness of investors to invest in us.

Our operations are subject to a variety of existing local, regional and global ESG laws and regulations, and we will likely be required to comply with new, broader, more complex and more costly laws and regulations that focus on ESG matters. Our compliance obligations will likely span all aspects of our business and operations, including product design and development, materials sourcing and other procurement activities, product packaging, product safety, energy and natural resources usage, facilities design and utilization, recycling and collection, transportation, disposal activities and workers’ rights.

Environmental regulations related to greenhouse gases are expected to have an increasingly larger impact on our or our suppliers’ energy sources. Many U.S. and foreign regulators have enacted or are considering enacting new or additional disclosure requirements or limits on the emissions of greenhouse gases, including, but not limited to, carbon dioxide and methane, from power generation units using fossil fuels. The effects of greenhouse gas emission limits on power generation are subject to significant uncertainties, including the timing of any new requirements, levels of emissions reductions and the scope and types of emissions regulated. These limits may have the effect of increasing our costs and those of our suppliers and could result in manufacturing, transportation and supply chain disruptions and delays if clean energy alternatives are not readily available in adequate amounts when required. Moreover, alternative energy sources, coupled with reduced investments in traditional energy sources and infrastructure, may fail to provide the predictable, reliable, and consistent energy that we, our suppliers and other businesses need for operations.

Meeting our obligations under existing ESG laws, rules, or regulations is already costly to us and our suppliers, and we expect those costs to increase as new laws are enacted, possibly materially. Additionally, we expect regulators to perform investigations, inspections and periodically audit our compliance with these laws and regulations, and we cannot provide assurance that our efforts or operations will be compliant. If we fail to comply with any requirements, we could be subject to significant penalties or liabilities and we may be required to implement new and materially more costly processes and procedures to come into compliance. Further these laws are subject to unpredictable changes. Even if we successfully comply with these laws and regulations, our suppliers may fail to comply. We may also suffer financial and reputational harm if future customers require, and we are unable to deliver, certification that our products are conflict free. In all of these situations, our future customers may stop purchasing products from us, and may take legal action against us, which could harm our reputation, revenues and results of operations.

Investor advocacy groups, institutional investors, investment funds, proxy advisory services, stockholders, and consumers are also increasingly focused on corporate ESG practices. Additionally, public interest and legislative pressure related to public companies’ ESG practices continues to grow. If our ESG practices fail to meet investor or other industry stakeholders’ evolving expectations and standards, including environmental stewardship, support for local communities, board of director and employee diversity, human capital management, employee health and safety practices, product quality, supply chain management, corporate governance and transparency and employing ESG strategies in our operations, our brand, reputation and employee retention may be negatively impacted, potential customers and suppliers may be unwilling to do business with us and investors may be unwilling to invest in us. In addition, as we work to align our ESG practices with industry standards, we have expanded and will likely continue to expand our disclosures in these areas. We also expect to incur additional costs and require additional resources to monitor, report, and comply with our various ESG practices. If we fail to adopt ESG standards or practices as quickly as stakeholders desire, report on our ESG efforts or practices accurately, or satisfy the disclosure and other expectations of stakeholders, our reputation, business, financial performance, growth, and stock price may be adversely impacted.

We are subject to consumer protection laws that regulate our marketing practices and prohibit unfair or deceptive acts or practices. Our actual or perceived failure to comply with such obligations could harm our business, and changes in such regulations or laws could require us to modify our products, marketing or advertising efforts.

In connection with the marketing or advertisement of our products and services, we could be the target of claims relating to false, misleading, deceptive, or otherwise noncompliant advertising or marketing practices, including under the auspices of the FTC and state consumer protection statutes. If we rely on third parties to provide any marketing and advertising of our products and services, we could be liable for, or face reputational harm as a result of, their marketing practices if, for example, they fail to comply with applicable statutory and regulatory requirements.

If we are found to have breached any consumer protection, advertising, unfair competition, or other laws or regulations, we may be subject to enforcement actions that require us to change our marketing and business practices in a manner which may negatively impact us. This could also result in litigation, fines, penalties, and adverse publicity that could cause reputational harm and loss of patient trust, which could have an adverse effect on our business.

We will be subject to a number of risks related to the credit card and debit card payments we plan to accept.

We plan to accept payments through credit and debit card transactions. For credit and debit card payments, we will be required to pay interchange and other fees, which may increase over time. An increase in those fees may require us to increase the prices we charge and would increase our operating expenses, either of which could harm our business, results of operations, and financial condition.

If we or our future processing vendors fail to maintain adequate systems for the authorization and processing of credit and debit card transactions, it could cause one or more of the major credit card companies to disallow our continued use of their payment products. In addition, if these systems fail to work properly and, as a result, we do not charge our patients’ credit or debit cards on a timely basis or at all, our business, revenue, results of operations, and financial condition could be harmed.

The payment methods that we will offer can also subject us to potential fraud and theft by criminals, who are becoming increasingly more sophisticated in exploiting weaknesses that may exist in the payment systems. If we fail to comply with applicable rules or requirements for the payment methods we will accept, or if payment-related data is compromised due to a breach, we may be liable for significant costs incurred by payment card issuing banks and other third parties or subject to fines and higher transaction fees, or our ability to accept or facilitate certain types of payments may be impaired. In addition, our patients could lose confidence in certain payment types, which may result in a shift to other payment types or potential changes to our payment systems that may result in higher costs. If we fail to adequately control fraudulent credit card transactions, we may face civil liability, diminished public perception of our security measures, and significantly higher card-related costs, each of which could harm our business, results of operations, and financial condition.

We will also be subject to payment card association operating rules, certification requirements, and rules governing electronic funds transfers, which could change or be reinterpreted to make it more difficult for us to comply. We will be required to comply with payment card industry security standards. Failing to comply with those standards may violate payment card association operating rules, federal and state laws and regulations, and the terms of our contracts with payment processors. Any failure to comply fully also may subject us to fines, penalties, damages, and civil liability, and may result in the loss of our ability to accept credit and debit card payments. Further, there is no guarantee that such compliance will prevent illegal or improper use of our payment systems or the theft, loss, or misuse of data pertaining to credit and debit cards, card holders, and transactions.

If we are unable to maintain our chargeback rate or refund rates at acceptable levels, our future processing vendor may increase our transaction fees or terminate its relationship with us. Any increases in our credit and debit card fees could harm our results of operations, particularly if we elect not to raise our rates for our products and services to offset the increase. The termination of our ability to process payments on any major credit or debit card would significantly impair our ability to operate our business.

We face risks related to our future international sales, including the need to obtain necessary foreign regulatory clearance or approvals.

Sales of our products outside the U.S. will subject us to foreign regulatory requirements that vary widely from country to country. We received our European CE mark and ISO/MDSAP certification in 2019. In light of our ISO/MDSAP certification, we believe that we are in substantial compliance with applicable E.U. regulations.

We will also need to obtain regulatory approval in other foreign jurisdictions in which we plan to market and sell our products. The time required to obtain clearances or approvals required by other countries may be longer than that required for FDA clearance or approval, and requirements for such approvals may differ from FDA requirements. We may be unable to obtain regulatory approvals and may also incur significant costs in attempting to obtain foreign regulatory approvals or maintain those we already have. If we experience delays in receipt of approvals to market our products in new jurisdictions, or if we fail to receive these approvals, we may be unable to market our products in international markets in a timely manner, if at all, which could materially impact our international expansion and adversely affect our business as a whole. In addition, we anticipate that regulations in certain foreign countries may challenge our teledentistry model. Some international regulations may also limit the availability of our Platform to patients in certain jurisdictions without our first obtaining a license or engaging a third party to provide such financing, or limit the financing options we can offer our patients. If any of these risks were to materialize, they could limit our expected international growth and profitability.

Intellectual Property Risks

Our success depends in part on our proprietary technology, and if we are unable to successfully enforce our intellectual property rights, our competitive position may be harmed.

Our success will depend in part on our ability to maintain existing intellectual property and to obtain and maintain further intellectual property protection for our products and services, both in the U.S. and in other countries. We intend to protect our intellectual property rights through a combination of patent, trademark, copyright, and trade secret laws, as well as third-party confidentiality and assignment agreements. Our inability to do so could harm our competitive position.

We rely on our portfolio of issued and pending patent applications in the U.S. and other countries to protect a large part of our intellectual property and our competitive position; however, our currently pending or future patent filings may not result in the issuance of patents. While we generally apply for patents in those countries where we intend to make, have made, use, or sell patented products, we may not accurately predict all of the countries where patent protection will ultimately be desirable. If we fail to timely file for a patent, we may be precluded from doing so at a later date. 

Patent rights are territorial, and patent protection extends only to those countries where we have issued patents. Filing, prosecuting and defending patents on our products and product candidates in all countries and jurisdictions throughout the world would be prohibitively expensive, and our intellectual property rights in some countries outside the United States could be less extensive than those in the United States. Many countries do not protect intellectual property to the same extent as the U.S. or Europe, and their litigation processes differ. Competitors may successfully challenge or avoid our patents, or manufacture products in countries where we have not applied for patent protection. Changes in the patent laws in the U.S. or other countries may diminish the value of our patent rights. As a result of these and other factors, the scope, validity, enforceability, and commercial value of our patent rights are uncertain and unpredictable.

Furthermore, the issuance of a patent, while presumed valid and enforceable, is not conclusive as to its validity or its enforceability and it may not provide us with adequate proprietary protection or competitive advantages against competitors with similar products. Any patents issued to us may be challenged, invalidated, held unenforceable, circumvented, or may not be sufficiently broad to prevent third parties from producing competing products similar in design to our products. In addition, any protection afforded by foreign patents may be more limited than that provided under U.S. patent and intellectual property laws. There can be no assurance that any of our patents, any patents licensed to us, or any patents which we may be issued in the future, will provide us with a competitive advantage or afford us protection against infringement by others, or that the patents will not be successfully challenged or circumvented by third parties, including our competitors. Further, there can be no assurance that we will have adequate resources to enforce our patents. Competitors may also be able to design around our patents. Other parties may develop and obtain patent protection for more effective technologies, designs or methods.

Our ability to enforce our patent rights depends on our ability to detect infringement. It is difficult to detect infringers who do not advertise the components that are used in their products. Moreover, it may be difficult or impossible to obtain evidence of infringement in a competitor’s or potential competitor’s product, particularly in litigation in countries other than the U.S. that do not provide an extensive discovery procedure. Any litigation to enforce or defend our patent rights, if any, even if we were to prevail, could be costly and time-consuming and would divert the attention of our management and key personnel from our business operations. We may not prevail in any lawsuits that we initiate and the damages or other remedies awarded if we were to prevail may not be commercially meaningful.

We also may seek to rely on protection of copyright, trade secrets, know how, and confidential and proprietary information. We generally enter into confidentiality and non-compete agreements with our employees, consultants, and collaborative partners upon their commencement of a relationship with us. However, these agreements may not provide meaningful protection against the unauthorized use or disclosure of our trade secrets or other confidential information, and adequate remedies may not exist if unauthorized use or disclosure were to occur. The exposure of our trade secrets and other proprietary information would impair our competitive advantages and could have a material adverse effect on our operating results, financial condition, and future growth prospects. In particular, a failure to protect our proprietary rights might allow competitors to copy our technology, which could adversely affect our pricing and market share. We may not be able to prevent the unauthorized disclosure or use of our technical knowledge or trade secrets by consultants, vendors, former employees and current employees. Further, other parties may independently develop substantially equivalent know-how and technology.

While we currently do not own any registered trademarks, we intend to rely on both registered and common law rights for our trademarks in the future. There can be no assurance that our future trademark applications will be approved. Third parties may also oppose our trademark applications, or otherwise challenge our use of the trademarks. In the event that our trademarks are successfully challenged, we could be forced to rebrand our products and services, which could result in loss of brand recognition, and could require us to devote resources to advertising and marketing new brands. Further, there can be no assurance that competitors will not infringe our trademarks, or that we will have adequate resources to enforce our trademarks.

Litigation, interferences, oppositions, re-exams, inter partes reviews, post grant reviews, or other proceedings are, have been, and may in the future be necessary in some instances to determine the validity and scope of certain of our proprietary rights, and in other instances to determine the validity, scope, or non-infringement of certain proprietary rights claimed by third parties to be pertinent to the manufacture, use, or sale of our products or provision of our services. These types of proceedings are unpredictable and may be protracted, expensive, and distracting to management. The outcome of such proceedings could adversely affect the validity and scope of our patent or other proprietary rights, hinder our ability to manufacture and market our products and provide our services, require us to seek a license for the infringed product or technology, or result in the assessment of significant monetary damages. An unfavorable ruling could include monetary damages or, in cases where injunctive relief is sought, an injunction prohibiting us from selling our products or providing our services. Any of these results from litigation could adversely affect our business, financial condition, and results of operations.

If we infringe or violate the patents or proprietary rights of other parties or are subject to an intellectual property infringement or misappropriation claim, our ability to grow our business may be severely limited.

Our commercial success also depends upon our ability, and the ability of any third party with which we may partner, to develop, manufacture, market and sell our products, if approved, and use our patent-protected technologies without infringing the patents of third parties. Extensive litigation over patents and other intellectual property rights is common in the dental and orthodontic industry.

We may not have identified all patents, published applications or published literature that affect our business either by blocking our ability to commercialize our products, by preventing the patentability of one or more aspects of our products, or by covering the same or similar technologies that may affect our ability to market our products. For example, we may not have conducted a patent clearance search sufficient to identify potentially obstructing third party patent rights. Moreover, patent applications in the United States are maintained in confidence for up to 18 months after their filing. In some cases, however, patent applications remain confidential in the U.S. Patent and Trademark Office, or the USPTO, for the entire time prior to issuance as a U.S. patent. Patent applications filed in countries outside of the United States are not typically published until at least 18 months from their first filing date. Similarly, publication of discoveries in the scientific or patent literature often lags behind actual discoveries. We cannot be certain that we were the first to invent, or the first to file, patent applications covering our products. We also may not know if our competitors filed patent applications for technology covered by our pending applications or if we were the first to invent the technology that is the subject of our patent applications. Competitors may have filed patent applications or received patents and may obtain additional patents and proprietary rights that block or compete with our patents.

We may therefore in the future be the subject of patent or other litigation. From time to time, we may in the future receive letters from third parties drawing our attention to their patent rights. While we do not believe that we infringe upon any valid and enforceable rights that have been brought to our attention, and we take necessary steps to ensure that we do not infringe on the rights of others, there may be other more pertinent rights of which we are presently unaware. The defense and prosecution of intellectual property suits, interference proceedings, and related legal and administrative proceedings could result in substantial expense to us and significant diversion of effort by our technical and management personnel. An adverse determination of any litigation or interference proceeding to which we may become a party could subject us to significant liabilities. An adverse determination of this nature could also put our patents at risk of being invalidated or interpreted narrowly or require us to seek licenses from third parties. Licenses may not be available on commercially reasonable terms or at all, in which event, our business would be materially adversely affected. Intellectual property litigation or claims could force us to cease developing, selling or otherwise commercializing one or more of our products; to pay substantial damages for past use of the asserted intellectual property; and redesign, or rename in the case of trademark claims, our product(s) to avoid such third party rights, which may not be possible or which could be costly and time-consuming. Any of these risks coming to fruition could have a material adverse effect on our business, results of operations, financial condition and prospects.

Our failure to secure trademark registrations could adversely affect our ability to market our products and operate our business.

Any future trademark applications in the United States and any other jurisdictions where we may file may not be allowed registration, and we may not be able to maintain or enforce our registered trademarks. During trademark registration proceedings, we may receive rejections. Although we are given an opportunity to respond to those rejections, we may be unable to overcome such rejections. In addition, in the USPTO and in corresponding foreign agencies, third parties are given an opportunity to oppose pending trademark applications and to seek to cancel registered trademarks. Opposition or cancellation proceedings may be filed against our applications and/or registrations, and our applications and/or registrations may not survive such proceedings. Failure to secure such trademark registrations in the United States and in foreign jurisdictions could adversely affect our ability to market our products and our business.

We may be subject to claims that our employees have wrongfully used or disclosed alleged trade secrets of their former employers.

As is common in the medical device industry, we may employ individuals who were previously employed at other companies similar to ours, including our competitors or potential competitors. We may become subject to claims that these employees or we have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of their former employers. Litigation may be necessary to defend against these claims. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to management.

Obtaining and maintaining patent protection depends on compliance with various procedures and other requirements, and our patent protection could be reduced or eliminated in case of non-compliance with these requirements.

Periodic maintenance fees, renewal fees, annuity fees and various other governmental fees on patents and/or applications will be due to the relevant patent agencies in several stages over the lifetime of the patents and /or applications. The relevant patent agencies require compliance with a number of procedural, documentary, fee payment and other provisions during the patent application process. In many cases, an inadvertent lapse can be cured by payment of a late fee or by other means in accordance with the applicable rules. However, there are situations in which the failure to comply with the relevant requirements can result in the abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, our competitors might be able to use our technologies and know-how which could have a material adverse effect on our business, prospects, financial condition and results of operation.

Patent terms may be inadequate to protect our competitive position on our product candidates for an adequate amount of time.

Patents have a limited lifespan. In the United States, if all maintenance fees are timely paid, the natural expiration of a patent is generally 20 years from its earliest U.S. non-provisional filing date. Various extensions may be available, but the life of a patent, and the protection it affords, is limited. Even if patents covering our products are obtained, once the patent life has expired for a product, we may be open to competition from competitive products. Given the amount of time required for the development, testing and regulatory review of new products, patents protecting such products might expire before or shortly after such products are commercialized. As a result, our patent portfolio may not provide us with sufficient rights to exclude others from commercializing products similar or identical to ours.

Risks Related Our Securities

The relative lack of U.S. public company experience of our management team may put us at a competitive disadvantage.

Our management team lacks U.S. public company experience and is generally unfamiliar with the requirements of the U.S. securities laws and U.S. Generally Accepted Accounting Principles (“GAAP”), which could impair our ability to comply with legal and regulatory requirements such as those imposed by Sarbanes-Oxley Act of 2002 (the “Sarbanes-Oxley Act”). The individuals who now constitute our senior management team have never had responsibility for managing a publicly traded company. Such responsibilities include complying with federal securities laws and making required disclosures on a timely basis. Our senior management may not be able to implement programs and policies in an effective and timely manner that adequately responds to such increased legal, regulatory compliance and reporting requirements. Our failure to comply with all applicable requirements could lead to the imposition of fines and penalties and distract our management from attending to the growth of our business.

Our Common Stock is not listed on any stock exchange and there is a limited market for shares of our Common Stock. Even if a market for our Common Stock develops, our Common Stock could be subject to wide fluctuations.

Our Common Stock is not listed on any stock exchange. Although our Common Stock is quoted on the OTC Pink Market operated by the OTC Markets Group Inc., there is a limited public market for shares of our Common Stock, and limited trades of our Common Stock have taken place on the OTC Pink Market. Even if the shares of our Common Stock may in the future trade greater volume on the OTC Pink Market, the liquidity of our Common Stock and the price at which our Common Stock is quoted are expected to be more limited than if such securities were quoted or listed on a national exchange. No assurances can be given that an active public trading market for our Common Stock will develop or be sustained. Trading volume may be limited by the fact that many major institutional investment funds, including mutual funds, as well as individual investors follow a policy of not investing in over the counter stocks and certain major brokerage firms restrict their brokers from recommending over the counter stocks because they are considered speculative, volatile and thinly traded. Lack of liquidity will limit the price at which stockholders may be able to sell our Common Stock.

Even if our Common Stock will in the future trade more actively on the OTC Pink Market, the price at which such Common Stock is quoted could be subject to wide fluctuations, in response to quarterly variations in our operating results, announcements by us or others, developments affecting us, and other events or factors. In addition, the stock market has experienced extreme price and volume fluctuations in recent years. These fluctuations have had a substantial effect on the market prices for many companies, often unrelated to the operating performance of such companies, and may adversely affect the market prices of the securities. Such risks could have an adverse effect on our Common Stock’s future liquidity. 

We cannot assure you that our Common Stock will become eligible for listing or quotation on any exchange and the failure to do so may adversely affect your ability to dispose of our Common Stock in a timely fashion.

In order for our Common Stock to become eligible for listing or quotation on any exchange, reverse merger companies must have had their securities traded on an over-the-counter market for at least one year, maintained a certain minimum closing price for not less than 30 of the most recent 60 days prior to the filing of an initial listing application and prior to listing, and timely filed with the SEC all required reports since consummation of the reverse merger, including one annual report containing audited consolidated financial statements for a full fiscal year commencing after the date of filing of the Current Report on Form 8-K which discloses the reverse merger. We may not be able to meet all of the filing requirements above and may not be able to satisfy the initial standards for listing or quotation on any exchange in the foreseeable future or at all. Even if we are able to become listed or quoted on an exchange, we may not be able to maintain a listing of the Common Stock on such stock exchange.

As a result of the Share Exchange, we became a company that is subject to the reporting requirements of federal securities laws, which can be expensive and may divert resources from other projects, thus impairing our ability to grow.

As a result of the Share Exchange, we became a public reporting company and, accordingly, subject to the information and reporting requirements of the Exchange Act, and other federal securities laws, including compliance with the Sarbanes-Oxley Act. The costs of preparing and filing annual and quarterly reports, proxy statements and other information with the SEC (including reporting of the Share Exchange) and furnishing audited reports to stockholders will cause our expenses to be higher than they would have been if we remained privately held and did not consummate the Share Exchange.

Public company compliance may make it more difficult for us to attract and retain officers and directors.

The Sarbanes-Oxley Act and new rules subsequently implemented by the SEC have required changes in corporate governance practices of public companies. As a public company, we expect these new rules and regulations to increase our compliance costs and to make certain activities more time consuming and costly. As a public company, we also expect that these new rules and regulations may make it more difficult and expensive for us to obtain director and officer liability insurance in the future and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, it may be more difficult for us to attract and retain qualified persons to serve on our board of directors or as executive officers.

Because we became public by means of a reverse merger, we may not be able to attract the attention of major brokerage firms.

There may be risks associated with us becoming public through a “reverse merger”. Securities analysts of major brokerage firms may not provide coverage of us since there is no incentive to brokerage firms to recommend the purchase of our Common Stock. No assurance can be given that brokerage firms will, in the future, want to conduct any secondary offerings on our behalf.

Our stock price may be volatile.

The price at which our Common Stock is quoted for sale is likely to be highly volatile and could fluctuate widely in price in response to various factors, many of which are beyond our control, including the following:

In addition, the securities markets have from time to time experienced significant price and volume fluctuations that are unrelated to the operating performance of particular companies. These market fluctuations may also materially and adversely affect the price at which our Common Stock is quoted for sale.

Our securities are restricted securities with limited transferability.

Our securities should be considered a long-term, illiquid investment. Our Common Stock has not been registered under the Securities Act, and cannot be sold without registration under the Securities Act or any exemption from registration. In addition, our Common Stock is not registered under any state securities laws that would permit its transfer. Because of these restrictions, a stockholder will likely find it difficult to liquidate an investment in our Common Stock.

We are subject to penny stock rules which will make the shares of our Common Stock more difficult to sell.

We are subject to the SEC’s “penny stock” rules since our shares of Common Stock trade below $5.00 per share. Penny stocks generally are equity securities with a per share price of less than $5.00. The penny stock rules require broker-dealers to deliver a standardized risk disclosure document prepared by the SEC that provides information about penny stocks and the nature and level of risks in the penny stock market. The broker-dealer must also provide the customer with current bid and offer quotations for the penny stock, the compensation of the broker-dealer and its salesperson, and monthly account statements showing the market value of each penny stock held in the customer’s account. The bid and offer quotations, and the broker-dealer and salesperson compensation information must be given to the customer orally or in writing prior to completing the transaction and must be given to the customer in writing before or with the customer’s confirmation.

In addition, the penny stock rules require that prior to a transaction the broker-dealer must make a special written determination that the penny stock is a suitable investment for the purchaser and receive the purchaser’s written agreement to the transaction. The penny stock rules are burdensome and may reduce purchases of any offerings and reduce the trading activity for shares of our Common Stock. As long as our shares of Common Stock are subject to the penny stock rules, the holders of such shares of Common Stock may find it more difficult to sell their securities.

FINRA sales practice requirements may also limit a stockholder’s ability to buy and sell our stock.

In addition to the “penny stock” rules described above, the Financial Industry Regulatory Authority (“FINRA”) has adopted rules that require that in recommending an investment to a customer, a broker-dealer must have reasonable grounds for believing that the investment is suitable for that customer. Prior to recommending speculative low priced securities to their non-institutional customers, broker-dealers must make reasonable efforts to obtain information about the customer’s financial status, tax status, investment objectives and other information. Under interpretations of these rules, FINRA believes that there is a high probability that speculative low priced securities will not be suitable for at least some customers. The FINRA requirements make it more difficult for broker-dealers to recommend that their customers buy our Common Stock, which may limit your ability to buy and sell our stock and have an adverse effect on the market for our shares.

We do not anticipate paying any cash dividends.

We presently do not anticipate that we will pay any dividends on any of our capital stock in the foreseeable future. The payment of dividends, if any, would be contingent upon our revenues and earnings, if any, capital requirements, and general financial condition. The payment of any dividends will be within the discretion of our board of directors. We presently intend to retain all earnings, if any, to implement our business plan; accordingly, we do not anticipate the declaration of any dividends in the foreseeable future.

Our shares of Common Stock are very thinly traded, and the price may not reflect our value and there can be no assurance that there will be an active market for our shares of Common Stock in the future.

Our shares of Common Stock are thinly traded. Due to the illiquidity, the price at which our Common Stock is quoted for sale may not accurately reflect our relative value. There can be no assurance that there will be an active market for our shares of Common Stock either now or in the future. Investors may not be able to liquidate their investment or liquidate it at a price that reflects the value of the business. If a more active market should develop, the price may be highly volatile. Because there may be a low price for our shares of Common Stock, many brokerage firms may not be willing to effect transactions in the securities. Even if an investor finds a broker willing to effect a transaction in the shares of our Common Stock, the combination of brokerage commissions, transfer fees, taxes, if any, and any other selling costs may exceed the selling price. Further, many lending institutions will not permit the use of such shares of Common Stock as collateral for a loans.

We may apply the proceeds of the Private Placement to uses that ultimately do not improve our operating results or increase the price of our Common Stock.

We intend to use the net proceeds from the Private Placement. However, our management has broad discretion in how we actually use these proceeds. These proceeds could be applied in ways that do not ultimately improve our operating results or otherwise increase the value of our Common Stock.

We may need additional financing which may not be available on acceptable terms, which may in turn dilute your investment in us.

Our future capital requirements will depend on many factors including but not limited to: market acceptance of our services; competitive pressure on the price of our products; the extent to which we invest in new locations, develop new relationships with producers of polymers and chemicals as well as consumers of polymers and chemicals; and the response of competitors to our products. We believe that the existing cash balances, including the net proceeds from the Private Placement, and funds generated from operations will provide us with sufficient funds to finance our operations for the foreseeable future. To the extent that our current funds, together with existing resources, are insufficient to fund our activities over the long-term, we may need to raise additional funds through equity or debt financing or from other sources.

Subject to the lock-up provisions of the Securities Purchase Agreement and other documents related to the Share Exchange and the Private Placement, as part of any future financing, we are generally not restricted from issuing additional securities, including shares of Common Stock, securities that are convertible into or exchangeable for, or that represent the right to receive, Common Stock or substantially similar securities. In particular, we may conduct one or more additional offerings following the closing of the Private Placement and may seek waiver of the lock-up provisions of the Securities Purchase Agreement and other documents related to the Share Exchange and the Private Placement to conduct such offerings. The sale of additional equity or convertible debt may result in additional dilution to our stockholders and such securities may have rights, preferences or privileges senior to those of the Common Stock. To the extent that we rely upon debt financing, we will incur the obligation to repay the funds borrowed with interest and may become subject to covenants and restrictions that restrict operating flexibility. No assurance can be given that additional equity or debt financing will be available or that, if available, it can be obtained on terms favorable to us or our stockholders. Failure to obtain necessary financing could have a material adverse effect on our business, financial condition and results of operations.

Our board of directors can authorize the issuance of preferred stock, which could diminish the rights of holders of our Common Stock, and make a change of control of us more difficult even if it might benefit our stockholders.

Our board of directors is authorized to issue shares of preferred stock in one or more series and to fix the voting powers, preferences and other rights and limitations of the preferred stock. Accordingly, we may issue shares of preferred stock with a preference over our Common Stock with respect to dividends or distributions on liquidation or dissolution, or that may otherwise adversely affect the voting or other rights of the holders of Common Stock. Issuances of preferred stock, depending upon the rights, preferences and designations of the preferred stock, may have the effect of delaying, deterring or preventing a change of control, even if that change of control might benefit our stockholders.

Anti-takeover provisions under Delaware corporate law may make it difficult for our stockholders to replace or remove our board of directors and could deter or delay third parties from acquiring our Company, which may be beneficial to our stockholders.

We are subject to the anti-takeover provisions of the Delaware General Corporation Law (“DGCL”), including Section 203 of the DGCL. Under these provisions, if anyone becomes an “interested stockholder,” we may not enter into a “business combination” with that person for three (3) years without special approval, which could discourage a third party from making a takeover offer and could delay or prevent a change of control. For purposes of Section 203 of the DGCL, “interested stockholder” means, generally, someone owning fifteen percent (15%) or more of our outstanding voting stock or an affiliate of ours that owned fifteen percent (15%) or more of our outstanding voting stock during the past three (3) years, subject to certain exceptions as described in Section 203 of the DGCL.

Future sales of significant amounts of our Common Stock may depress our stock price.

Future issuances of our Common Stock or securities convertible into, or exercisable or exchangeable for, our Common Stock, or the expiration of lock-up provisions that restrict the issuance of new Common Stock or the trading of outstanding Common Stock, could cause the price at which our Common Stock is quoted for sale to decline. We cannot predict the effect, if any, of future issuances of our securities, or the future expirations of lock-up provisions, on the price of our Common Stock. In all events, future issuances of our Common Stock would result in the dilution of your holdings. In addition, the perception that new issuances of our securities could occur, or the perception that locked-up parties will sell their securities when the lock-ups expire, could adversely affect the price at which our Common Stock is quoted for sale.

The Securities Purchase Agreement entered into in connection with the Private Placement contains provisions that prevent us, subject to certain exceptions, from offering additional shares of capital stock for up to eighteen (18) months after the closing of the Private Placement, subject to the approval of the Lead Investor. Further, in connection with the Share Exchange, Private Dror shareholders are subject to the lock-up provisions contained in the Share Exchange Agreement. These lock-up provisions may be waived pursuant to the terms of Securities Purchase Agreement and the Share Exchange Agreement, as applicable. If these restrictions on future offerings and lock-up restrictions are waived, additional shares of our Common Stock may become available for sale or resale, subject to applicable law, including without notice, which could reduce the price at which our Common Stock is quoted for sale.

Further, a significant percentage of our outstanding Common Stock is currently owned by a small number of stockholders. These stockholders may sell in the future large amounts of our stock over relatively short periods of time. Sales of substantial amounts of our stock by existing stockholders may adversely affect the price at which our stock is quoted for sale by creating the perception of difficulties or problems with our business that may depress our stock price.

Financial, Tax and Accounting Risks

If our goodwill or long-lived assets become impaired, we may be required to record a material charge to earnings.

Under GAAP, we review our goodwill and long-lived asset group for impairment when events or changes in circumstances indicate the carrying value may not be recoverable. Additionally, goodwill must be tested for impairment at least annually. The qualitative and quantitative analysis used to test goodwill are dependent upon various assumptions and reflect management’s best estimates. Changes in certain assumptions, including revenue growth rates, discount rates, earnings multiples and future cash flows may cause a change in circumstances indicating that the carrying value of goodwill or the asset group may be impaired and assessing these assumptions and predicting and forecasting future events can be difficult. Goodwill and purchased assets require periodic fair value assessments to determine if they have become impaired. Consequently, we may be required to record a material charge to earnings in the financial statements during the period in which any impairment of goodwill or long-lived asset group is determined.

Changes in, or interpretations of, accounting rules and regulations, could result in unfavorable accounting charges.

We prepare our consolidated financial statements in conformity with GAAP. These principles are subject to interpretation by the SEC and various bodies formed to interpret and create appropriate accounting policies. A change in these policies or in the way these policies are interpreted by us or regulators could have a material effect on our reported results and may even retroactively affect previously reported financial statements.

We are required to annually assess our internal control over financial reporting and any adverse results from such assessment may result in a loss of investor confidence in our financial reports and adversely affect our stock price.

We are required to furnish in each of our annual reports on Form 10-K a report by our management regarding the effectiveness of our internal control over financial reporting that includes, among other things, an assessment of the effectiveness of our internal control over financial reporting as of the end of our fiscal year, including a statement as to whether our internal control over financial reporting is effective. Our internal controls may become inadequate because of changes in personnel, updates and upgrades to existing software, failure to maintain accurate books and records, changes in accounting standards or interpretations of existing standards, and, as a result, the degree of compliance of our internal control over financial reporting with the existing policies or procedures may become ineffective. Establishing, testing and maintaining an effective system of internal control over financial reporting requires significant resources and time commitments on the part of our management and our finance staff, may require additional staffing and infrastructure investments and increases our costs of doing business. If we are unable to assert that our internal control over financial reporting is effective in any future period (or if our auditors are unable to express an opinion on the effectiveness of our internal controls or conclude that our internal controls are ineffective), the timely filing of our financial reports could be delayed or we could be required to restate past reports, and cause us to lose investor confidence in the accuracy and completeness of our financial reports in the future, which could have an adverse effect on our stock price.

Our effective tax rate may vary significantly from period to period.

We operate globally and are subject to taxes in the U.S. and foreign countries. Various internal and external factors may affect our future effective tax rate. These factors include changes in the global economic environment, changes in our legal entity structure or activities performed within our entities, changes in our business operations, changes in tax laws, regulations and/or rates, new or changes to accounting pronouncements, changing interpretations of existing tax laws or regulations, changes in relative proportions of revenues and income before taxes in the various jurisdictions in which we operate that have differing statutory tax rates, changes in overall levels of pretax earnings, the future levels of tax benefits of stock-based compensation, settlement of income tax audits and non-deductible goodwill impairments.

Our effective tax rate is also dependent in part on forecasts of full year results which can vary materially. Furthermore, we may continue to experience significant variation in our effective tax rate related to excess tax benefits on stock-based compensation, particularly in the first quarter of each year when the majority of our equity awards vest.

New tax laws and practices, changes to existing tax laws and practices, or disputes regarding the positions we take regarding tax laws, could negatively affect our provision for income taxes as well as our ongoing operations.

We are subject to tax laws both within and outside of the U.S. requiring significant judgment in determining our worldwide provision for income taxes. Changes in tax laws or changes to how those laws are applied to our business in practice, could affect the amount of tax to which we are subject and the manner in which we operate. Additionally, the Organization for Economic Cooperation and Development’s (“OECD”) Base Erosion and Profit Shifting (“BEPS”) project has resulted in considerable new reporting obligations worldwide as OECD member countries have implemented its guidance. The OECD continues to publish guidance pursuant to the BEPS and other projects which, if adopted by member countries, may affect our tax positions in many of the countries in which we do business.

Moreover, the application of indirect taxes (such as sales and use tax (“SUT”), value-added tax (“VAT”), goods and services tax (“GST”), and other indirect taxes) to our operations is complex and evolving. U.S. states, local and foreign taxing jurisdictions have differing rules and regulations governing differing types of taxes, and these rules and regulations are subject to varying interpretations and exemptions that may change over time. We collect and remit SUT, VAT, GST and other taxes in many jurisdictions and we are routinely subject to audits. We are also routinely subject to audits regarding our tax reporting and remissions by local and national government, and we may also be subject to audits in U.S. states, local and foreign jurisdictions for which we have not accrued tax liabilities. The positions we take regarding taxes as well as the amounts we collect or remit may be challenged and we may be liable for failing to collect or remit all or any portion of taxes deemed owed or the taxes could exceed our estimates. One or more U.S. states or countries may seek to impose incremental or new sales, use, or other tax collection obligations on us or may determine that such taxes should have but have not been paid by us. If we dispute rulings or positions taken by tax authorities, we may incur expenses and expend significant time and effort to defend our positions, which may be costly.

On August 16, 2022, the Inflation Reduction Act of 2022 (“IRA”) was enacted. It contains numerous new U.S. federal tax law provisions, including a corporate alternative minimum tax on adjusted financial statement income and an excise tax on corporate stock repurchases, effective after December 31, 2022. We continue to evaluate the IRA’s impact to our business, which may be material.

The application of existing, new, or future tax laws, and results of audits, whether in the U.S. or internationally, could harm our business. Furthermore, there have been and will continue to be substantial ongoing costs associated with complying with the various tax requirements and defending our positions in the numerous markets in which we conduct or will conduct business.

Use Of Proceeds

All of the shares of Common Stock offered by the Selling Securityholders pursuant to this prospectus will be sold by the Selling Securityholders for their respective accounts. We will not receive any of the proceeds from these sales. We will pay certain expenses associated with the registration of the securities as described in the “Plan of Distribution” section in this prospectus.

We will receive up to an aggregate of approximately $31,839,535.83 from the exercise of the Warrants, assuming the exercise in full of all of the Warrants for cash. We expect to use the net proceeds from the exercise of the Warrants for general corporate purposes. We will have broad discretion over the use of proceeds from the exercise of the Warrants. There is no assurance that the holders of the Warrants will elect to exercise any or all of such Warrants. We believe the likelihood that Warrant holders will exercise their Warrants, and therefore the amount of cash proceeds that we would receive, is dependent upon the price at which our Common Stock is quoted for sale.

Determination Of Offering Price

The Selling Securityholders will determine at what price they may sell the securities offered by this prospectus, and such sales may be made at a fixed price of $0.011 per share until our Common Stock is listed or quoted on an existing public trading market, such as OTC Market Group, Inc.’s “OTCQB” or “OTCQX” market, and thereafter at prevailing market prices or privately negotiated prices. For more information, see “Plan of Distribution.”

Market for Our Common Stock And Dividends

Market Information

Our Common Stock is currently approved for quotation on the OTC Pink Market under the symbol DROR. As soon as practicable, and assuming we satisfy all necessary initial listing requirements, we intend to apply to have our Common Stock listed for trading on The Nasdaq Stock Market, although we cannot be certain that any such application will be approved.

The following table sets forth the high and low sale prices for our Common Stock for the periods indicated as reported by OTC. The high and low prices reflect inter-dealer prices, without retail mark-up, mark-down or commission and may not necessarily represent actual transactions.

Stockholders of Record

As of April 15, 2024, there were 209 stockholders of record holding 495,454,546 shares of common stock.

Dividend Policy

We have not paid any cash dividends on shares of our Common Stock to date. It is the present intention of our board of directors to retain future earnings for the development, operation, and expansion of our business, and our board of directors does not anticipate declaring or paying any cash dividends for the foreseeable future. The payment of dividends is within the discretion of our board of directors and will be contingent upon our future revenues and earnings, as well as our capital requirements and general financial condition, and we can give no assurances that we will ever have excess funds available to pay dividends.

Management’s Discussion And Analysis Of
Financial Condition And Results Of Operations

The following discussion and analysis of the results of operations and financial condition of Dror Ortho-Design, Inc. (the “Company”) as of the years ended December 31, 2023 and 2022 should be read in conjunction with our financial statements and the notes to those financial statements that are included elsewhere in this prospectus. Our historical results do not necessarily reflect what our historical financial position and results of operations would have been had we been a stand-alone public company during the periods presented. In addition, our historical results are not necessarily indicative of the results to be expected for any future period.

In addition to historical consolidated financial information, the following discussion contains forward-looking statements that reflect our plans, estimates and beliefs. Our actual results could differ materially from those discussed in the forward-looking statements. Factors that could cause or contribute to these differences include those discussed below and elsewhere in this prospectus, particularly in the sections titled “Risk Factors” and “Cautionary Note Regarding Forward-Looking Statements” in this prospectus.

Unless the context otherwise requires, references in this “Management’s Discussion and Analysis of Financial Condition and Results of Operations” to “Dror,” “we”, “us”, “our”, and the “Company” are intended to refer to (i) following the Share Exchange (as defined below), the business and operations of Dror Ortho-Design, Inc. and its consolidated subsidiaries, and (ii) prior to the Share Exchange, Dror Ortho-Design Ltd. (the predecessor entity and currently wholly owned subsidiary of Dror Ortho-Design, Inc.).

Overview

We were incorporated as Novint Technologies, Inc. in the State of New Mexico in April 1999. On February 26, 2002, we changed our state of incorporation to Delaware by merging with Novint Technologies, Inc., a Delaware corporation. On July 5, 2023, we entered into a share exchange agreement with the shareholders of Dror Ortho-Design Ltd. (“Private Dror”), pursuant to which the shareholders of Private Dror agreed to exchange all of their outstanding ordinary shares Private Dror for shares of our common stock and convertible preferred stock (the “Share Exchange”). On August 14, 2023 the Share Exchange was consummated and we changed our name to “Dror Ortho-Design, Inc.”

Following the Share Exchange, we succeeded to the business of Private Dror as our sole line of business. The Share Exchange is being accounted for as a recapitalization, with Private Dror deemed to be the accounting acquirer and the Company the acquired company. Accordingly, Private Dror’s historical financial statements for periods prior to the consummation of the Share Exchange have become those of the Company. Operations reported for periods prior to the Share Exchange are those of Private Dror.

Our Company

We have reimagined the way people can correct their smile.

We plan to disrupt the aligner market by offering millions of people a revolutionary alternative. We believe that people do not need to change their lifestyle to correct their smile as they are required to do with existing aligner solutions. 

Existing aligner solutions generally share the same treatment principles, which are different from our solution. In most cases, patients seeking to improve their smile need to undergo a 12-to-15 month process of wearing plastic aligners, which need to be worn the entire day and should only be removed while eating or drinking. Patients are prescribed a series of 20 to 30 aligners that are intended to forcefully move teeth progressively closer to their intended final position. This process causes pain every time a new aligner is used and restricts blood circulation, which counterproductively slows down tooth movement. All-day aligner solutions are also intrusive, as patients need to conduct their lives at work or school wearing the plastic aligners. In addition, most existing aligner therapies require multiple visits to an orthodontist to monitor the progress of treatment plans through intraoral scanning, physical examination and patient testimony.

We believe that recent rapid advancements in technology have made traditional aligner solutions no longer the most effective treatment option for smile correction. Our Company has developed a proprietary AI-based platform to correct people’s smiles in a discreet and less painful manner (the “Platform”). The Platform uses only one smart aligner to gently move teeth into their optimum position with pulsating air while the patient is sleeping or at home.

We are involved in the research and development of an orthodontic alignment platform. We have several patents for the technology used in the Platform and are currently in the process of preparing the Platform for clearance by the FDA.

Our predecessor first generation Aerodentis System is a Class II medical device, which was cleared by FDA for commercialization in the U.S. pursuant to the 510(k) notification process for movement and alignment of teeth during orthodontic treatment of malocclusion in April 2020. The Company is preparing to apply for 510(k) clearance for the Platform as a Class II medical device, which constitutes an updated version of the currently cleared device. Such updated Platform contains new and/or different components than the original device, which is why a new 510(k) clearance is required prior to marketing the Platform in the U.S. We have not yet filed a 510(k) submission for the Platform, and it has, thus, not been found by the FDA to be substantially equivalent to the first generation Aerodentis System.

The Company currently does not generate revenues to fund operations and anticipates that it will continue to incur significant losses as it continues to develop the Platform. Please refer to “Risk Factors - We are in the development stage, are not generating revenues and have no operating history in the manufacturing and distribution of orthodontic medical devices or platforms for consumer use.” for additional information. The Company intends to spend approximately $2.5 million over the next 18 months on software and hardware development as well as the accompanying regulatory approvals and IP protection associated with such software and hardware projects.

Share Exchange

As discussed above, on July 5, 2023, we entered into a Share Exchange Agreement (as amended by that certain Amendment to Share Exchange Agreement, dated August 14, 2023, the “Share Exchange Agreement”) with Private Dror and all shareholders of Private Dror. Pursuant to the Share Exchange Agreement, on August 14, 2023, the shareholders of Private Dror transferred all of their ordinary shares in Private Dror to us in exchange for 7,576,999 newly issued shares of our Series A Convertible Preferred Stock, par value $0.0001 per share (the “Series A Preferred Stock”), and 106,782,187 shares of our common stock, par value $0.0001 per share (the “Common Stock”). As a result of these share exchanges, Private Dror became our wholly owned subsidiary.

Pursuant to the terms and conditions of the Share Exchange Agreement:

Private Placement

In connection with the closing of the Share Exchange, pursuant to the Purchase Agreement, the Company sold (1) the Private Placement Shares and shares of Series A Preferred Stock, or a combination thereof, at an effective purchase price of $0.011 per Private Placement Share or share of Common Stock underlying such shares of Series A Preferred Stock and (2) Private Placement Warrants to the Private Placement Investors in connection with the Private Placement. The Company received aggregate gross proceeds of $5,025,000 in connection with the first closing of the Private Placement on August 14, 2023 and an additional $200,000 in connection with a second closing of on September 13, 2023.

The Company and the Private Placement Investors also entered into the Registration Rights Agreement, pursuant to which the Company agreed to register, among other registrable securities (as further described in the Registration Rights Agreement), on Form S-1 (or, if the Company is then eligible, on Form S-3) with the SEC: (i) the Private Placement Shares, (ii) Conversion Shares issuable in connection with the Purchase Agreement, (iii) the shares of Common Stock underlying the Private Placement Warrants issued to the Private Placement Investors, and (iv) the shares of Common Stock and Conversion Shares underlying the shares of Series A Preferred Stock issued to the investors in the December 2021 Transaction in connection with the Share Exchange.

Results of Operations

We have experienced net losses and negative cash flows from operations since our inception. As of December 31, 2023, we had cash of approximately $3.3 million, positive working capital of $3.2 million, an accumulated deficit of approximately $13.7 million and used cash in operations during the twelve months ended December 31, 2023 of approximately $2.4 million. The Company does not currently have sufficient available liquidity to fund its operations for at least the next 12 months. Such factors raise substantial doubt about our ability to sustain operations for at least one year from the issuance of the audited financial statements included in the registration statement of which this prospectus forms a part. The accompanying financial statements do not include any adjustments related to the recoverability and classification of asset amounts or the classification of liabilities that might be necessary should we be unable to continue as a going concern.

In response to these conditions and events, we are evaluating various financing strategies to obtain sufficient additional liquidity to meet our operating and capital requirements for the next twelve months following the date of the audited financial statements included in the registration statement of which this prospectus forms a part. The potential sources of financing that we are evaluating include one or any combination of secured or unsecured debt, convertible debt and equity in both public and private offerings. We also plan to finance near-term operations with our cash on hand, as well as by exploring additional ways to raise capital. There is no assurance we will manage to raise additional capital or otherwise increase cash flows, if required. The sources of financing described above that could be available to us and the timing and probability of obtaining sufficient capital depend, in part, on our further developing and commercializing the Platform and on future capital market conditions. If our current assumptions regarding the pace of such development are incorrect, or if there are any other changes or differences in our current assumptions that negatively impact our financing strategy, we may have to reduce expenditures or significantly delay, scale back or discontinue the development or commercialization of the Platform.

Results of Operations

Comparison of the Years Ended December 31, 2023 and 2022

The following table sets forth the results of operations of the Company years ended December 31, 2023 and 2022:

Research and Development Expenses

Research and development expenses were $1,004,443 for the year ended December 31, 2023, compared to $850,860 for the year ended December 31, 2022. The increase in research and development expenses of $153,763 or 18%, was primarily due to increased outsourced consulting activities relating to the development of our new product and an increase in salaries.

General and Administrative Expenses

General and administrative expenses were $1,120,426 for the year ended December 31, 2023, compared to $814,653 for the year ended December 31, 2022. The increase in general and administrative expenses of $305,773 or 38%, was primarily due to an increase in professional fees relating to public company compliance following the Share Exchange as well as an increase in salaries and related expenses during the year ended December 31, 2023.

Share-based Compensation Expenses

Share-based compensation expenses were $2,253,793 for the year ended December 31, 2023, compared to $19,908 for the year ended December 31, 2022. The increase in general and administrative expenses of $2,233,885 or 11221%, was primarily due to the modification of the outstanding stock options as part of the Share Exchange.

Financial (Income) Expenses, Net

Financial income was $90,147 for the year ended December 31, 2023, compared to $1,742 of income for the year ended December 31, 2022. The increase in financial income, net of $88,405 or 5075%, was primarily due to exchange rate differences resulting from the translation of NIS based assets and liabilities to US dollars.

Gain on retirement of royalty accrual

Gain on retirement of royalty accrual was $720,632 for the year ended December 31, 2023, which resulted from the retirement of outstanding royalty accrual due to the expiration of the relevant Statute of Limitations. There was not retirement of royalty accrual for the year ended December 31, 2022.

Liquidity and Capital Resources

Sources of Liquidity

We do not have revenues to fund operations. We anticipate that we will continue to incur significant losses as we continue to develop our product. Historically, our primary source of cash has been proceeds from the sale of equity instruments. We raised $5.225 million through a private placement sale of shares to new investors concurrent with the Share Exchange. We intend to spend approximately $2.5 million over the next 18 months on software and hardware development as well as the accompanying regulatory approvals and IP protection associated with such software and hardware projects.

We will need to raise additional capital to fund operating losses and grow our operations. There can be no assurance however that we will be able to raise additional capital when needed, or at terms deemed acceptable, if at all. Such factors raise substantial doubt about our ability to sustain operations for at least one year from the issuance of the audited financial statements included in this prospectus. The accompanying financial statements do not include any adjustments related to the recoverability and classification of asset amounts or the classification of liabilities that might be necessary should we be unable to continue as a going concern. For additional information, see the section above titled “MD&A—Going Concern.”

Private Placement

See the section above titled “MD&A—Our Company—Private Placement.”

Cash Flows for the Years Ended December 31, 2023 and 2022

Cash Used in Operating Activities

Net cash used in operating activities was $2,362,386 for the year ended December 31, 2023 as compared to $1,517,178 for the year ended December 31, 2022. The amount for the year ended December 31, 2023 primarily consisted of a net loss of $3,567,883 offset by non-cash charges of $1,533,831 (including: Share-based compensation expense of $2,253,793, gain on retirement of royalty accrual of $720,632 and depreciation expense of $670), and a decrease in operating assets and liabilities excluding cash of $328,334. The amount for the year ended December 31, 2022 primarily consisted of a net loss of $1,683,499, partially offset by non-cash charges of $20,578 (including: Share-based compensation expense of $ 19,908 and depreciation of $670), and a decrease in operating assets and liabilities excluding cash of $145,743.

Cash Provided by Investing Activities

During the year ended December 31, 2023, net cash provided by investing activities was $17,966 relating to the cash received in the Share Exchange. During the year ended December 31, 2022, there was no cash provided by or used in investing activities.

Cash Provided by Financing Activities

During the year ended December 31, 2023, net cash provided by financing activities was $4,653,204 relating to the net proceeds from the private placement raise. During the year ended December 31, 2022, there was no cash provided by or used in financing activities.

Effects of Inflation

Management does not believe that inflation has had a material impact on our business, sales, or operating results during the periods presented.

Off-Balance Sheet Arrangements

We currently do not have any off-balance sheet arrangements or financing activities with special-purpose entities.

Critical Accounting Policies and Use of Estimates

The SEC defined a company’s critical accounting policies as the ones that are most important to the portrayal of the company’s financial condition and results of operations and which require the company to make its most difficult and subjective judgments, often as a result of the need to make estimates of matters that are inherently uncertain.

Based on this definition, we have identified the critical accounting policies and judgments addressed below. We also have other key accounting policies that are significant to understanding our results.

Research and Development

We expense all research and development costs as they are incurred. Research and development includes expenditures in connection with in-house research and development salaries and staff costs, consulting fees, as well as proprietary products and technology.

Use of Estimates

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates or assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting periods. Actual results could vary from those estimates. Management utilizes various other estimates, including but not limited to accrued royalties, estimated lives of long-lived assets, the valuation of stock-based compensation, the valuation allowance for deferred tax assets and other contingencies. The results of any changes in accounting estimates are reflected in the financial statements in the period in which the changes become evident. Estimates and assumptions are reviewed periodically, and the effects of revisions are reflected in the period that they are determined to be necessary.

Recent Accounting Pronouncements

In October 2021, the FASB issued ASU 2021-07—Compensation—Stock Compensation (Topic 718): Determining the Current Price of an Underlying Share for Equity-Classified Share-Based Awards. The measurement objective in Topic 718 for share-based awards is fair value based, and the current price input is measured at fair value. This input is used in determining an award’s fair value. The practical expedient in this Update allows a non-public entity to determine the current price of a share underlying an equity classified share-based award using the reasonable application of a reasonable valuation method. The practical expedient in this Update is effective prospectively for all qualifying awards granted or modified during fiscal years beginning after December 15, 2021, and interim periods within fiscal years beginning after December 15, 2022. Early application, including application in an interim period, is permitted for financial statements that have not yet been issued or made available for issuance as of October 25, 2021. The implementation of this standard did not have a material effect on our financial statements.

Quantitative and Qualitative Disclosures about Market Risk

Not applicable.

Business

Overview

We have reimagined the way people can correct their smile.

We plan to disrupt the aligner market by offering millions of people a revolutionary alternative. We believe that people do not need to change their lifestyle to correct their smile as they are required to do with existing aligner solutions.

Existing aligner solutions generally share the same treatment principles, which are different from our solution. In most cases, patients seeking to improve their smile need to undergo a 12-to-15 month process of wearing plastic aligners, which need to be worn the entire day and should only be removed while eating or drinking. Patients are prescribed a series of 20 to 30 aligners that are intended to forcefully move teeth progressively closer to their intended final position. This process causes pain every time a new aligner is used and restricts blood circulation, which counterproductively slows down tooth movement. All-day aligner solutions are also intrusive, as patients need to conduct their lives at work or school wearing the plastic aligners. In addition, most existing aligner therapies require multiple visits to an orthodontist to monitor the progress of treatment plans through intraoral scanning, physical examination and patient testimony.

We believe that recent rapid advancements in technology have made traditional aligner solutions no longer the most effective treatment option for smile correction. Our Company has developed a proprietary AI-based platform to correct people’s smiles in a discreet and less painful manner (the “Platform”). The Platform uses only one smart aligner to gently move teeth into their optimum position with pulsating air while the patient is sleeping or at home. The Company has several patents for the technology used in the Platform and is currently in the process of preparing the prototype for clearance by the FDA.

Our predecessor first generation Aerodentis System is a Class II medical device, which was cleared by FDA for commercialization in the U.S. pursuant to the 510(k) notification process for movement and alignment of teeth during orthodontic treatment of malocclusion in April 2020. The Company is preparing to apply for 510(k) clearance for the Platform as a Class II medical device, which constitutes an updated version of the currently cleared device. Such updated Platform contains new and/or different components than the original device, which is why a new 510(k) clearance is required prior to marketing the Platform in the U.S. We have not yet filed a 510(k) submission for the Platform, and it has, thus, not been found by the FDA to be substantially equivalent to the first generation Aerodentis System.

The Company currently does not generate revenues to fund operations and anticipates that it will continue to incur significant losses as it continues to develop the Platform. Please refer to “Risk Factors - We are in the development stage, are not generating revenues and have no operating history in the manufacturing and distribution of orthodontic medical devices or platforms for consumer use.” for additional information. The Company intends to spend approximately $2.5 million over the next 18 months on software and hardware development as well as the accompanying regulatory approvals and IP protection associated with such software and hardware projects.

Our Product

The First Generation Aerodentis System

Our Company was founded in 2005 with the goal of offering millions of people a chance to correct their smile in a more discreet and less painful manner. The first generation of our product underwent ten years of development by a team of twelve orthodontists, engineers, industrial designers and dental technicians. This team developed a new clinically-proven method for correcting Class 1 and Class 2 malocclusion using pulsating air. The team discovered that using pulsating air improved blood circulation in the gums, which is essential to tooth movement. This first-generation product (the “Aerodentis System”) was composed of a base control unit that contained a pump and motor that would deliver pulses of air to a micro balloon that was part of a mouthpiece to be used by the patient to deliver the treatment. The use of pulsating air is the base patented technology that distinguishes our Aerodentis System from clear aligner therapies, which are designed to move teeth using continuous resistant force delivered by the aligner, which impairs blood flow.

Pictured: Base control unit, containing micro-pump and controls, attached to the smart aligner. The smart aligner is composed of an outer mouthpiece structure, which is shaped based on the final position of the teeth for a perfect smile. Behind the outer mouthpiece structure is a micro balloon that is attached to the base control unit with a fine and flexible microtube. The balloon delivers pulsating air by inflating and deflating. Behind the balloon is the “push structure,” which provides the balloon with a surface to push against as it gently moves the teeth.

In January 2013, the Aerodentis System composed of the base control unit and custom mouthpiece received the European CE Mark. In 2020, it received FDA clearance via the 510(k) process as a Class II medical device, with broad indication for use “in movement and alignment of teeth during orthodontic treatment of malocclusion.” Clinical trials demonstrated that Aerodentis System was suitable for adults and pediatric patients with Class 1 and Class 2 malocclusion, including crowding, proclination and retroclination. Further, clinical trials have demonstrated that the effectiveness of Aerodentis System was consistent with the results achieved by the Invisalign clear aligners solution provided by Align Technology, Inc.

Pictured: Close up of smart aligner with (1) outer structure formed based on the final tooth position desired for a perfect smile and (2) micro balloon inserted between the outer structure and the inner structure to support the balloon’s expansion.

The Platform

Building on the Aerodentis System, we have developed a prototype of the Platform, our next generation, comprehensive enhanced solution to Class 1 and Class 2 malocclusion for which we intend to submit a 510(k) application for marketing in the U.S., as the Platform is beyond the scope of our current FDA clearance. The prototype of the Platform was developed over the course of eighteen months and is intended to advance the proven clinical features of the Aerodentis System while incorporating recent developments in artificial intelligence utilized in our Aerodentis AI Cloud (as defined below) component of the Platform, secure wireless and Internet communications with Internet of Things (“IoT”) devices used in our Smart Aligner System component of the Platform and advanced imaging and 3D printing technologies. “IoT devices” refers to pieces of hardware, such as sensors, actuators, gadgets, appliances, or machines, that are programmed for certain applications and can transmit data over the internet or other networks.

Our Platform is comprised of three primary components:

The following provides a more detailed description of each of the components of our Platform:

Aerodentis Smartphone Application

Our freely downloadable Aerodentis smartphone application will allow potential patients to make a video of their smile and teeth and upload the video to the Aerodentis AI Cloud. This 2D video will be converted into a 3D model using our proprietary patent-pending AI based image analysis technology. The underlying algorithms will then perform an initial analysis to determine if the patient can potentially benefit from our solution. This complex analysis will be performed in minutes and will deliver a “Go/No Go” response. Once a patient begins treatment, they will use the smartphone application to provide their dental professional with ongoing remote monitoring of their treatment progress. The smartphone application can be used to upload additional teeth videos showing progress and to transmit data from the Smart Aligner System (described below), including the amount of time the patient used the Smart Aligner System and the pressure and pulse levels administered.

Aerodentis AI Cloud

The Aerodentis AI Cloud will be used to analyze data uploaded by patients and to facilitate communication between patients and dental professionals. If the analysis performed on the initial video upload from the Aerodentis smartphone application delivers a “Go” result, the patient will be invited to have an intraoral scan performed by a dental professional from our network of participating providers. The results of this intraoral scan will be uploaded to the Aerodentis AI Cloud by the dental professional, and the Aerodentis AI Cloud will use a machine learning algorithm to compare the scan with the initial model generated from the patient’s initial video upload. The machine learning algorithm is designed to learn with every scan how to improve the accuracy of the 3D images it generates from smartphone videos. We believe that the Platform’s image analysis of smartphone videos will eventually approach the level of accuracy observed in intraoral scans. If we achieve this, we will be in a position to be able provide highly accurate image analysis of teeth that can be used throughout the dental industry since it would allow for smartphones to essentially replace the need for intraoral scans for certain cases. This would dramatically increase the efficiency and treatment delivery cycle in the dental industry and result in a potentially material economic benefit to our Company in the future.

The Aerodentis AI Cloud will also be used for ongoing analysis of patient data and management of a patient’s treatment plan throughout the treatment. A dental professional will use our Platform to develop a customized treatment plan, including any interproximal reduction necessary before treatment begins, based on the Smart Aligner System. As a patient uploads progress videos from their smartphone, the Platform will compare tooth positions in previous videos to current positions. A dental professional will be able to use this data to remotely monitor the treatment progress and modify the treatment plan remotely as needed.

Smart Aligner System

The Platform’s Smart Aligner System features a newer, more advanced version of our first generation Aerodentis System, featuring completely redesigned micropump and motor mechanisms. The redesign has significantly increased the pump’s pressure capacity, efficiency, and durability. In addition, the base control unit of Smart Aligner System is now IoT-enabled to allow external secure communication with the device using Wi-Fi and Bluetooth. The device will thus be able to communicate with the patient’s smartphone as well as the Aerodentis AI Cloud and the designated dental professional, subject to FDA clearance.

The clear aligner of a patient’s Smart Aligner System will be created using 3D printing based on various 3D images of the patient’s teeth that are collected and analyzed in the Aerodentis AI Cloud. This will represent a significant development in our industry since, today, aligners are not printed but produced using a thermoforming process. Other companies have implemented 3D printing to produce the aligner models but not the actual aligners. Although using 3D printing is a superior method for production due to its level of precision and customizability, it has not been implemented in the production of aligners in the traditional aligner market because it would be financially prohibitive to do so, since traditional aligner solutions would need to print multiple aligners for each patient. Since our solution requires only one smart aligner to be produced for each patient, we will be able to take advantage of this cost-effective production method that will also have economies of scale.

Market Opportunity

Malocclusion is one of the most prevalent clinical dental conditions in the world, affecting approximately 60% to 75% of the global population.¹ It is estimated that there are approximately 500 million people globally with malocclusion who could benefit from straightening their teeth.² However, most people afflicted by malocclusion do not seek orthodontic treatment due to a number of reasons, including negative perceptions of metal braces, affordability of treatment, and accessibility to doctors in certain markets and geographies. Annually, only approximately 21 million or 4.2% of the affected individuals elect treatment by orthodontists.³ Today, most orthodontic patients continue to have their malocclusions treated with the use of traditional corrective methods such as metal arch wires and brackets, referred to as braces, augmented with elastics, metal expanders, headgear or functional appliances, and other ancillary devices as needed. Upon completion of a patient’s treatment, their dental professional may recommend the patient use a retainer appliance to preserve the benefits of their treatments.

According to a 2022 study conducted by Precedent Research (“Precedence Research 2022 Study”), the global clear aligners market size was estimated at $6.29 billion in 2022 and is expected to surpass around $46.3 billion by 2030, expanding at a compound annual growth rate (CAGR) of 28.34% during the period 2022 to 2030.⁴

Source: Precedence Research Study, 2022

Our Platform seeks to address this large and underserved global market by offering a discreet, less intrusive and less painful treatment alternative to available clear aligners and traditional orthodontic treatments. Our Platform is optimized to correct malocclusions that relate to the “social six,” which are the front upper six and lower six teeth. We believe that at least 30% of those who currently seek treatment, or 6.6 million people, could benefit from using Aerodentis to correct their smiles. According to the Precedence Research 2022 Study, by 2028, the market for clear aligners will surpass 22 million people, which is our total addressable market.

Source: Precedence Research Study, 2022

Our total addressable market also stands to benefit from the recent trend toward dentists, rather than orthodontists, delivering orthodontic care through clear aligners. In order for a smile correction solution to work properly, a treatment plan and monitoring needs to be executed by a dental professional, such as dentists and orthodontists. Since the Aerodentis Platform provides the necessary information to develop and administer a treatment plan using our solution, it may be used by dentists as well as orthodontists, which expands our target distribution channel to cover both orthodontists and dentists. According to a 2019 Journal of Family Medicine and Primary Care article, approximately 36% of dentists were already performing orthodontic procedures such as the malocclusion corrections.⁵ This is an indication of an ongoing trend of dentists assuming more orthodontic treatment offerings in their practices. We believe that the ease of use of our Platform will also facilitate eventually selling our solution directly to the consumer in qualified cases with remote dental professional involvement.

Business Model

Our business model is focused on engaging the customer throughout their smile correction journey and beyond. Our solution provides an innovative, proprietary end-to-end platform that spans all stages of customer engagement, from initial acquisition to treatment and ongoing maintenance-all with minimal need for office visits and lifestyle inconvenience.

Customer Initiated Dentist-Controlled Treatment

Unlike other solutions in the market, such as traditional clear aligners, we believe our Platform will provide greater access and interaction with the customers and allow customers to feel more involved in their own treatment process. We hope to engage the power of social media and other digital outlets to initiate initial demand for our Platform by the customers.

Customer Engagement – Value Creation

Our Platform is designed to have a high level of engagement with customers, if cleared for marketing in the U.S., as users will be able to scan their teeth with any smartphone and see how our solution can improve their smile. We intend to engage the customer from their first interest in correcting their smile and guide them throughout our convenient process.

Network of Dental Professionals

If cleared by FDA, the Platform will generally function via the following process: if the customer can benefit from our Platform, based on the severity of their tooth alignment and malocclusions, they will be referred to a dental professional in our network for an intraoral scan. Once the results of the scan are uploaded to our Aerodentis AI Cloud, a remote dental professional will develop a treatment plan for that patient using our Platform. If the patient requires any tooth preparation before initiating treatment with the smart aligner, the patient will again be referred to a dental professional in our network. The Company currently does not have any written agreements or arrangements with any dental professionals governing provision of orthodontic services using our Platform.

Monetization – Value Capture

We intend to generate revenues by:

Sales and Marketing

We intend to market our Platform in Israel, the European Union (the “E.U.”), United Kingdom, United States, and Canada, subject to each country’s requisite regulatory authorization. We intend to utilize social media to promote our Platform to our targeted audience. The Platform has a potentially viral social media message that we hope will drive demand by placing user-generated content on all major social medial platforms. Our marketing strategy themes and promotional messages will emphasize the ease and convenience offered by our Platform as compared to other available treatments.

Research and Development

We have a research and development team with software development, medical device development, dental/orthodontic, data science and other innovation focused backgrounds. Our current research and development efforts are primarily focused on enhancing the Platform and developing software and processes to enable the manufacture of our smart aligner systems in volume as well as productizing the prototype through the development of UI/UX and system integration with existing patent systems.

As of April 2024, our outsourced software development team is composed of eight professionals with years of experience in artificial intelligence development, data science, application and software engineering. Members of the team come from the elite intelligence units of the Israeli Defense Force and have a breadth of experience in computer vision, imaging and targeting systems development. Our software development team is headed by Yossi Avni, who has 25 years of experience in developing advanced artificial intelligence applications, behavioral biometrics, behavioral profiling and advanced security systems and holds over 100 patents in these areas.

Our hardware and systems development team is composed of six professionals with years of experience in FDA-compliant medical device development. They are a part of Aran Research Development Prototypes Ltd. (“Aran”), a leading Israeli product design and development firm and our third-party hardware development partner. Aran is ISO 13485 certified and maintains a ISO 7 cleanroom for testing and assembly. Aran also has manufacturing facilities and a full suite of 3D printing capabilities, which are compliant with FDA guidelines. Our hardware and systems development team is headed by Avi Kayton, a skilled development manager and systems engineer with 16 years of experience, including extensive experience in medical device companies.

Intellectual Property

We have three issued U.S. patents, four pending U.S. patents and numerous global patent applications. These patents and applications cover critical aspects of our Platform, including the movement of teeth using pulsating air, our diagnostic process, Platform technology, and 3D printing. Our issued U.S. patents 7819661, 10806376, and 10820965 expire in 2030, 2040, and 2040 respectively. We currently do not own any trademarks.

We intend to continue to pursue further intellectual property protection through U.S. and non-U.S. patent applications, trademark applications, and non-disclosure and non-compete agreements. We also intend to seek to protect our software, documentation and other written materials under trade secret and copyright laws. There can be no assurance that patents will be issued as a result of any patent application or that patents that have been issued to us or may issue in the future will be found to be valid and enforceable and sufficient to protect our technology or products.

Seasonality

Our business is generally not seasonal. However, we may experience moderate sales fluctuations, at certain periods of the year, such as January, due to renewed consumer focus on health improvement and aesthetics.

Competition

The dental industry is in a period of immense and rapid digital transformation involving products, technologies, distribution channels and business models. We face competition in the market for our Platform from the clear aligners market and we expect competition from existing competitors and new companies that may enter the market or introduce new technologies in the future. We compete with several well-established companies both in the traditional orthodontic industry and the direct-to-consumer clear aligner industry, including Align Technologies, Smile Direct Club, Dentsply Sirona (Byte), 3M Clarity Aligners, and Straumann Group. Although these companies offer clear aligner solutions, and thus do not use technologies similar to the Platform, we expect that potential patients will view clear aligner products as alternatives to the Platform. For this reason, we view any company in the clear aligners market as a potential competitor.

We believe that the principal competitive factors in the market for orthodontic appliances include:

We believe that our Platform will compare favorably with respect to each of these factors.

Government Regulation

Our products (including the currently cleared version, as well as the next generation Platform for which we have not yet submitted the requisite 510(k) application to FDA) are considered medical devices, and, accordingly, are subject to rigorous regulation by government agencies in the United States and other countries in which we intend to sell our products. These regulations vary from country to country but cover, among other things, the following activities with respect to medical devices:

FDA Regulation

In the U.S., numerous laws and regulations govern the processes by which medical devices are developed, manufactured, brought to market and marketed. These include the Federal Food, Drug, and Cosmetic Act (“FD&C Act”) and its implementing regulations issued by FDA, among others. Unless an exemption applies, each medical device commercially distributed in the United States requires FDA clearance of a 510(k) premarket notification (“510(k) clearance”), granting of a de novo request, or approval of an application for premarket approval (“PMA”). In general, under the FD&C Act, medical devices are classified in one of three classes on the basis of the controls necessary to reasonably assure their safety and effectiveness. A medical device’s classification determines the level of FDA review and approval to which the device is subject before it can be marketed to consumers:

Our manufacturing quality system is required to be in compliance with the Quality System Regulations enforced by FDA and similar regulations enforced by other worldwide regulatory authorities. FDA’s Quality System Regulations require manufacturers to follow stringent design, testing, process control, documentation, and other quality assurance procedures.

Our first generation Aerodentis System is a Class II medical device, which was cleared by FDA for commercialization in the U.S. pursuant to the 510(k) notification process for movement and alignment of teeth during orthodontic treatment of malocclusion in April 2020. We are preparing to apply for 510(k) clearance for the updated version of the currently cleared device. Such updated Platform contains new and/or different components than the original device, which is why a new 510(k) clearance is required prior to marketing the Platform in the U.S. We have not yet filed a 510(k) submission for the Platform, and it has, thus, not been found by the FDA to be substantially equivalent to the first generation Aerodentis System. The manufacture, marketing and distribution of the Aerodentis System, as well as our next-generation Platform once cleared by FDA, if ever, is subject to continuing regulation and enforcement by FDA and other government authorities, which includes routine FDA inspections of our facilities to determine compliance with facility registration requirements, product listing requirements, medical device reporting regulations, and Quality System Regulations, among others. If FDA finds that we have failed to comply with Quality System Regulations or other legal or regulatory requirements, it or other government agencies may institute a wide variety of enforcement actions against us, ranging from Warning Letters to more severe sanctions, including but not limited to financial penalties, withdrawal of 510(k) clearances already granted, and criminal prosecution. We have passed our International Organization for Standardization (“ISO”) and Medical Device Single Audit Program (“MDSAP”) certification process and have added the U.S. to our ISO/MDSAP certification in 2019.

The 510(k) Process

Under the 510(k) process, the manufacturer must submit to FDA a premarket notification demonstrating that the device is “substantially equivalent” to either a device that was legally marketed prior to May 28, 1976, the date upon which the Medical Device Amendments of 1976 were enacted, and for which a PMA is not required, a device that has been reclassified from Class III to Class II or Class I, or another commercially available device that was cleared through the 510(k) process. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. Clinical data is sometimes required to support substantial equivalence.

After a 510(k) premarket notification is submitted, FDA determines whether to accept it for substantive review. If it lacks necessary information for substantive review, FDA will refuse to accept the 510(k) notification. If it is accepted for filing, FDA begins a substantive review. By statute, FDA is required to complete its review of a 510(k) notification within 90 days of receiving the 510(k) notification. As a practical matter, clearance often takes longer, and clearance is never assured. FDA may require further information, including clinical data, to make a determination regarding substantial equivalence, which may significantly prolong the review process. If FDA agrees that the device is substantially equivalent to a predicate device currently on the market, it will grant 510(k) clearance to commercially market the device.

Post-Market Regulation

After a device is cleared or approved for marketing, numerous and extensive regulatory requirements may continue to apply. These include but are not limited to:

FDA has broad regulatory compliance and enforcement powers. If FDA determines that we failed to comply with applicable regulatory requirements, it can take a variety of compliance or enforcement actions, which may result in any of the following sanctions:

International Regulation

Many countries throughout the world have established regulatory frameworks for marketing and commercialization of medical devices. As a designer, manufacturer, and marketer of medical devices, we are obligated to comply with the respective frameworks of these countries to obtain and maintain access to these global markets. The frameworks often define requirements for marketing authorizations which vary by country. Failure to obtain appropriate marketing authorization and to meet all local requirements, including specific quality and safety standards in any country in which we currently market our products, could cause commercial disruption and/or subject us to sanctions and fines. Delays in receipt of, or a failure to receive, such marketing authorizations, or the loss of any previously received authorizations, could have a material adverse effect on our business, financial condition and results of operations.

There is currently no premarket government review of medical devices in the European Economic Area (“EEA”). However, all medical devices placed on the market in the EEA must meet the relevant essential requirements laid down in Annex I of Directive 93/42/EEC concerning medical devices, or the Medical Devices Directive. The most fundamental essential requirement is that a medical device must be designed and manufactured in such a way that it will not compromise the clinical condition or safety of patients, or the safety and health of users and others. In addition, the device must achieve the performances intended by the manufacturer and be designed, manufactured, and packaged in a suitable manner. The European Commission has adopted various standards applicable to medical devices. These include standards governing common requirements, such as sterilization and safety of medical electrical equipment, and product standards for certain types of medical devices. There are also harmonized standards relating to design and manufacture. While not mandatory, compliance with these standards is viewed as the easiest way to satisfy the essential requirements as a practical matter. Compliance with a standard developed to implement an essential requirement also creates a rebuttable presumption that the device satisfies that essential requirement.

On April 5, 2017, the European Parliament passed the Medical Devices Regulation (Regulation 2017/745), which repeals and replaces the E.U. Medical Device Directive and became effective on May 26, 2021. The Medical Devices Regulation, among other things, is intended to establish a uniform, transparent, predictable, and sustainable regulatory framework across the EEA for medical devices and ensure a high level of safety and health while supporting innovation. The new regulations, among other things:

We received our European CE mark and ISO/MDSAP certification in 2019. In light of our ISO/MDSAP certification, we believe that we are in substantial compliance with applicable E.U. regulations and do not anticipate having to make any material expenditures as a result of E.U. or other currently applicable regulatory requirements. Under Medical Devices Regulation, manufacturing facilities are subject to periodic inspections by regulatory authorities and must comply with device safety and effectiveness requirements as set forth therein. To that end, we have implemented controls and procedures intended to ensure that our Access Dental Lab Quality System meets FDA’s and ISO requirements. We passed our audit to renew our ISO/MDSAP certification in April 2023.

Quality System Regulations

Our manufacturing quality system is required to be in compliance with the Quality System Regulations enforced by FDA and similar regulations enforced by other worldwide regulatory authorities. FDA’s Quality System Regulations require manufacturers to follow stringent design, testing, process control, documentation, and other quality assurance procedures. If FDA finds that we have failed to comply with Quality System Regulations or other legal or regulatory requirements, it or other government agencies may institute a wide variety of enforcement actions against us, ranging from Warning Letters to more severe sanctions, including but not limited to financial penalties, withdrawal of 510(k) clearances already granted, and criminal prosecution. In addition, under Canadian regulation, manufacturing facilities are subject to periodic inspections by regulatory authorities and must comply with device safety and effectiveness requirements as required by the Medical Devices Regulation.

State Professional Regulation

Our ability to conduct business in each state is dependent in part upon that particular state’s treatment of remote healthcare delivery under such state’s laws, rules and policies governing the practice of dentistry, which are subject to changing political, regulatory and other influences. Orthodontists and dentists who provide professional services to a patient via teledentistry must, in most instances, hold a valid license to practice or to provide treatment in the state in which the patient is located. In addition, certain states require an orthodontist or dentist providing telehealth services to be physically located in the same state as the patient. Failure to comply with these laws and regulations can give rise to civil or criminal penalties.

Other U.S. Federal and State Laws

We are also subject to various laws inside and outside the U.S. concerning our relationships with healthcare professionals and government officials, price reporting and regulation, the promotion, sales and marketing of our products and services, the importation and exportation of our products, reimbursement for our products and services, the operation of our facilities, and the distribution of our products. Initiatives sponsored by government agencies, legislative bodies, and the private sector regarding these matters, including efforts to limit the growth of healthcare expenses generally, are ongoing in markets where we do business. It is not possible to predict at this time the long-term impact of such cost containment and other measures on our future business.

We intend to enter into contracts with orthodontists, dentists, or professional corporations to deliver our products and services to their patients. Such contractual relationships will be subject to various state laws that prohibit the practice of dentistry by lay entities or persons and are intended to prevent unlicensed persons from interfering with or influencing the orthodontist’s or dentist’s professional judgment. In addition, laws in various states also generally prohibit the sharing of professional services income with nonprofessional or business interests. Activities other than those directly related to the delivery of healthcare may be considered an element of the practice of dentistry in many states. Under the corporate practice of dentistry restrictions of certain states, non-clinical decisions and activities may implicate the restrictions on the corporate practice of dentistry. We will continually monitor state requirements as to what constitutes the practice of dentistry and take steps to ensure that the orthodontists and dentists who utilize our services and teledentistry platform handle all clinical aspects of their patients’ care to ensure we do not violate those laws and regulations.

As a participant in the health care industry we are subject to extensive and frequently changing regulation under many other laws administered by governmental entities at the federal, state, and local levels, some of which are, and others of which may be, applicable to our business. Laws regulating medical device manufacturers and health care providers cover a broad array of subjects.

Several states have fraud and abuse and consumer protection laws that apply to healthcare items or services reimbursed by any third-party payor, including commercial insurers, not just those reimbursed by a federally funded healthcare program, or apply regardless of payor. The scope of these laws and the interpretations of them vary from state to state and are enforced by state courts and regulatory authorities, each with broad discretion. A determination of liability under such laws could result in fines and penalties and restrictions on our ability to operate in these jurisdictions.

Health Information Privacy and Security Laws

There are numerous U.S. federal and state laws and regulations related to the privacy and security of PII, including health information. Among others, the federal Health Insurance Portability and Accountability Act of 1996, as amended by HITECH, and their implementing regulations, which we collectively refer to as HIPAA, establish privacy and security standards that limit the use and disclosure of PHI and require covered entities and business associates to implement administrative, physical, and technical safeguards to ensure the confidentiality, integrity, and availability of individually identifiable health information in electronic form, among other requirements.

Violations of HIPAA may result in civil and criminal penalties. We must also comply with HIPAA’s breach notification rule which requires notification to affected individuals and HHS, and in certain cases to media outlets, in the case of a breach of unsecured PHI. The regulations also require business associates of covered entities to notify the covered entity of breaches by the business associate.

State attorneys general also have the right to prosecute HIPAA violations committed against residents of their states, and HIPAA standards have been used as the basis for the duty of care in state civil suits, such as those for negligence or recklessness in misusing personal information. In addition, HIPAA mandates that HHS conduct periodic compliance audits of HIPAA covered entities and their business associates for compliance.

Many states also have laws that protect the privacy and security of sensitive and personal information, including health information. These laws may be similar to or even more protective than HIPAA and other federal privacy laws. For example, the laws of the State of California, are more restrictive than HIPAA. Where state laws are more protective than HIPAA, we must comply with the state laws we are subject to, in addition to HIPAA. California passed the California Consumer Privacy Act or CCPA on June 28, 2018, which went into effect January 1, 2020. On November 3, 2020, the California Privacy Rights Act of 2020 (“CPRA”), which amends the CCPA and adds new privacy protections that became effective on January 1, 2023, was enacted through a ballot initiative. While information we maintain that is covered by HIPAA may be exempt from the CCPA, other records and information we maintain on our patients may be subject to the CCPA. In certain cases, it may be necessary to modify our planned operations and procedures to comply with these more stringent state laws. Not only may some of these state laws impose fines and penalties upon violators, but also some, unlike HIPAA, may afford private rights of action to individuals who believe their personal information has been misused. In addition, state and federal privacy laws subject to frequent change.

In addition to HIPAA and state health information privacy laws, we may be subject to other state and federal privacy laws, including laws that prohibit unfair privacy and security practices and deceptive statements about privacy and security, laws that place specific requirements on certain types of activities, such as data security and texting, and laws requiring holders of personal information to maintain safeguards and to take certain actions in response to a data breach.

Foreign data protection, privacy, and other laws and regulations are often more restrictive than those in the U.S. The E.U., for example, traditionally has imposed stricter obligations under its laws and regulations relating to privacy, data protection and consumer protection than the U.S. In May 2018, the General Data Protection Regulation (the “GDPR”), which governs data practices and privacy in the E.U., became effective and replaced the data protection laws of the individual member states. GDPR requires companies to meet stringent requirements regarding the handling of personal data of individuals in the E.U. These more stringent requirements include expanded disclosures to inform members about how we may use their personal data, increased controls on profiling members, and increased rights for members to access, control and delete their personal data. In addition, there are mandatory data breach notification requirements. The law also includes significant penalties for non-compliance, which may result in monetary penalties of up to 20 million Euros or 4% of a company’s worldwide turnover, whichever is higher. GDPR and other similar regulations require companies to give specific types of notice and informed consent is required for the placement of a cookie or similar technologies on a user’s device for online tracking for behavioral advertising and other purposes and for direct electronic marketing, and the GDPR also imposes additional conditions in order to satisfy such consent, such as a prohibition on pre-checked consents. It remains unclear how the U.K. data protection laws or regulations will develop in the medium to longer term and how data transfer to the U.K. from the E.U. will be regulated. Outside of the E.U., there are many other countries with data protection laws, and new countries are adopting data protection legislation with increasing frequency.

Many of these laws may require consent from individuals for the use of data for various purposes, including marketing, which may reduce our ability to market our products.

There is no harmonized approach to these laws and regulations globally. Consequently, we increase our risk of non-compliance with applicable foreign data protection laws and regulations when we expand internationally. We may need to change and limit the way we use personal information in operating our business and may have difficulty maintaining a single operating model that is compliant. Compliance with such laws and regulations will result in additional costs and may necessitate changes to our business practices and divergent operating models, limit the effectiveness of our marketing activities, adversely affect our business, results of operations, and financial condition, and subject us to additional liabilities.

Environmental Matters

We have no material expenditures for compliance with Federal, State or local provisions regulating the discharge of materials into the environment, or otherwise relating to the protection of the environment.

Employees

As of April 15, 2024, the Company had 3 full-time employees and 1 part-time employee.

Company Information

Our principal executive offices are located at Shatner Street 3, Jerusalem, Israel, and our telephone number is +972 (0)74-700-6700.

Our web page address is www.aerodentis.com. References to our website address do not constitute incorporation by reference of the information contained on the website, and the information contained on the website is not part of this document or any other document that we file with or furnish to the SEC.

Management

Officers and Directors

The following persons became our directors and executive officers on August 14, 2023 and hold the positions set forth opposite their respective names as of April 15, 2024:

Directors and Executive Officers

Information concerning our directors and executive officers is set forth below. The biographical description of each director includes the specific experience, qualifications, attributes and skills that led the Board to conclude that such person should serve as a director.

Eliyahu (Lee) Haddad

Mr. Haddad has served as our Chief Executive Officer and director since December 2021. Mr. Haddad is a multi-disciplinary finance and technology expert, with extensive senior level operational experience in raising capital, growing complex business models, and guiding startups and later stage companies to successful exits. Prior to his employment at Dror, Mr. Haddad served as Chief Executive Officer of HFT Investments from 2007 through 2021. He also served as a Senior Adviser at Exceed Talent Capital between 2019 and 2023. Over the course of his 30-year career, Mr. Haddad has structured and managed a number of technology and media transactions valued at an aggregate of over $85 billion, including $250 million in transactions within the Israeli high-tech space in AI, medical technology, and cybersecurity. Mr. Haddad received a bachelor’s degree in economics and philosophy from Columbia University, where he was the recipient of the National Science Foundation Award in Theoretical Physics and started his career in the M&A subgroup of Morgan Stanley’s media and technology group for several years. We believe that Mr. Haddad’s extensive business experience qualifies him to serve as a member of our Board.

Moshe Shvets

Mr. Shvets has served as a director and as our Chief Technology Officer since July 20, 2020. Mr. Shvets has also served as a Senior Vice President since December 1, 2021. Mr. Shvets is a seasoned senior executive with 25 years of experience in building companies with over €250M yearly revenues that involve complex instrumentation & processes, regulation, software, and global infrastructure. Prior to joining Dror, Mr. Shvets founded and served as a director of BiSec Ltd. from 2015 to 2018. Mr. Shvets has also served as president of OAO Belzan from 2011 to 2013, and president of OAO DZV from 2011 to 2014. Before joining the management team, Mr. Shvets was one of the investors in our Company. Mr. Shvets received a bachelor’s degree from Saint Petersburg State University in Aerospace Instrumentation in 1999. We believe that Mr. Shvets’s extensive experience commercializing new technologies qualifies him to serve as a member of our Board.

Chaim Hurvitz

Mr. Hurvitz has served as a director and Chairman of our Board since January 17, 2012. Mr. Hurvitz has founded and has served as a chief executive office of C.H. Health, a healthcare focused venture capital firm since May 2011. His investments through CH Health have included several successful exits including the NASDAQ IPOs of Galmed Pharmaceuticals Ltd. (NASDAQ: GLMD) (“Galmed”) and UroGen Pharma Ltd. (NASDAQ: URGN) (“UroGen”). He was previously a member of Teva’s senior management, serving as the President of Teva International Group from 2002 through 2010, Vice-President of Israeli Pharmaceutical Sales from 1999 through 2002 and President and CEO of Teva Pharmaceuticals Europe from 1992 through 1999. Mr. Hurvitz presently serves the chairman of Univo Pharmaceuticals Ltd., the chairman of Shirat Hachaim Ltd., a director of Celexir, a director of Genoscience Pharma S.A.S., and has previously served as the chairman CTG Weld Limited, the chairman of PolyPid Ltd. (NASDAQ: PYPD), as the chairman of Galmed, as a director of UroGen, and as a director of Teva Pharmaceuticals Industries Ltd. (NYSE: TEVA). Mr Hurvitz is also a member of management of the Manufacturers Association of Israel and Head of its Pharmaceutical branch. Mr. Hurvitz received a B.A. in political science and economics from Tel Aviv University in 1985. We believe that Mr. Hurvitz’s extensive management experience in the healthcare industry qualifies him to serve as a member of our Board.

Chaim Ravad

Mr. Ravad has served as a director since February 2015. Mr. Ravad has experience in food catering and real estate industries. In his capacity as our director, Mr. Ravad has served as a major contributor to the development of Dror’s teeth straightening product from its early stages and until receipt of FDA and CE approval and has in the past successfully assisted in securing private investments in our Company. Mr. Ravad is a graduate of Hebron Yeshiva.

Yehuda Englander

Mr. Englander has served as a director since December 6, 2021. Mr. Englander is a co-founder of YYE ALEY SHLECHT ASSETS LTD. and YE RUT Finance Ltd. Prior to that, Mr. Englander led Yehuda Englander Finance Advisory Ltd. for four years. Mr. Englander received a B.A. in Accounting from Lev Academic Center at Jerusalem College of Technology. We believe that Mr. Englander’s extensive investment experience qualifies him to serve as a member of our Board.

Involvement in Certain Legal Proceedings

None of the members of the Board or our executive officers has, in the last ten years, been involved in any legal proceeding of the type described under Item 103(c)(2) or Item 401(f) of Regulation S-K.

Director Independence

Our Common Stock is quoted on the OTC Pink Market operated by the OTC Markets Group Inc., which does not have director independence requirements. We also have not established our own definition for determining whether our director and nominees for directors are “independent” nor have we adopted any other standard of independence employed by any national securities exchange.

We expect our Board, in the future, to appoint an audit committee, nominating committee and compensation committee, and to adopt charters relative to each such committee. We intend to appoint such persons to committees of the Board as are expected to be required to meet the corporate governance requirements imposed by a national securities exchange, although we are not required to comply with such requirements until we elect to seek a listing on a national securities exchange. In addition, we intend that a majority of our directors will be independent directors, of which at least one director will qualify as an “audit committee financial expert,” within the meaning of Item 407(d)(5) of Regulation S-K, as promulgated by the SEC. We do not currently have an “audit committee financial expert” since we currently do not have an audit committee in place.

Family Relationships

There are no family relationships among our directors or executive officers.

Executive Compensation

The following table sets forth summary compensation information for the respective fiscal years. For the purpose of this prospectus, our “named executive officers” or “NEOs” are our principal executive officer (“PEO”), Mr. Haddad, and our sole non-PEO executive officer, Mr. Shvets. We provide a description of the employment arrangements with Mr. Haddad and Mr. Shvets, below under “Employment Agreements.” The following table includes all compensation earned by our named executive officers for the respective period, regardless of whether such amounts were actually paid during the period.

This discussion may contain forward-looking statements that are based on our current plans, considerations, expectations and determinations regarding future compensation programs.

Summary Compensation Table

The following table sets forth information concerning the compensation of our named executive officers for the fiscal years indicated below.

Narrative Disclosure Regarding Summary Compensation Table

Our Board reviews compensation annually for all employees, including named executive officers. In making compensation determinations, the Board considers compensation for comparable positions in the market and with peer companies, the historical compensation levels of executives, individual performance as compared to the board’s expectations and objectives, the board’s desire to motivate employees to achieve short- and long-term results that are in the best interests of our stockholders and a long-term commitment to our Company.

Annual Base Salaries

Base salaries for the executive officers are initially established through arm’s-length negotiations at the time of the executive officer’s hiring, taking into account such executive officer’s qualifications, experience, the scope of his or her responsibilities and competitive market compensation paid by other companies for similar positions within the industry and geography. Base salaries are reviewed periodically, typically in connection with our annual performance review process, and adjusted from time to time to realign salaries with market levels after taking into account individual responsibilities, performance and experience. In making decisions regarding salary increases, we may also draw upon the experience of members of the Board with executives at other companies.

Bonus Compensation

For 2023, our named executive officers are not eligible to receive a discretionary annual bonus based on individual and company performance. During fiscal year 2022, Messrs. Haddad and Shvets earned discretionary bonuses as set forth in the Summary Compensation Table above.

Equity-Based Incentive Awards

Our equity-based incentive awards are designed to align our interests and those of our stockholders with those of our employees and consultants, including our named executive officers. We have historically used stock options as incentives for long-term compensation to the named executive officers as the return on such awards is tied to an increase in our stock price. We may grant equity awards at such times as our Board determines appropriate in their discretion. Additional grants may occur periodically in order to incentivize executives with respect to achieving certain corporate goals or to reward them for exceptional performance. See “Outstanding Equity Awards at Fiscal Year-End” below for additional information regarding outstanding equity awards held by our named executive officers as of December 31, 2023.

Employment Agreements

Eliyahu (Lee) Haddad

On December 6, 2021, Private Dror entered into an employment agreement (the “Haddad Employment Agreement”) with Mr. Haddad to serve as Private Dror’s chief executive officer. Pursuant to this employment agreement, Mr. Haddad is entitled to a monthly salary (including all social benefit payments provided under Israeli law) of $22,256. Mr. Haddad is also entitled to an annual bonus based on achievement of objectives and Board’s approval. In connection with his employment agreement, Mr. Haddad was granted options to purchase five percent (5%) of our fully diluted Ordinary Shares issued and issuable on the date of the employment agreement, which options shall vest in three tranches on the first, second, and third anniversary of the date of the employment agreement. The options are subject to accelerated vesting upon the achievement by us of certain performance milestones. We cannot terminate Mr. Haddad’s employment not for “cause,” and in circumstances constituting “cause,” we may terminate the agreement effective immediately. Mr. Haddad can terminate the agreement for convenience upon 30 days written notice, and may terminate the agreement immediately for “good reason.” If Mr. Haddad’s employment is terminated without cause, or Mr. Haddad resigns for good reason, he is entitled to twelve month’s salary.

Following the closing of the Share Exchange, the Board appointed Mr. Haddad to the office of Chief Executive Officer on the terms of the Haddad Employment Agreement.

Moshe Shvets

On January 26, 2022, Private Dror entered into an employment agreement (the “Shvets Employment Agreement”) with Mr. Shvets to serve as Private Dror’s Senior Vice President, effective as of December 1, 2021. Mr. Shvets was named Chief Technology Officer as of July 20, 2020. Pursuant to his employment agreement, Mr. Shvets is entitled to a monthly gross salary of NIS 32,000. Mr. Shvets is also entitled to certain social and fringe benefits as set forth in the employment agreement. In connection with his employment agreement, Mr. Shvets was granted options to purchase three percent (3%) of our fully diluted Ordinary Shares issued and issuable on the date of the employment agreement, which options shall vest in three tranches on the first, second, and third anniversary of the date of the employment agreement. The options are subject to accelerated vesting upon the achievement by us of certain performance milestones. Mr. Shvets’ employment can be terminated by either party for convenience upon 30 days written notice.

Following the closing of the Share Exchange, the Board appointed Mr. Shvets to the office of Chief Technology Officer on the terms of the Shvets Employment Agreement.

Outstanding Equity Awards at Fiscal Year-End

The following table presents information regarding outstanding equity awards held by our named executive officers as of December 31, 2023.

Equity Incentive Plans

2021 Share Incentive Plan

Prior to the Share Exchange, Private Dror adopted the Dror 2021 Share Incentive Plan (the “2021 Plan”), which provides for the granting of stock options, restricted stock, restricted stock units, and other stock-based awards to employees, directors, officers, consultants, and advisors of Private Dror or its affiliates. Under the 2021 Plan, 51,482 ordinary shares of Private Dror were initially reserved for issuance as awards, and stock options covering up to 44,365 ordinary shares of Private Dror (which were exchanged for stock options covering approximately 163,142,084 shares of Common Stock in connection with the Share Exchange) are outstanding as of the date hereof. No other type of equity award is currently outstanding under the 2021 Plan. As further described below, upon the closing of the Share Exchange, any stock options outstanding under the 2021 Plan were converted into stock options under the Dror Ortho-Design, Inc. 2023 Long-Term Incentive Plan (the “2023 Plan”). The 2021 Plan is filed as Exhibit 10.9 to the registration statement on Form S-1 of which this prospectus forms a part.

2023 Long-Term Incentive Plan

On August 14, 2023, our Board adopted the 2023 Plan. Under the 2023 Plan, we reserved 235,958,571 shares of our Common Stock for issuance as awards to our key employees, key contractors, and non-employee directors and those of our subsidiaries, of which 100% may be delivered pursuant to incentive stock options. A form of the 2023 Plan is filed as Exhibit 10.10 to the registration statement on Form S-1 of which this prospectus forms a part.

The 2023 Plan currently consists of the primary plan document that governs all awards granted under the 2023 Plan for eligible U.S. employees, contractors, and non-employee directors who are subject to U.S. income taxation and a sub-plan annex designated for the purpose of grants of equity awards to eligible Israeli employees, officers, and contractors of the Company and its affiliates who are subject to Israeli income taxation.

Upon the closing of the Share Exchange, we became the sponsor of the 2021 Plan, and all outstanding stock option awards previously granted under the 2021 Plan will be converted into awards under the 2023 Plan. Thus, all outstanding options to purchase ordinary shares of Dror (which are converted into options to purchase shares of Common Stock of the Company pursuant to the Share Exchange Agreement, as amended) were converted to options to purchase shares of Common Stock of the Company.

The purpose of the 2023 Plan is to provide an incentive to attract and retain the services of key employees, key contractors, and non-employee directors of the Company and its subsidiaries and to provide such persons with a proprietary interest in the Company through the granting of awards. The 2023 Plan will be administered by our Board or a committee of the Board (the “Committee”) consisting of two or more members. At any time there is no Committee to administer the 2023 Plan, any reference to the Committee is a reference to the Board. The Committee will determine the persons to whom awards are to be made, determine the type, size and terms of awards, interpret the 2023 Plan, establish and revise rules and regulations relating to the 2023 Plan, and make any other determinations that it believes necessary for the administration of the 2023 Plan. The Committee may delegate certain duties to one or more officers of the Company as provided in the 2023 Plan. Unless terminated earlier by our Board, the 2023 Plan will expire on August 14, 2033. No awards may be made under the 2023 Plan after its expiration date, but awards made prior thereto may extend beyond that date.

The 2023 Plan provides for the granting of incentive stock options, nonqualified stock options, stock appreciation rights, restricted stock, restricted stock units, performance awards, dividend equivalent rights, and other awards which may be granted singly, in combination, or in tandem, and which may be paid in cash or shares of the Company’s Common Stock. Awards granted pursuant to the 2023 Plan will be evidenced by a written award agreement. The Committee will determine the terms of each award at the time of grant, including, without limitation, the number of shares subject to such award, the term of the award, the exercise price to be paid for the award (if applicable), the vesting and forfeiture conditions, the methods by or forms in which shares will be delivered to participants, the price to be paid for the award (if any), and any other terms and conditions applicable to such award.

To date, no awards have been granted pursuant to the 2023 Plan, other than the awards that were previously granted pursuant to the 2021 Plan and will be converted into an award under the 2023 Plan, as described above.

The Board may, at any time and from time to time, without the consent of the participants, alter, amend, revise, suspend or discontinue the 2023 Plan in whole or in part; provided, however, that (i) no amendment that requires shareholder approval in order for the 2023 Plan and any awards granted thereunder to continue to comply with Sections 421 and 422 of the Internal Revenue Code of 1986, as amended (the “Code”) (including any successors to such sections, or other applicable law) or any applicable requirements of any securities exchange or inter-dealer quotation system on which the Company’s Common Stock is listed or traded, shall be effective unless such amendment is approved by the requisite vote of the Company’s shareholders entitled to vote on the amendment; and (ii) unless required by law, no action by the Board regarding amendment or discontinuance of the 2023 Plan may adversely affect any rights of any participant or obligations of the Company to any participant with respect to any outstanding award under the 2023 Plan without the consent of the affected participant.

Commitments to Grant Stock Options

In addition to the stock option awards to be granted in substitution of stock options currently outstanding under the 2021 Plan, we currently have a commitment to issue options to purchase up to 0.5% of the outstanding shares of Common Stock to Mr. Haddad, contingent on the Company achieving certain market capitalization targets. We anticipate issuing these options pursuant to the 2023 Plan at such time as the Company has a sufficient number of authorized and unissued shares of Common Stock.

Director Compensation

The following table presents the total compensation for each person who served as a non-employee member of our Board during the fiscal year ended December 31, 2023. Other than as set forth in the table and described more follow below, and as set forth in the Summary Compensation Table with respect to our employee directors, we did not pay any compensation to, reimburse any expense of, make any equity awards or non-equity awards to, or pay any other compensation to any of the other members of our Board in 2023. 

Securities Authorized for Issuance under Equity Compensation Plans

The table below sets forth certain information as of December 31, 2023 regarding the shares of our Common Stock available for grant or granted under stock option plans and other compensation arrangements that (i) were adopted by our stockholders and (ii) were not adopted by our stockholder. 

Description Of Capital Stock

The following summary of the material terms of our capital stock is not intended to be a complete summary of the rights and preferences of such securities. The full text of the Amended Charter and Bylaws of Dror are included as exhibits to the registration statement of which this prospectus forms a part. You are encouraged to read the applicable provisions of Delaware law, the Amended Charter and Bylaws in their entirety for a complete description of the rights and preferences of our securities.

Authorized Capital Stock

We have authorized 3,266,975,740 shares of capital stock, par value $0.0001 per share, of which 3,254,475,740 are shares of Common Stock and 12,500,000 are shares of “blank check” preferred stock.

As of the date hereof, there are 495,454,546 shares of Common Stock outstanding.

Capital Stock Issued and Outstanding

We have issued and outstanding securities on a fully diluted basis as follows:

Common Stock

Pursuant to our Amended Charter, holders of our Common Stock are entitled to one vote for each share held on all matters submitted to a vote of our stockholders. Holders of our Common Stock have no cumulative voting rights. All shares of our Common Stock validly authorized and issued, fully paid and nonassessable.

Holders of our Common Stock have no preemptive, redemption, conversion or subscription rights. No sinking fund provisions are applicable to our Common Stock. Upon liquidation, dissolution or winding-up, holders of our Common Stock are entitled to share in all assets remaining after payment of all liabilities and the liquidation preferences of any of our outstanding shares of preferred stock. Subject to preferences that may be applicable to any outstanding shares of preferred stock, holders of our Common Stock are entitled to receive dividends, if any, as may be declared from time to time by our board of directors out of our assets which are legally available. Such dividends, if any, are payable in cash, in property or in shares of capital stock.

A holders of one-third of the voting power of the stock issued, outstanding and entitled to vote thereat, present in person or represented by proxy, will constitute a quorum for the transaction of business at any meeting of our stockholders. If, however, such quorum is not present or represented at any meeting of the stockholders, then either (i) the chairperson of the meeting, if there be one, or (ii) the stockholders entitled to vote at the meeting, present in person or represented by proxy, will have power to adjourn the meeting from time to time, without notice other than announcement at the meeting, until a quorum is present or represented.

Preferred Stock

Our board of directors has the authority, without further action by the stockholders, to issue up to 12,500,000 shares of preferred stock in one or more series and to fix the designations, powers, preferences, privileges, and relative participating, optional, or special rights as well as the qualifications, limitations, or restrictions of the preferred stock, including dividend rights, conversion rights, voting rights, terms of redemption, and liquidation preferences, any or all of which may be greater than the rights of the Common Stock. Our board of directors, without stockholder approval, can issue convertible preferred stock with voting, conversion, or other rights that could adversely affect the voting power and other rights of the holders of Common Stock. Preferred stock could be issued quickly with terms calculated to delay or prevent a change of control or make removal of management more difficult. Additionally, the issuance of preferred stock may have the effect of decreasing the price at which our Common Stock is quoted for sale, and may adversely affect the voting and other rights of the holders of Common Stock.

Series A Preferred Stock

The terms of the Preferred Shares are as set forth in a Certificate of Designation of Preferences, Rights and Limitations (the “Certificate of Designation”) filed with the Secretary of State of the State of Delaware as Annex A to the Amended Charter, which Certificate of Designation designated 12,500,000 shares out of the authorized but unissued shares of our preferred stock as Series A Preferred Stock with a stated value of $1.10 per share. There are 10,463,362.24 shares of Series A Preferred Stock issued and outstanding. The following is a summary of the principal terms of the Series A Preferred Stock and is qualified in its entirety by reference to, the Certificate of Designation.

Dividends

The holders of Series A Preferred Stock will be entitled to dividends, on an as-if converted basis, equal to and in the same form as dividends actually paid on shares of Common Stock, when and if actually paid.

Voting Rights

The shares of Series A Preferred Stock are entitled to vote with holders of the Common Stock on all matters that such holders of Common Stock are entitled to vote upon, in the same manner and with the same effect as the holders of Common Stock, voting together with the holders of Common Stock as a single class. Each share of Series A Preferred Stock shall entitle the Holder thereof to cast that number of votes per share of Series A Preferred Stock equal to the number of Conversion Shares into which such share of Series A Preferred Stock is convertible into pursuant to the Certificate of Designation (after giving effect to any applicable limitation on conversion under the Certificate of Designation). As long as any shares of Series A Preferred Stock are outstanding, we may not, without the approval of a majority of the then outstanding shares of Series A Preferred Stock (a) alter or change the powers, preferences or rights given to the Series A Preferred Stock, (b) alter or amend our amended and restated certificate of incorporation, the Certificate of Designation, or our amended and restated bylaws in such a manner so as to materially adversely affect any rights given to the Series A Preferred Stock, (c) authorize or create any class of stock ranking as to dividends, redemption or distribution of assets upon a Liquidation (as defined below) senior to the Series A Preferred Stock, or (d) enter into any agreement to do any of the foregoing.

Liquidation

Upon any liquidation, dissolution or winding-up of the Company, whether voluntary or involuntary (a “Liquidation”), the then holders of the Series A Preferred Stock are entitled to receive out of the assets available for distribution to stockholders of the Company the same amount that a holder of Common Stock would receive if the Series A Preferred Stock were fully converted (disregarding for such purposes any conversion limitations hereunder) to Common Stock which amounts shall be paid pari passu with all holders of Common Stock.

Conversion

The Series A Preferred Stock is convertible into Common Stock at any time at a conversion price of $0.011, subject to adjustment for certain anti-dilution provisions set forth in the Series A Certificate of Designation (the “Series A Conversion Price”). Upon conversion the shares of Series A Preferred Stock will resume the status of authorized but unissued shares of preferred stock of the Company.

Conversion at the Option of the Holder

The Series A Preferred Stock is convertible at the then-effective Series A Conversion Price at the option of the holder at any time and from time to time.

Automatic Conversion

On the trading day immediately following any day the Company is able to satisfy some or all of its reservation requirements pursuant to the Certificate of Designation (the “Automatic Conversion Time”), all, but not less than all, of the outstanding shares of Series A Preferred Stock for which Common Stock has been reserved will automatically convert, without any action on the part of the holder thereof and without payment of any additional consideration, into that number of shares of reserved Common Stock, determined by dividing the stated value of such share of Series A Preferred Stock by the Series A Conversion Price. The Company will provide prompt written notice to the holders of Series A Preferred Stock of the Automatic Conversion Time on the trading day immediately following the Automatic Conversion Time.

Beneficial Ownership Limitation

The Series A Preferred Stock cannot be converted to common stock if the holder and its affiliates would beneficially own more than 4.99% (or 9.99% at the election of the holder) of the outstanding common stock. However, any holder may increase or decrease such percentage to any other percentage not in excess of 9.99% upon notice to us, provided that any increase in this limitation will not be effective until 61 days after such notice from the holder to us and such increase or decrease will apply only to the holder providing such notice.

Preemptive Rights

No holders of Series A Preferred Stock will, as holders of Series A Preferred Stock, have any preemptive rights to purchase or subscribe for common stock or any of our other securities.

Redemption

The shares of Series A Preferred Stock are not redeemable by the Company.

Negative Covenants

As long as any shares of Preferred Stock are outstanding, unless the holders of more than 50% in stated value of the then outstanding shares of Preferred Stock shall have otherwise given prior written consent the Company shall not, subject to certain exceptions, (a) enter into, create, incur, assume, guarantee or suffer to exist any indebtedness, (b) enter into, create, incur, assume or suffer to exist any liens, (c) amend its organizational documents in any manner that materially and adversely affects any rights of the holders, (d) repay, repurchase or offer to repay, repurchase or otherwise acquire any shares of its common stock, common stock equivalents or junior securities, (e) enter into any transaction with any affiliate of the Company which would be required to be disclosed in any public filing with the SEC, unless such transaction is made on an arm’s-length basis and expressly approved by a majority of the disinterested directors of the Company, (f) declare or pay a dividend on junior securities or (g) enter into any agreement with respect to any of the foregoing.

Trading Market

There is no established trading market for any of the Series A Preferred Stock, and we do not expect a market to develop. We do not intend to apply for a listing for any of the Series A Preferred Stock on any securities exchange or other nationally recognized trading system. Without an active trading market, the liquidity of the Series A Preferred Stock will be limited.

Private Placement Warrants and Share Exchange Warrants

In connection with the Private Placement and the Share Exchange, we issued to holders of Series A-4 Warrants and to the Private Placement Investors five-year Warrants to purchase up to an aggregate of 964,834,419 shares of Common Stock at an exercise price of $0.033 per share. We are prohibited from effecting the exercise of any Warrant to the extent that as a result of such exercise the holder of the exercised Warrant beneficially owns more than 4.99% in the aggregate of the issued and outstanding shares of our Common Stock calculated immediately after giving effect to the issuance of shares of our Common Stock upon the exercise of the Warrant. The Warrants contain provisions that protect their holders against dilution by adjustment of the purchase price in certain events such as stock dividends, stock splits and other similar events.

If at the time of a Warrant’s exercise there is no effective registration statement registering, or no current prospectus available for, the resale of the Warrant Shares, then the holder will have the right to exercise the Warrant by means of a cashless exercise. In addition, if (i) the volume-weighted average price of our Common Stock for 20 consecutive trading days is at least 300% of the exercise price of the Warrants, (ii) the dollar trading volume of our Common Stock for each trading day within such 20-day trading period equals or exceeds $500,000, (iii) a registration statement providing for the resale of the Warrant Shares is effective and such registration statement has been effective for six (6) months, (iv) the holder of the Warrant is not in possession of any information provided by the Company that constitutes material nonpublic information and (v) the Company has not breached any of the terms of the documents governing the Private Placement (regardless of if such breach has been cured), then we may redeem the Warrants at a price of $0.001 per Warrant up to one-half, in the aggregate, of the Warrants upon not less than 20 days’ prior written notice of redemption to each holder, subject to certain customary restrictions.

Potential Effects of Authorized but Unissued Stock

We have shares of Common Stock and preferred stock available for future issuance without stockholder approval. We may utilize these additional shares for a variety of corporate purposes, including future public offerings to raise additional capital, to facilitate corporate acquisitions or payment as a dividend on the capital stock.

The existence of unissued and unreserved Common Stock and preferred stock may enable our board of directors to issue shares to persons friendly to current management or to issue preferred stock with terms that could render more difficult or discourage a third-party attempt to obtain control of our company by means of a merger, tender offer, proxy contest or otherwise, thereby protecting the continuity of our company’s management. In addition, our board of directors has the discretion to determine designations, rights, preferences, privileges and restrictions, including voting rights, dividend rights, conversion rights, redemption privileges and liquidation preferences of each series of preferred stock, all to the fullest extent permissible under the DGCL and subject to any limitations set forth in our Amended Charter. The purpose of authorizing our board of directors to issue preferred stock and to determine the rights and preferences applicable to such preferred stock is to eliminate delays associated with a stockholder vote on specific issuances. The issuance of preferred stock, while providing desirable flexibility in connection with possible financings, acquisitions and other corporate purposes, could have the effect of making it more difficult for a third-party to acquire, or could discourage a third party from acquiring, a majority of our outstanding voting stock.

Dividend Policy

We currently intend to use all available funds to develop our business and do not anticipate that we will pay dividends in the future. We can give no assurances that we will ever have excess funds available to pay dividends.

Anti-Takeover Effects of Certain Provisions of our Certificate of Incorporation, Bylaws and the DGCL

Amended Charter and Bylaws

Provisions of our Amended Charter and Bylaws may delay or discourage transactions involving an actual or potential change in our control or change in our management, including transactions in which stockholders might otherwise receive a premium for their shares, or transactions that our stockholders might otherwise deem to be in their best interests. Therefore, these provisions could adversely affect the price of our Common Stock. Among other things, our Amended Charter and Bylaws:

Delaware Law

We are subject to Section 203 of the DGCL. Section 203 generally prohibits a public Delaware corporation from engaging in a “business combination” with an “interested stockholder” for a period of three years after the date of the transaction in which the person became an interested stockholder, unless:

Section 203 defines a business combination to include:

In general, Section 203 defines an “interested stockholder” as any entity or person beneficially owning 15% or more of the outstanding voting stock of the corporation and any entity or person affiliated with, or controlling, or controlled by, the entity or person. The term “owner” is broadly defined to include any person that, individually, with or through that person’s affiliates or associates, among other things, beneficially owns the stock, or has the right to acquire the stock, whether or not the right is immediately exercisable, under any agreement or understanding or upon the exercise of warrants or options or otherwise or has the right to vote the stock under any agreement or understanding, or has an agreement or understanding with the beneficial owner of the stock for the purpose of acquiring, holding, voting or disposing of the stock.

The restrictions in Section 203 do not apply to corporations that have elected, in the manner provided in Section 203, not to be subject to Section 203 of the DGCL or, with certain exceptions, which do not have a class of voting stock that is listed on a national securities exchange or held of record by more than 2,000 stockholders. Our Amended Charter and Amended Bylaws do not opt out of Section 203.

Section 203 could delay or prohibit mergers or other takeover or change in control attempts with respect to us and, accordingly, may discourage attempts to acquire us even though such a transaction may offer our stockholders the opportunity to sell their stock at a price above the price at which our Common Stock is quoted for sale.

Security Ownership of
Certain Beneficial Owners and Management

The following table sets forth information regarding the beneficial ownership of Common Stock as of April 15, 2024:

Unless otherwise indicated below, beneficial ownership is determined according to the rules of the SEC, which generally provide that a person has beneficial ownership of a security if he, she, or it possesses sole or shared voting or investment power over that security, including options and warrants that are currently exercisable or exercisable within 60 days.

The beneficial ownership percentages set forth in the following table are based on 495,454,546 shares of Common Stock and 10,463,363 shares of Preferred Stock, which are entitled to cast an aggregate of 749,721,570 votes, outstanding as of April 15, 2024.